The company Västra Mälardalens Kommunalförbund, VMKF, wishes to revise and optimize their present data and IP-telephony network as of today consists of the three municipalities Köping, Arboga and Kungsör. As a municipal corporation, they seek consultation regarding internal as well as external review and investigation of the main structure of the network, its functionality and safety. By today?s increasing demands of Internet accessibility, availability of services and security far more extends the requirement of a complete network design. The foundation of networking rests on the balance between each of these necessities.

This masters thesis consists of a translation of acts I-IV from Dion Boucicault?s play London Assurance, a theoretical comment on the translation and a comparative study of asides. It is divided into four parts: an introduction, presenting the work and my translation strategy, as well as a short stylistic analysis; source text and translation; a theoretical comment, mainly based on theories from the field of Translation Studies, but also theories on lingustics and literature; and a comparative study of the use of asides as a theatrical convention in English and Swedish drama.The main focus of my translation strategy is to keep or adapt features that give the audience a sense of the cultural context where the play takes place, as well as the time ? fashionable society in early Victorian England, while providing a text that is performable and speakable for the actors, and which preserves the humor present in the source text. .

In previous studies there has been indications that multilingualism has a delaying effect of the onset of dementia and damage on cognitive abilities (Bialystok et al., 2007; De Bot & Makoni, 2005, s. 58). Cognitive abilities refers to memory, attention, language, abstract thinking and understandings among other things (Läkemedelsverket). Other studies have seen that individuals with Alzheimer's disease (Swedish abbreviation AS from here on) have difficulties with managing a conversation (Hyltenstam & Stroud 1989). This study aims to describe the topic treatment in bilingual individuals with AS and compare their different languages.

Background: An effective management of the healthcare's organization on one disaster site is considered as a condition in order to decrease damages and suffering at them as been hit of an accident. In KAMEDO-reports is described true accidents, how among other thing organizational parts been implemented and evaluations of which importance different decisions had. Aim: The aim of the study was to examine KAMEDO-reports concerning prehospital medical management on disaster sites. Method: Eight KAMEDO-reports was examined with focus on organization and management. Results: Four areas in which all could be influenced by the healthcare personnel in leading position was described: Management and Co-operation, Load and Go - Stay and Play, Priority and Triage.

AbstractA useful tool for companies to use in their differentiation process is proposed to be employee branding. Employee branding is developed and put forth by the management with the main task to formulate the brands vision and values, and communicate them to the employees. To promote the employee engagement and their relationship with the company, corporate storytelling can be applied, with is an internal communication that strengthens the internal rumour and values that represent the brand. Since engagement and motivation is important factors when creating a strong employee brand, there is a need for further research on how corporate storytelling is used by companies to influence employee engagement and motivation, as corporate storytelling leads to deeper commitment among employees.PurposeThe purpose of this paper is to explore how companies use corporate storytelling to influence their employee branding.MethodologyThe authors conducted a qualitative case study on how the retail organization Boomerang. The empirical material was collected thru semi-structured interviews with Boomerangs management and employees.ConclusionThe conclusion shows that the employees prefers when corporate storytelling and various communication is put in context, this because it?s easier for the employees to understand.

The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.

I did my degree project together with Universeum AB. The project had the work title: children?s world and the aim were to give children between 3-8 years old a place that was especially made for them. With their interests and needs in mind the area should trigger play but also learning through a well planned pedagogical environment.I did this project because I thought this was an excellent opportunity to really practise my new gained skills I had learned during my two years in CCD (Child Culture Design). It also gave me the opportunity to actually see how well my knowledge was working when it was put to the test, and I did learn a lot from this.Together with a crew of 6 people I developed and designed the area.

This study aims to examine how the interventions for homeless persons in the municipality of Kalmar are organized. The study is based on four half-structured qualitative interviews with both representatives from different instances and also from persons who have experience of being homeless.The theoretical bases we have used to analyze the material are organization theory, specifically the concept of bureaucracy. Our results show that homelessness is not seen as a problem in itself, since the general view is that homeless people often have a complex problem scenario where drug- and alcohol abuse and mental illness are common.It is often the latter that takes priority in the interventions and the housing question is therefore neglected. We also found that social services do not have a satisfactory structure around the organization of the work on homelessness. They do not have any specific device in Kalmar that focus on homelessness issues with the result that the existing units are forced to take care of the work of homelessness.

My essay is concerned with intercultural leadership and practical knowledge. The essay is about ethical dilemmas and the diversity of issues we face constantly at the preschool. In my story I examine the different views of knowledge and the opportunities to lead people in an intercultural way, and how they relate to each other. I start by looking at the ethical ideas that form the basis for our actions and our view of knowledge. Then, I examine how the practical wisdom guides the ethical dilemmas that arise at the preschool.

Homelessness has always been and will always be a problem in every society. How should we organize the work and care for these people? There are three different types of welfare states, the liberal, the conservative and the social democratic. In the liberal welfare state the market is the supplier of the public good. In the conservative state the family and church and in the social democratic the state is the supplier of the public welfare.The Swedish welfare state has been the archetype of social democratic welfare with de principal of ?Folkhemmet? in focus.

This report describes the design and implementation of a multi-master, packet based protocol for small and tiny microcontrollers where resources are limited. The protocol was named "Tiny Controller Network" or TCN for short. The protocol is meant mainly as a control bus for automation and sensor acquisition applications but due to its flexibility can also be used for other purposes as well. It borrows some of its functionality and design ideas from the well known CAN bus and Modbus but also has a number of major differences like the use of standard hardware and time synchronisation. One of the key aspects during the design was the use of very little system resources and common on-chip hardware peripherals like a UART.

The purpose of this master?s thesis is to examine how some university students, who are using the libraries extensively, use and experience the public and the university library and what they expect from the two different library types. I also compare their expectations with the different tasks and aims of the two library types. To answer this I have interviewed seven students at the department of history of literature at Göteborg University. I have also studied some literature and research related to this subject, for example user studies about students and libraries and the information behaviour of distance students.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

The purpose with this project is to explore and verify three renovating systems for Miljonprogrammet (common expression forbuildings constructed during the years 1965-1975 when over a million houses where built in Sweden) to take measure to thelargely transmission losses of these buildings. Many of the buildings from this period have similar constructions and thereforethe same techniques can be used to renovate several of them. This project only considers the climate scale, although thereare many more factors to concern for to efficient the buildings of Miljonprogrammet.This thesis presents examples of renovations carried out using two of the three renovation systems.The essay presents a reference house of choice on which we apply the three systems and calculate the new U-values,consumption of energy and the investment costs. The new U-values the building is given is matched to the values ofrecommendation for passive houses. Our reference house is a two story apartment building, located in the village ofLammhult, with brick facades at the ends and plaster at the long sides.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.