In the next few years the pollutants loading at the Slottshagen wastewater treatment plant in Norrköping is going to increase due to the reason that one of the waste water treatment plant in the district will be shut down.A survey of how these different pollutants are divided in the treatment process is therefore necessary for mapping out both the loading and treatment efficiency.This can be achieved by studying mass balances.Mass balances were carried out for the water treatment process for the mechanical/chemical,biological and the chemical stage.The mass balance studies show that the treatment efficiency was very good. However in order for the mass balances to be quite consistent and to ensure complete coverage of results and conclusions i.e. more reliable results, sludge samples should be collected and taken at different times per day and the influent rate should be investigated.In this work mass balance has been set up in order to illustrate and identify the factors that should be considered and taken care of for further estimation using mass balances in the future. Furthermore this survey results in a calculating model for the mass balances at thisplant.This calculating model is used as a tool to facilitate future calculations for mass balances for the water treatment process at Slottshagens wastewater treatment plant.Moreover it provides a basis for carrying out further estimation of the treatment process in the near future.In this project the importance of some operating parameters was also taken in consideration.This calculating model can be modified so that calculations of such operating parameters i.e. sludge loading and sludge age can be easily performed.Such information can be used further to evaluate different operation alternative in order to ensure an optimal use of the treatment process with in the plant..

 The aim and scope of this study is to describe the coordination of joint efforts concerning chemicals and hazardous substances in the Baltic Sea region, between the Swedish Chemicals Agency (KemI) and the land-based pollution group of the Helsinki Commission (HELCOM LAND). Based on the description of the coordination, the second aim is to discuss the consequences for the Swedish Chemicals Agency in its policy shaping work towards a nontoxic environment. A qualitative and descriptive case study method is used for this purpose. Theories of coordination and achievement-inducing criteria for environmental goals are applied to the case. Components and related processes of coordination are applied to the descriptive part of the study, whilst the achievement-inducing criteria are applied in the discussion.

The investigation analyzed the implementation and application of the Swedish National Archives' new Process-Oriented Archives Description Model to activities of the hierarchical, function-oriented and decentralized university organizations.The basic reason why a new archive description has evolved is because documents are becoming more and more digital. It requires a new interpretation of how evidence is secured for their reliability and authenticity, and a new way of looking at provenance, for the purpose of describing and searching electronic documents. The new archive description model's logical structure is based on business processes.The relationship between the new archive description and a function-oriented organization's activities can be seen from the different outlooks of processes between archive activities and activities of the organization. It is also reflected in the modification that all universities have made ??of the new archive description model to be more flexible and pragmatic to fit a function-oriented organization.The relationship between provenance and process-oriented archive description is mainly the link between documents and business processes that produce them.

The number of products offered by retailers has increased immensely during the last two decades, which has resulted in an increase of naming decisions having to be made. The importance of product names has become more significant for retailers offering their products online, as these are more visible to the customer in comparison to products offered offline. Consequently, it is of great value for retailers to gain knowledge about how a product name affects the customers' perception of the product. The purpose of this study is to examine whether product names affect customers perception of the relevant products in the online environment. This has been illustrated by applying the following theories to the relevant product names; meaningful and meaningless brand names as well as concrete and abstract words.

Lantmäteriet (the Swedish mapping, cadastral and land registration authority) has been laser scanning Sweden since 2009. From the laser scanned data a digital elevation model (DEM) in grid format, with a resolution of 2 m, is produced. This DEM is called GSD-Höjddata, grid 2+ and from its data and the laser point cloud itself (in the form of a las-file) contour lines can be extracted. Lantmäteriet has not yet done this, but plans to update the contour lines in their cartographic products exist. If this is to be done in a satisfactory way an evaluation of different methods for it is needed.

This investigation is a pilot survey whose main purpose is to investigate with work evaluation and attitude analysis whether the orthopedists and surgeons work can be equaled, why the wages differences exists between women and men, and also which preventive measures the organization can use to even out the wages differences between the genders. In relation with the investigation I have applied the reflexive way of thinking to establish which difficulties come up in the work of gender-equality.The result?s from work evaluation displays that the works are equivalent but the salaries are not, which can depend on value discrimination,gender discrimination and the organization theory.Wages differences between women and men depend on, according to the informers, partly by historical explanation and partly by the old directors who was allowed to retain regular salary when theypost transformed. The common point of view is that men have a larger work experience and therefore a higher salary.The managements attitude towards gender-equality issues is of absolute importance in order to achieve and bring a change within the organization.The measure positive special treatment is proposed to be used as an improving method to achieve (gender)equality between the posts and to even out the wages difference between the sexes.To establish whether or not gender discrimination exist in the investigated organization there needs to be done a whole lot supplementary studies like a complete wage (salary) mapping which includes all supplements and more interviews among the organizations all occupation groups..

The aim of this study was to map the prevalence of aeolian sand dunes in Västerbotten, northern Sweden to find dunes formed during earlier deglaciation phases, which was then preserved in cold-based conditions during the youngest stadial of the Weichselian glaciation. These preserved dunes were expected to be covered by a layer of till and have a rather faint morphology compared to dunes formed during the Holocene. Consequently, high resolution LIDAR-derived images from the Swedish mapping, cadastral and land registration authority (Lantmäteriet) was used to detect the dunes throughout an area covering most of Västerbotten, above the highest coastline and below the mountain range. The analysis resulted in several new findings of aeolian dunes compared to the findings in the quaternary soil map created by the Geological Survey of Sweden. Despite the fact some of the dunes at the LIDAR-derived image had a strange faint appearance, it was quickly evident during the fieldwork that the aeolian sand was not covered by till on any of the dunes visited.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

The depth-to-water-index (DTW-index) is derived from digital elevation models (DEM) to map soil wetness, in terms of distance from soil surface to the ground water table. The aim of this GIS based study was to investigate the existence of a relationship between DTW-index and forest site productivity (SP). The belief of such an assumed relationship was based on knowledge that the ground water level is related to site properties that can either promote or impede tree growth. Data primarily comprised rasters of the Krycklan catchment in northern Sweden and depicted DTW-index and a laser scanned vegetation height. The 100th height percentile of each pixel in the vegetation raster was assumed to mirror the top-height, letting it act as a relative measure of SP within a delineated area of equal stand age.

The interest in harvesting wood fuel in conflict stands has grown in recent years as a consequence of the increased demand for biofuel. Conflict stands are young forests that have not been cleaned and have a large number of stems ha-1with a great height and diameter distribution. This means that traditional field measurements in conflict stands are difficult and very time consuming. Therefore, the forestry sector is in need of new, more efficient inventory methods. In this study, the Lidar data from Lantmäteriet?s (the Swedish mapping, cadastral and land registration authorities) new national height model was used in combination with plots from the Swedish national forest inventory from 2009 to create functions for; height, volume, diameter and number of stems.

På grund av en ökad befolkningsmängd och nya tekniker som gör fler sjuka går att bota ställs nya krav på svensk sjukvård. Sjukvården måste möta de nya kraven med ett bättre effektivare resursanvändande och där till krävs nya förbättringsmetoder. Med influenser från industriell tillverkning har sjukvården omarbetat lean production för att skapa ett universellt förbättringsverktyg som lämpar sig för vårdorganisationer. Verktyget kallas lean healthcare och är omdiskuterat och dess effekter tvetydiga. Att undersöka om och hur värdeflöden i en akutmottagnings triage, som innebär en prioritering efter patienters allvarlighetsgrad, kan effektiviseras med hjälp av ett flödesorienterat arbetssätt som lean.

The production costs have steadily increased within the construction industry during the 21st century. Voices are raised meaning that the construction industry is too unsuccessful in making the production more efficient and to develop it?s way of working. One way to deal with the production costs is to minimise the waste, with waste meaning activities that doesn?t add value to the finished product.

This report is the result of a thesis work carried out on the Risifrutti production at the company Procordia Food AB. The thesis is at a master level and is the final work for the author to receive a Master of Science in Innovative production at Mälardalen University. The thesis comprises 30 credits and has lasted for 18 weeks. The thesis is mainly a research on whether it is possible to perform an Environmental Value Stream Map (E-VSM) in a food processing industry and an evaluation if the tools E-VSM and Green Performance Map (GPM) are useful in this type of industry. An extra part to this research is to use the results from the E-VSM and give Procordia Food AB information on improvement potentials in the Risifrutti production. The author has found it difficult to collect some of the quantitative data to the E-VSM, mainly regarding energy, but by using the Value Stream Mapping (VSM) tool and other Lean tools the author was able to identify and quantify several wastes in the Risifrutti production. Recommendations for improvements based on these wastes have been given to the company. In the research part of this report the utility of the Value Stream Map, Environmental Value Stream Map and Green Performance Map in a food processing industry have been analyzed. The author has found that the Value Stream Map has been a useful tool since waste and unevenness in the tact of the production has been identified. The Environmental Value Stream Map and the Green Performance Map are also great tools when a company wants to analyze their environmental impact and then invest in environmental improvements. However, no profound energy analyzes has been done in the Risifrutti production because of the lack of energy meters for steam, electricity and compressed air in the production lines..

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

In view of the difficulty of recruiting staff to care profession and in terms of the increasing need to find ways of ensuring a good language level in the profession, have an interest in language tests been revealed. The purpose of this paper is therefore to highlight the use of language tests for admission to the care courses for adults in Värmland. What provided This is a survey of the prevalence and an examination of the validity of the test. The issue that this study assumed is: How is language test in connection with admission to the certified health and social care courses for adults in Värmland? How well correlates intent of the use of the language test with the test's validity and reliability?The methods used to seek answers to these questions has been a combination of questionnaires and experiments.