The requirements for wastewater treatment plants (WWTP) are gradually increasing, partly because of higher incoming loads, which in turn require a more efficient treatment process. In parallel with environmental and economic goals there are also desires to lower energy consumption without compromising the wastewater treatment. Furthermore, there is a demand on WWTP´s to alter eutrophication in aquatic systems through better nitrogen and phosphorus removal. An increasing number of WWTP´s have acquired biological nitrogen and phos-phorus removal. A by-product of this type of biological treatment is the formation of nitrous oxide, which is a potent greenhouse gas.

Wastewater handling of private sewage systems has become an all increasing matter. In Stockholm region the 90 000 private sewage systems contribute with larger phosphorus flows to the Baltic Sea than the two biggest sewage plants in the area, Henriksdal and Käppala, contribute together, even though these two plants purify wastewater from more than one million inhabitants. When summer house areas turn into areas for permanent living ? transition areas ? the load on the existing systems increases, systems that already often are unsatisfying. In those areas it is not clear what the best system choice is; On-site systems for single households; Local collective systems or Connection to central systems.

The private sewage systems in Sweden releases around 600 tons of phosphorus per year, compared to about 350 tons from municipal sewage treatment plants, and they account for approximately 21% of the total anthropogenic discharge of phosphorus into Swedish waters. About 40% of Sweden's nearly 1 million private sewage systems are inferior with respect to emissions to surface and groundwater. The technology of small sewage plants is under development and knowledge of treatment effects for different solutions is poorly consolidated. Municipal authorities lack resources to keep up with the technologic development and assess the reliability of the treatment performances that suppliers report for their products. The thesis aims to conduct a market review and evaluation of wholly or partially prefabricated small sewage plants, to make it easier for municipalities and property owners to assess different technical solutions. The goal is a compilation of the products on the market, evaluated on the basis of the reliability of specified degrees of reduction.Information on sampling procedures and test results were collected through a questionnaire to all active suppliers and the responses were then used to classify the products.

There are around 855 000 on-site sewage systems in Sweden and some 1 800 of these are located in the municipality of Sigtuna. The Sigtuna local authority has set the goal that all sewage systems with insufficient function should be improved before the end of year 2010. A malfunctioning on-site sewage system may cause three main problems: spreading of diseases, discharge of eutrophicating compounds and wastage of resources. The municipality strives to reduce these problems already at the stage of granting permits for installation of on site sanitation systems. The municipality has recently adopted new guidelines, which demands certain minimum reductions for different compounds. The guidelines also state that it is preferred that neighboring house-owners cooperate in jointly built and operated sewage systems and that the system should be able to recycle plant nutrients.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

Filtermaterial av 75 % torv och 25 % kolaska har använts under 2 respektive 4 år för rening av avloppsvatten från två biltvättar. Jämförelse med Kristianstads kommuns riktvärden för avloppsvatten från fordonstvättar visar att filtren fungerat. För avfallsklassning krävs kunskap om innehåll av miljöfarliga ämnen i produkter som använts i tvätthallarna. I brist på kunskap om innehåll av ej analyserade miljöfarliga ämnen i filtren anses förbränning vara ett bra omhändertagande ur miljösynpunkt, då energi och aska återvinns..

The following study aims to investigate the environmental conditions of the harbor of Sk?rhamn, a small fishing community on the west coast of Sweden. The interest to do so rose as a newly built apartment residence failed to connect the sewage pipes of 18 apartments, causing the untreated sewage running into the sea. The parameters accounted for are the C/N ratio, total organic carbon (TOC) as well as total nitrogen present (TN) and ?13C in the top ten centimeters of a sediment core retrieved in the Sk?rhamn harbour.

AbstractThe dependency of fossil fuels in the transport sector causes large emissions of carbondioxide. This problem can we reduce by using vehicle gas from digested solid manure and leftover of pasture. I have studied the potential for this in the county of Västernorrland. Thepurpose is to investigate how much vehicle gas that can be extracted.One central, large scale digestion and upgrade plant should be placed in Härnösand. Theamount of pasture and manure that is economical and practical available is enough to produce2,7-3,5 millions Nm3 vehicle gas.

Högbytorp is Ragn-Sells? largest waste facility and it is located north of Stockholm. There is an old landfill still in use, but at the end of this year it will be closed. The waste deposited on the landfill can, through decomposition, give rise to a large amount of methane gas, which is an energy rich gas that can be used for heat and electricity production. To receive a relatively large amount of gas, the decomposition requires a high moisture content in the waste.

In a sustainable society the use of renewable energy and recycling of materials is of high importance. Wastewater treatment plants use large amounts of energy in the processing of wastewater. This study seeks to evaluate wastewater as an energy resource and to examine treatment plants potential to become sustainable energy producers. The study is based upon the internal processes of Himmerfja?rdsverket.

A renewed application for environmental permit for the Hovgården landfill in Uppsala shall be submitted before December 2004, therefore the municipality of Uppsala needs improved knowledge of the contents, mostly organic compounds in the leachate and they also want to find a method to minimize the emissions of these compounds. The purpose of this study was to find a practical and economical method based on chemical oxidation using oxidants. The oxidants investigated are Fenton's reagent, hydrogen peroxide, Oxypro, potassium permanganate and potassium persulfate. The study was made on untreated leachate and leachate that has been treated in an aerated dam followed by sedimentation dams collected from the Hovgården landfill, and alson on sludge water from sludge storage cells. The effects of the five oxidants have been established by analysing the UV absorbance at the wavelengths 253,7 nm and 260,0 nm at different pH values. The UV absorbance was used to indicate the amount of aromatic hydrocarbons in the water. Also analyses of iron and manganese were done after the experiments with potassium permanganate, hydrogen peroxide and Fenton's reagent.

Biogas is a renewable energy produced through anaerobic digestion, which means that organic matter is degraded by microorganisms under anaerobic conditions. The produced biogas can then be used for cogeneration, electricity, heat or upgraded to vehicle gas. Eskilstuna Energy & Environment AB has four digesters at Ekeby water sewage treatment plant, Eskilstuna. One of the biogas reactor (RK4) is equipped with a jet-mixing system while the remaining digester uses top-mixing. The mixing system is an important parameter to achieve optimum operating conditions for the process regarding gas production and degree of digestion.

The access to good sanitary facilities is an important factor that elevates the experienced living standard as it improves hygiene and reduces the transmission of deseases. The ratification of the millennium goals by 189 countries demonstrates that this is an important international issue. Together the countries have taken upon themselves that the proportion of the population that lacked access to sustainable safe drinking water and sanitary facilities in the year 2000 will have been reduced by half by the year 2015. In Peru, the construction of sewage pipe networks to transport the sewage out of the direct human environment is progressing. The safety and sustainability of these systems can be questioned, since in Peru the sewage seldom receive any treatment before being emitted to a recipient. This is taking place in Picota and sorrunding villages as well. In the last 25 years several systems implementing small-scale onsite treatment have been introduced throughout Latin America in an attempt to give more people access to sustainable and safe sanitary facilities, reducing water consumption and taking advantage of the agricultural values of the sewage fractions while protecting the environment from its negative impact. In this study three different sanitary systems and the effects of different population growths were compared.

Ground construction has to a large extent been dominated by traditional meth-ods during the last 50 years. Although the construction has been changed meanwhile innovations are not accepted. In collaboration with NCC Ltd Region South, I have examined a modern con-struction methodology that has been developed by NCC for future large pro-jects. The method is divided into two central phases. Phase 1 is? Single Pro-duction? which is a preliminary period for ground constructions to come.

Aluminium sulphate (Al2(SO4)3) is usually added during the drinking water treatment processin order to precipitate organic and inorganic material, resulting in aluminium-based drinkingwater treatment residual sludge (WTR). Since 2003 Swedish law no longer permits WTR tobe deposited in lakes, and there is an interest to explore the possibility to utilize WTR as soilamendment. The aim of this study was to examine the effects of WTR application on cropgrowth and concentrations of macronutrients and trace elements (including micronutrients andpotential toxic elements). A greenhouse pot experiment was conducted with three soils; a clayloam rich in phosphorous (P), a loamy sand rich in P, and a silty loam with a low soil Pconcentration, and two crop species Italian ryegrass (Lolium multiflorum Lam. cv.