With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

This study has investigated how urban vegetation can be used in a multifunctional way to support ecosystem services in urban environments. Nacka municipality is in the start-up phase of building what is to become Nacka city. This provides a unique possibility to study and analyse what role the vegetation play in making the city a healthy living environment and how it needs to be adapted in order to be resilient against changing climate conditions and how the effects of those changes can be regulated. The study further investigates how airborne pollution, caused by urbanization processes, can be regulated or reduced by vegetation or species selection. Methods used in this study were a combination of qualitative interviews and literature studies, seeking to answer the questions: Which specific ecosystem functions are needed in the urban environment and which aspects will influence the ecosystems ability to deliver the functions in demand? And which plant species have the right mechanisms needed to deliver those functions? These questions have been studied and analysed in a local based context where the local conditions ands site specific needs of Nacka define criteria for plant selection.

The building and plant sectors represent a large part of Sweden?s energy use. Putting energy requirements in public procurement as a tool for reducing energy consumption in the building and plant sectors is therefor an opportunity that operators can take advantage of. The aim of this thesis was to map the energy requirements in procurement that operators in the public sector use today in building and plant projects. The analysis was made with respect to if the energy requirements corresponded to the parts with large energy use in building and plant projects and also in which way energy requirements in procurement are written in the contract.

In this study potential health risks for employees in connection with handling of bottom ash and bottom ash water at a Municipal Waste Incineration (MWI) plant have been investigated. Air surrounding the bottom ash and the bottom ash water has been examined. MWI is one of the primary ways to manage solid household waste, and bottom ash is the main solid residue produced by the incineration process. Bottom ash constitutes about 15-20% of the original waste. The bottom ash is extinguished in a water bath (bottom ash water).The study was carried out in a MWI plant in Karlstad, Sweden.

This paper evaluates the prospects for utilizing aquaculture effluents as a nutrient source in organic hydroponic, as is the case in aquaponics. The development of organic hydroponics is dependent on replacing synthetic fertilizers with organically derived nutrients, such as those found in aquaculture effluents. Also, in hydroponic cultivation the establishment of a plant pathogen suppressive micro flora is part of the plant protection strategy. Therefore, both nutritional and microbial qualities of aquaculture water and organic hydroponic nutri-ent solution were analyzed and compared. Results showed both aquaculture water and or-ganic hydroponic solution to be deficient in a number of essential elements, although or-ganic hydroponic solution was closer to recommendations.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

A third party access to district heating networks has been proposed in Sweden, to increase the competition on the district heating market. Such third party access could create opportunities for the agricultural sector as an energy producer. This study describes the technical, economical and environmental prerequisites for a farmer cluster to build and run a heating plant, fueled with local wood fuel. The heating plant in the described scenario is 8 MW and will supply a village of 1000 houses, and is fueled with wood chips exclusively. Supplying a heating plant with fuel puts high demands on the logistics, since there need to be a continuous flow of fuel. In the scenario, wood residues from felling and thinning is stored in stacks in the forest, and a few times a year chipped and transported to a storage area at the heating plant. In the study, an estimation of the profitability has been made by estimating the cost of the investment, personnel, operating and maintenance costs and costs for the fuel and ash handling.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

This paper appeals to professionals working with green questions. It intends to create a discussion about which plant species that can be established in a fieldlayer of a naturelike planting on fertile agricultural land. To initiate the essay, a studie of which values that can be connected with an establishment of a fieldlayer was performed . A part of Tor Nitzelius Park in Alnarp, a so called naturlike planting on fertile agricultural land, was used as a model for the choice of species. With the aid of soil values, photos and a list of current species, interviews with four ecologists were performed.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Phosphorus is the single most potent contributor to eutrophication of freshwater and has also been shown to contribute to the toxic algae blooms in the Baltic sea. The dynamics and paths of losses of phosphorus from arable lands are not fully understood. It is known that phosphorus can be lost directly from plant material to water. In studies where plant material has been subjected to several freeze-thaw cycles, large amounts of phosphorus have been lost. Most studies have been conducted under field conditions, with many factors effecting the measured losses of phosphorus, such as weather and type of soil. This study was performed in a controlled environment without the presence of soil. Instead of soil, small glass beads were mixed with the plant materials in vessels, to make possible homogeneous leaching with water through the mixture of glass beads and plant materials. In this study, clover, ryegrass and dry straw were cut to pieces, approximately 2 cm long.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.