Concentration of protein in bovine milk is one of the most significant milk quality parameters, to a large extent determining the price for milk to the producer. Mastitis is a common disease among dairy cows, negatively affecting not only milk yield but also milk protein composition. Milk from mastitic cows tends to have lower cheese yield, negatively affected processability properties and sensory quality, due to changed protein quality and composition. Poorer milk protein quality would have an economically negative impact on dairy industry. Only few studies have investigated the short term effects of mastitis on milk protein composition.

The Swedish government has a goal of achieving a fossil-free vehicle fleet in 2030. Heavy transport constitutes a significant part of Sweden's transportation sector and the vehicles are driven almost exclusively by fossil fuels. Siemens has developed eHighway, a concept for electric road systems enabling electrification of trucks, in order to reduce the environmental impact of heavy transports. This study aims to investigate the potential that eHighway has on transporting iron ore from the mine of Mertainen to a processing plant in Svappavaara. Electrified trucks are compared with conventional trucks, and diesel and electric trains.The evaluation was made with respect to energy consumption, environmental impact, and cost.

A large part of the interactions between horse and rider during horseback riding takes place through the reins and the bit and devices for measuring the tension on the reins, rein tension meters, has fairly recently been developed. To safeguard the welfare of the ridden horse riders need to be aware of the rein tension they apply and actively work to decrease it. Furthermore, there is a need to develop the study of rein tension through new techniques and refined analysis procedures. A good-quality rein tension meter should be small in size, sensitive, durable and as accurate for light rein tension as for strong forces. Rein tension meters used in research on horse and rider interaction commonly depend on strain gauge technique for generating rein tension data.

During 40 years of industrial production, from the end of the 1890?s until the end of 1930?s, coal and wood distillation products were manufactured in AB Carbo?s tar factory along the River Gimån in Grötingen, in the county of Jämtland, Sweden. In accordance with the Swedish Environmental Protection Agency?s Methods for Inventories of contaminated sites, MIFO, the site in Grötingen has been identified as a potentially contaminated site. In order to determine whether toxic substances pose a threat to human health and ecological systems in the area, there was a need to investigate the presence of contaminants, their levels and potential for migration.

Purpose: This paper aims to describe the socialization process that audit associates experience within an auditing firm that is included in the Big 4-sphere. Our purpose is also to describe which attributes that characterize the organizational identity, and how these attributes are reflected in the self-image of the associates. Furthermore, we seek to explain how the socialization process has influenced the organizational identification. This subject is of interest since the business of auditing is facing higher demands from regulators and politicians, due to the bankruptcy of HQ-bank among others during the financial crisis in the beginning of the 21st century. Earlier research claims that the socialization process of recruits, especially in the initial state of the employment, has a major impact on their future values and attitudes in their job performance.

I dagens samhälle kretsar shopping inte bara kring själva produkterna som säljs, utan även om hur butiksmiljön är uppbyggd. Den visuella miljön och hur produkter presenteras har stor påverkan på kunders beteende och inköp. Ljus, ljud och färger påverkar våra sinnen både positivt och negativt, vilket butiker utnyttjar på olika sätt. Syftet med detta uppsatsarbete är att beskriva vad unga kunder (18-25 år) anser ska ingå i ett attraktivt och starkt butikskoncept. Syftet är också att undersöka hur unga kunder upplever likheter respektive skillnader gällande butikskoncept för butikskedjor och produktutvecklande varumärkesleverantörer.

Water is the most essential resource for life. In cases where drinking water is processed from surface water it is important to ensure the raw water is of good quality, and is suitable for processing through the water treatment plant.The drinking water for Västerås is sourced from Västeråsfjärden, in the western side of Lake Mälaren. The city itself is home to marinas, ports, a wastewater treatment plant, the Svartån outlet, sewage pumping stations and stormwater outlets. Because of the negative effects these activities have on surface water quality, Mälarenergi AB is interested in relocating the raw water intake point to Granfjärden, 10 km east of Västeråsfjärden. At Granfjärden the intake point would be less exposed to the activities in Västerås, and could be placed at a greater depth, resulting in better water quality.In this Master?s thesis the water quality and the pollution risks at Västeråsfjärden and Granfjärden sites are compared.

Purpose The purpose of this study is to evaluate the treatment results and adverse drug effects for 14 dogs receiving a new paclitaxel preparat named Paccal vet. The evaluated dogs are chosen to enter a pharmacogenomical study. Therefore, this paper intends to give an introduction to pharmacogenomics. Finally this study also aims at finding the homologue genesequenses in dogs to seven genes that are important for metabolism of paclitaxel in humans. Materials and metods The dogs went through 2-4 cycles of paclitaxel treatment, they received a new water-soluble formula named Paccal vet, at dosages of 100-150mg/m2. Treatment results and adverse effects are listed for each dog in table 1.

Logosol is a company that produce small-scale wood processing products. To be able to expand the business Logosol have decided to increase exports, their target markets are the US, Russia, Germany and Norway. The expansion has mainly been through subsidiaries situated on the abroad markets. The subsidiaries have done poor results and that has influenced the whole company. CEO Bengt-Olov Byström made a decision to sell out the units to the people who worked in the business.

This master thesis is performed at Scania Axles and Gearboxes, a production plant located in Södertälje. Within the plant axles, gearboxes as well as central gears are assembled from components to finished products. All production is conducted on production lines, with a pre-determined rate, which is supplied with components by the material handling department. Since the production quantity and the mix of product variants produced on the production line is customer order-based, the number and type of components needed for production as well as appropriate staffing within the material handling department is difficult to predict. Scania is currently using a number of different resource planning tools for each material handling-department within Axles and Gearboxes to visualize the workload within the departments.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

Denna uppsats har till syfte att undersöka om det är möjligt att som pedagog tälja leksaker i en barngrupp medan barnen leker. Undersökningen har även inriktats mot om det egna förhållningssättet till själva utförandet av att tälja leksaker, kan ha inverkan på barnens lek. En frågeställning har då varit om leksakers utformning har betydelse för barns fantasiutveckling. Den egna utvecklingen av gestaltningsförmågan har också observerats. En kvalitativ forskningsmetod har legat till grund för undersökningen som kan jämföras med en aktionsstudie.

The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.

Over an extended period of time there have been plans to establish a shared facility in Lennheden to extract groundwater from the Badelunda esker to provide drinking water for the cities of Borlänge and Falun. The city of Falun is dissatisfied with the quality of its drinking water and the city of Borlänge is concerned about the risk of contamination of its existing groundwater supply at its current location. To provide a basis for a decision on this issue, the company Midvatten AB has been commissioned to perform hydrogeological investigations in the area of Lennheden.The purpose of this thesis is to design a functional groundwater model of the area between Lennheden, place of planned extraction, and Övre Tjärna, place of existing extraction, to get a better understanding of the groundwater situation in the area. A groundwater model enables simulations of different scenarios in risk assessment and contaminant transport. The aim of the thesis is that the model can be used as an aid in Midvatten?s investigations in Lennheden and that it also can be used in future projects in the area.The model has been made in Processing Modflow 5.3 and encompasses an area of 19,5 × 11 km along the Badelunda esker and the river Dalälven between Djurmo and Frostbrunnsdalen.

With today`s business world, it is very important to deliver the right product with right quality and quantity at the right time. By ensuring that the staff are happy and have the opportunity to work in a workplace with good structure, the company will be able to reach these parameters and at the same time maximize the efficiency.The project has been carried out at Stena Stål AB in Värnamo. The company's main task is to cut, store and deliver production steel and tool steel to processing companies in the surrounding region. Stena Stål AB in Värnamo is one of total 21 companies in the company group Stena Stål. Stena Stål is a part of the Stena corporate group which owns a total of eight different company groups that are spread in about 250 different locations in 14 countries.The purpose of this report is to give Stena Stål AB in Värnamo suggestions on how to design a new facility for tool steel.