
Sökresultat:
4245 Uppsatser om Self-report instrument - Sida 14 av 283
Fuktrisker i kallvindsutrymmen - problem och förbättringsmetoder
This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.
Fastighetsel och belysning i flerbostadshus : inventering, mätning och effektivisering
This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.
Vädrets påverkan på byggarbetsplatsen
This exam report contains studies about how the weather affects the construction site from a planning and productivity perspective. In 1960?s the contractors started to build during the winter, since then the demands to obtain a good construction has been higher on both the contractor and then promoter.In this report you will see how the different actors at the construction site handle the weather problems. By several interviews of the actors at the construction site there have been opinions about the weather situation which has been collected. To get a wide perspective of the problem, field studies from four different construction sites been made.Weather statistics over Halmstad is a mayor part of this report.
Sexköpsförbudets vara eller icke vara : Prostitution och sexköp ur historiskt-, samhälls- samt individperspektiv
The aim of this study is to examine the language, used in parts of The day care report of 1968 (?1968 års Barnstugeutredning?). The day care report of 1968 was a public investigation appointed by the cabinet intended to prepare new policies on the part of the Swedish state. I focus on the change, which can be assumed to have occurred, when replacing the names ?day care? (?dagis/daghem?) and ?kindergarten? (?lekskola?) with the name ?preschool? (?förskola?).
Finns tröjan i grönt? : En retorisk analys av H&Ms Conscious Actions Sustainability Report.
As consumers we want to know from whom we buy, what we buy and the impact the company has on our planet. In recent years there been an increasing number of scandals concerning child labour, dangerous chemicals and falsely labelled meat. A good way for companies to communicate their environmental efforts is to establish a sustainability report, where they describe their work and their impact on our environment. By concentrating on H&M?s sustainability report, as well as conducting a rhetorical analysis, we have been able to focus on the following research questions: ? Why do companies establish CSR reports? ? How do companies gain legitimacy through their rhetorical choices? ? How do companies try to influence recipients? attitudes to the company? We begin by studying the context, which is of importance when using a rhetorical method and thereby attempt to understand in what situation the text is created.
Värmeledningsförmåga hos betong
This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.
Individen - kreativitet och kontext
Companies and organizations need to take care of their employees? creative ability. This report gives some examples of work situations that support or prevent creativity. The purpose with this report is to investigate the link between people at work and creativity.It was necessary to delimitate the area and decide which sources to be investigated and presented in the report. The main topic is on sources of creativity, but as more organizations seem to introduce efficiency thinking according to Börnfelt (2009), the interaction between efficiency and creativity is also presented.In this report theory is compared to industrial designers? opinions on creativity.
Dimensionering av ackumulatortank : Undersökning hur en ackumulatortank kan införas till Övertorneå fjärrvärmenät samt dess ekonomiska innebörd
This report will detail the participator view of partnering in Kvarteret Frodeparken. Kvarteret Frodeparken is a new construction project being jointly delivered by Skanska Sverige AB and Uppsalahem AB. The report will focus on the comparison between the participators view of partnering with an emphasis on common partnering goals. The report will also focus on the economical benefits, the time benefits and the social environment benefits you can find in partnering.The principals of partnering are; participants together make the common goals for the projects, make ice breaking activities to improve stakeholder engagement and working with an open economy to find the profitable choice for the project. With a combination of the three principals the team together decide the best solution for the project.
Termisk värmelagring i kontorsbyggnader
This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.
Jag har sepsis, identifiera den!
Sepsis är ett livshotande tillstånd som kan drabba patienter inom hela sjukvården där sjuksköterskans arbete är av stor betydelse. Dödligheten vid sepsis är oroväckande hög och är därmed ett viktigt område att uppmärksamma. Syftet med litteraturöversikten var att belysa hur sjuksköterskan med hjälp av omvårdnadsinsatser kan identifiera patienter med sepsis på en somatisk vårdavdelning. Metod: en litteraturöversikt med systematisk ansats har genomförts i databaserna PubMed och Cinahl. Resultatet baseras på tio kvantitativa artiklar där fyra teman uppkommit som innefattade sjuksköterskans kompetens, utbildning, samverkan och fysiologiska parametrar och instrument.
A study in web development : An onlinewatch store as a web application
This is a report on the development and implementation of the web shop ?Urballa Ur?, a web application developed by nine students at Linköping university. The report illustrates the methodology and process with intention to answer the question ?How can an online watch store be implemented to increase sales??. During the process the agile method scrum has been used as a working method.
Svarta toner : Federico Garcia Lorcas Duendebegrepp och dess spår hos Göran Tunström
The aim of this study is to examine the language, used in parts of The day care report of 1968 (?1968 års Barnstugeutredning?). The day care report of 1968 was a public investigation appointed by the cabinet intended to prepare new policies on the part of the Swedish state. I focus on the change, which can be assumed to have occurred, when replacing the names ?day care? (?dagis/daghem?) and ?kindergarten? (?lekskola?) with the name ?preschool? (?förskola?).
Statusvisare för diskmaskin
The following report is based on the graduate job course in CAD technician program year two. The work reflected in the report is done in collaboration with Hans-Erik Eldemark. This work includes the development of a progress bar for dishwashers.The execution of the thesis has involved a list of criteria with conditions and requirements, which after where weighted in a matrix. Subsequently, the product proposal was developed and has been divided into three categories, twist mechanisms, attachments and exterior design. Finally, suggestions have been designed in CATIA V5 and prototypes were produced using 3d-printing.
Banväljare till livsmedelsindustrin
This report is about the issue with decreasing production rate mainly caused by failuresrelated to the multiswitch. The multiswitch is a machine at Gefleortens Mejeriföreningwhich has the function of distributing milk cartons from one incoming track into fiveoutgoing tracks. Milk cartons who gets stuck and there by causes the production to stop,is the mainly problem with this constructionThe purpose with this report is to understand the causing factors and make suggestions which can help solving these factors. By analyzing the machine during production, having contact with different suppliers, searching internet for information, 3d-cad drawings and the complementary with personal experiences, this machine has been evaluated and as a result of this new problem has come to be known.The discovered problems was analyzed and resulted in new suggestions for alternative options. Later the most functional results was chosen and put as a suggestion for the new model.A new machine built with the suggestions from this report assures to be well adapted to the environment at Gefleortens Mejeriföreing and the problems it causes..
Materialval i utfackningsväggar
The aim of this report is to give a concise description of curtain walls, what it is and why they are used. It is also a description of six different but commonly used design technologies. By giving a detailed description of the different types and there special properties, the pros and cons will be clarified. The three most interesting alternatives were selected to be included in a test, to show the best alternative from a certain point of view.The parameters are:? Environment? Cost? Ergonomics? Isolation against noise and fire? DurabilityThese are important parameters in the planning and design phase.