The saw blade producer, Håkansson Sågblad AB, patented in the U.S. a new blade profiledesigned specially to cut fish and meat. The most important advantage of that blade is that its teethare not set, therefore the material lost when cutting is really smaller. The special geometry of thatprofile made that nobody had found a proper way to produce it before.The goal of the outlined work is to develop a machine to produce these new blades in afeasible way.The research approach of the project can roughly be divided into three phases:1.- Invention and development of a proper distribution of blades to produce a big amount ofthem at the same time.2.- Research of the best production process to produce the blades.3.- Main design of the machine to produce the blades.In the Thesis these three points are carefully developed and studied in the form of the startpoint of a really bigger project. Some tests had been done in order to prove all the analytical ideasand the results obtained had been satisfactory enough to give Håkansson the start point of a bigbusiness.

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better productivity. In conclusion, the report author tries to demonstrate what can lead to increased productivity and improved work experience..

With an increasing production of biogas follows an increased amount of digestate. This could potentially be a valuable source of fertiliser with the destruction of weed seeds as a possible advantage. However, there have been some concerns regarding the product still containing viable seeds of weed. In this Bsc thesis the results of previous research on the fate of weed seeds in biogas production is summarized. It is also a comparison of research on the effect of similar processes such as silage, compost or animal passage on seeds. The purpose of this is to evaluate risks of spreading viable seeds, potentially problematic species and perhaps to find out how to eliminate the risks. The literature review revealed that previous research mainly indicates low risks regarding many of the tested weed species, but not all studies show the same result, therefore extended research on the subject is desirable.

Traditionell systemutveckling präglas ofta av långa utvecklingsprocesser och en oförmåga attmöta förändrade behov från kunden. Problematik med buggar i mjukvaran och förskjutnadeadlines uppstår kontinuerligt och leder till högre kostnader för företag.För att komma till rätta med dessa problem behövs en systemutvecklingsprocess som belyserproblem direkt när de uppstår och därmed tvingar de inblandade till reflektion över processensom skapar problemen vilket belyser de verkliga bakomliggande orsakerna. Låg kvalitet påmjukvara är ofta ett symptom på djupare organisatoriska problemEtt synsätt som syftar till att möta dessa problem är lean software development. Synsättet harinspirerats av lean production som är en beskrivning av The Toyota Production system vilketi sin tur är det arbetssätt som har tillämpats av Toyota under flera decennier i den traditionellatillverkningen.Mary och Tom Poppendieck har beskrivit sju principer och 22 tankeverktyg som kananvändas för att skapa en metod för lean software development. Studien visar vilka styrkoroch problem som lean software development och lean production beskriver generellt samtvilka styrkor och problem som finns avseende beskrivning av Poppendieck's principer ochtankeverktyg i synnerhet.

Saab Training Systems (STS) in Huskvarna is manufacturing material for educationalpurposes to armies worldwide. They are now implementing parts of the Lean productionconcept in their organisation.One part of the work with Lean production is to eliminate waste. To be able to identify waste,value stream mapping is a good tool and also what we used in our thesis. To gain a betterefficiency in the production of Personnel Detector Device (PDD) flow was one of our goals.The PDD is a harness used during battle training which registers if the user is being hit by itsenemy.Our work with the thesis started up with a short education in Lean production and in valuestream mapping (VSM). The work proceeded with a VSM of the production flow of the PDD,interviews were made and studies of literature were done to gain greater knowledge of thesubject and solve the task.The VSM resulted in five areas which were followed up out of those six we identified.

The main purpose of this Master Thesis has been to investigate issues concerning apple fruit quality in orchards of Äppelriket Österlen. The goal has been to develop a document, for future benefit towards growers and company management in the production of high quality apples.In order to investigate main issues of fruit quality, focus has been on statistics concerning apple varieties, age of the apple trees, new planting, orchard size and growers opinions. Nine growers have been interviewed to investigate opinions and contribution of different growing techniques to increased fruit quality. The investigation showed high age of the trees in production and low rate of planting of new trees. Differences in fruit quality were highest between small orchards. Most growers were satisfied with their fruit quality and with their own measures made to improve it.

Watching television (TV) has been given a new meaning, you don?t have to book a specific time, a specific date if you don?t want to miss the program you were planning to see. In Sweden now days we can watch TV in lot of different ways, whenever we choose to do so. In this thesis I attempt to explain and document the process of shaping a tvformat, the development and adaptation to a time when the TV medium is in a change. Plus a look at how the television audiences relate to their use of it.

Production requires the input of capital and labour. Hence, economic growth can be assumed to follow from increased levels of these two factors. Policies aimed at increasing production may consequently successfully be focused on facilitating the accumulation of capital and labour. However, even when an economy has managed to reach the same quantities of input factors as a more prosperous neighbour, the level of the production might still differ. The explanation of this lies in what economists refers to as expression embracing the characteristics of the input factors and the conditions in which they operate.In this thesis a calculation of total factor productivity is carried out, using existing data on the Swedish FA-regions between 1990 and 2005 and the method the economist Robert Solow in the 1950?s.

As for today, a large quantity of protein feeds is imported from other countries to be used in the Swedish dairy production. The main import is soya from Brazil. The soya-production in Brazil results in negative consequences for the natural environment in the area, and the long transport of the feeds requires a lot of energy. The organic dairy production in Sweden is, with the highest probability going to be forced to use 100 % organic feed to the cows in the year 2005, due to new EU-rules. These are some of the causes why there are reasons to look closer at the possibilities to feed Swedish cows with only Swedish feeds. In this study, I have looked at the KRAV-rules for organic feeding, where the goal is feeding with only KRAV-approved feeds.

The purpose of this paper is to survey the textile based proto-industrialism in Sweden in the middle of the 19th century. This case study is founded upon Anders Hansson?s pre-industrial textile production at the estate of Mölneby, Östra Frölunda in the rural district of Kind in the province of Västra Götaland.Account books from the year 1853 related to Anders Hansson?s wool fabric manufacturing have been looked into and categorized using a quantitative research method. The research has also been supplemented with a number of interviews.The result of the survey shows that Anders Hansson?s business activities fit into Mendel?s theory of proto-industrialists at a practice level.By collaborating with a merchant in Gothenburg the fabrics were traded in unknown markets, as well as in more familiar neighbouring districts.

The soil acidification and the pH-value of the soil have been discussed for many years. Many observations of the tree species effects on the soil pH have been done. We have discussed the effects on the soil surface pH-value with a birch (Betula spp. L.) admixture in Norway spruce stands (Picea abies L.).We have used data from the Swedish National Forest Inventory. We have also discussed how the wood production and the biodiversity can be increased in mixed stands, in according to the Swedish forestry act Skogsvårdslagen. Our sampling areas are located in Norrland, Sweden. The results show a significant correlation between an increased birch admixture and an increased pH-value of the soil.

Today, buildings utilize 40 % of the total energy consumption. New energyrestrictions and directives have entered the construction industry. Photovoltaic is asustainable, clean and quiet solution that integrates well in the urban environment buthave not yet reached a breakthrough on the Swedish market. The conditions for solarenergy production are often set in the early planning stages where they rarely arebeing prioritized.This master of engineering project focuses on identifying problems regardingimplementation of photovoltaic in city development projects and giving suggestions topossible improvements in the planning- and construction process. It also givesrecommendations on how the conditions for energy production can be optimized inthe early zoning stage.By conducting simulations with PVsystV5.21, on three ongoing city developmentprojects in Umeå, Malmö and Stockholm and by carry out and analyzing interviewswith city planners, constructors and architects, some conclusions have been made.Several improvements, both politically, with changes in the subsidization systemand/or instatement of a new law with feed-in tariffs, and within the solar- andconstruction industry itself, with better communication between different parts of theprocess as well as better use of experience, can be made.

Insufficient intake of vegetables is a reason for micronutrient deficiencies and malnutrition in developing countries. With urbanization, globalization and a growing world population it is of major importance to secure sufficient food supply for the world?s population. Part of the solution to increased food security among the world?s poor could be the introduction of vegetable home gardens, plots for small scale vegetable production which can provide households with sufficient vegetables as well as serve as an extra income source. The study Improving peri-urban home gardens aims at examining the existence of vegetable home gardens in the peri-urban areas of Hyderabad, India.

Subclinical mastitis (SCM) is a well-known problem in the dairy sector, where it causes severe economic losses mainly due to reduced milk production. This is a problem not only in the western world but also in developing countries. Surveys from different developing countries have shown a SCM prevalence of 52.4 ? 88.6 % at cow level and 26.7 ? 63.2 % at quarter-level. To combat mastitis is important to optimize the milk production of the cow.

Title Becoming involved in the planning process - from the construction workers perspective.University/Institution Halmstad UniversityKeywordsEmpowerment through participation, construction workers involvement in decision making in the planning process, knowledge management and communication in the planning process, partnering, human resource managementAimThe aim of this bachelor thesis is to provide knowledge and examine how construction workers perceive involvement in the planning process of partnering projects, what they can contribute and what they get out of the planning process.Methodology The study was conducted with a qualitative approach in the form of semi-structured interviews.          The interview studie consist of 10 interviews with construction workers who are specially educated in participating in the planning process at the company ByggDialog AB.ConclusionAll respondents are positive to be involved in the planning process. The main advantages they can see is that they are able to influence technical solutions and methods that will be used later on in the production. Therefore it is important to consider when construction workers should be involved in the planning process so that they get the chance to influence in this decisions.When it comes to the decision making the construction workers should be involved in the decisions that are related to their tasks in the production such as technical solutions, choice of methods and materials. Their main duties and working hours should be in the production.Involvement in planning does not automatically mean that the construction workers are involved in the decision making, it is up to them how much they participate.