
Sökresultat:
2643 Uppsatser om Self-production - Sida 15 av 177
Kvalitetsbristkostnader: En kvalitetskostnadsuppföljning för produktion och eftermarknad. : En fallstudie vid Huddig AB
All companies wants? to be as profitable as possible. The company in question is one of the leaders in it´s field in Sweden. In order to increase profits as much as possible it is important to identify and eliminate eventual quality defect cost as far as possible.This study was performed in Huddig AB, and the purpose of this study is to try to develop a routine for monitoring the quality defect costs, and to improve communication and create feedback between production and aftermarket.In addition to an extensive literature review on quality defect costs most of the work have been conducted at the company. Own observations and interviews have been done with the staff to get a picture of the current situation and to try to come up with improvement proposals.During the study it was proved that much of the quality defect costs in essence, derived from the production, which is seen as positive because it is the easiest part of the company to improve.
Mätning av lean production : En fallstudie av kopplingen mellan balanced scorecard och lean production
Bakgrund: I takt med att konsumenters preferenser har förändrats, har företag fått överge massproduktion till förmån för produktionssystem som bättre avspeglar konsumenternas ökade krav på flexibilitet. Ett sätt för att överbrygga denna utmaning är att implementera lean production. Även om detta sätt att producera på har tydliga fördelar för dagens företag, verkar lean production även kunna medföra problem i avseende på att kombinera med den befintliga, i många fall, traditionella styrningen i företaget. En del av styrningen som verkar vara speciellt svår att kombinera med implementeringen av lean production rör mätningen av produktionen. Vid en närmare granskning visar det sig att det råder vissa motsättningar mellan traditionell mätning och lean production som kan påverka företagets beslutsfattande negativt.
BarnABC
This project is a learning CD-ROM production aimed at first-time parents. It is
using both sound and images, moving as well as non-moving. The purpose of the
production is to be an interesting alternative to traditional books. We have
been looking at similar productions like drivers license educational CD-ROMs
and encyclopedias for inspiration and ideas on how to proceed. In order to give
the content some dynamics, we've also added the element of 3D-animated
sequences.
The application is supposed to be run as a simple executable file with flash
embedded.
String Theory : att spela jazz pa? harpa
This master thesis is about the production of the record ?Brutus? with the band ?Trilobit?. Trilobit consists of the three musicians, myself, Stina Hellberg Agback on pedal harp, Simon Sva?rd on guitar and Karl Jansson on drums.During the production, I have analyzed different aspects of my own musicality and also the role of the pedal harp in jazz. I have found techniques that have simplified chromatic movements on the pedal harp, and also techniques that has developed the rhythmical aspect of my improvisation.I have also looked into my process in improvising and composing and developed new aspects, many thanks to the close collaboration with Simon Sva?rd..
Maasai herding and milking strategies : a case study of goals and decision-making within the household
In Kenya the Maasai pastoralists have based their livelihoods on dairy production and the production goal is to maintain a sufficient milk supply throughout the year. The pastoral dairy production has two vital characteristics; breeding and milking. Traditionally, breeding is the men?s responsibility, while milking is the duty of women. Depending on this partition of chores between men and women, they also have different management routines, ambitions and strategies regarding the milk production.
Energisparläge i automationsindustrin : Potential för att minska tomgångsförluster med industriella styrsystem
Former studies have shown that a considerable part of industries? energy usage can stem from idle times in the production. This thesis, carried out at Siemens Industry sector, evaluates the potential for using the control system to automatically put machines into energy saving mode during idle times. The main part of the thesis consists of a case study performed on machine tools at a Scania production site in Södertälje. Through load measurements the potential for energy savings was determined.The results show that there is a great potential for energy savings during idle times at the site.
High Cereal Prices : An analysis of the causes behind the increase in the world market price of corn, rice and wheat.
The purpose of this study is to examine which factors played an important role in the food price crisis of 2007-2008. Theories used are Microeconomic theory, explaining changes in supply and demand, and Macroeconomic theory, explaining the impact of changes in exchange rate on prices. A theory regarding speculation is also used to explain the impact of speculative activities effects on price. The method used is multiple regression analysis in order to determine the effects which ethanol production, oil price and dollar exchange rate had on the surge in the price of corn, rice and wheat.The data used is in monthly observations during the period 2005-2008. However, other factors are taken into consideration during the study, such as production quantity, stock size, economic growth, speculative activity and population growth.
Effektivisering av produkionsflödet för stora cylinderrör på Företaget AB
This study was conducted in autumn 2008 on the Company AB, which is currently in a growth phase. The company manufactures hydraulic systems for the heavy vehicle industry and has annual sales of approximately 250 MSEK with 165 employees.The rapid growth and unchanged planning is the starting point for this report. It all began in 2005 when the company received an unusually large order. During this period, the first priority was to satisfy customers and all other focus was disregarded. This has primarily resulted in a messy production and long throughput times.
Vem styr mitt arbete? Förändrade arbetsuppgifter vid datorisering av körschema
Abstract
This report is our bachelor thesis. Our work has taken place at a galvanising
company in Sölvesborg. The company faced major changes, of which one was a
computerisation process. The new system could involve changes in work practice
and in specific tasks, affecting the workers. If the coming system was to
support work, from the production personnel?s perspective, we felt a legitimate
participation in the development and design of the future work practice, was a
requirement that was not met.
During our ethnographical studies we noted that conflicts arose between
production and administrative -personnel.
Evaluating six crop mixes used for game fields in southwest Sweden : biomass production, fallow deer preference and species diversity
Game fields are one way to divert animals away from sensitive areas, create shelter and forage, and also to increase the biological diversity. In this study I investigated how the plant composition in six different crop mixes used for game fields affected the biomass production, biomass consumption and biological diversity at the Koberg estate in southwestern Sweden. Six experimental fields were used and each field contained six plots, approximately 1500 m2 each, that was sown with a different crop mix. The crop mixes ranged from a pure grass mix (A), 70 % grass and 30 % leguminous plants (B), 53 % grass, 21 % leguminous plants and 26 % other herbs (C), 100 % leguminous plants (D) to the most complex mixes constituting of 91 % leguminous plants and 9 % other herbs (E) and 87 % leguminous plants and 13 % other herbs (F). The fields were cut weekly during the summer in 2010, to estimate weekly biomass production.
Grovfoder för dikor
This literature review examines different forages which are well suited for suckle cow production in Sweden today. They should also be possible to cultivate in Sweden under the current circumstances. Crops suitable for grazing in Swedish climate but not used in Sweden today, but which may be relevant for Swedish conditions are also mentioned. In Sweden today, mainly grass silage, straw and hay are used as forage, but also wholecrop silage is used to some extent. However, concentrates are not used to a greater extent, since it contains too much energy.
Miljö- och samhällsekonomisk analys av behandling av biologiskt avfall
Biogas is a renewable fuel that can be extracted from anaerobic digestion of many differentsubstrates, for example biological household waste. An alternative handling of the waste is tomix it with other wastes and incinerate it in a combined heat and power (CHP) plant. Thisstudy uses life cycle assessment to investigate which type of waste handling that is betterfrom an environmental point of view, anaerobic digestion with biogas production orincineration. The results are based on a case study of a biogas production plant owned by thecompany Ragn-Sells in Vänersborg. The alternative is incineration at a CHP plant inGothenburg.
Fodder to ruminants within agroforestry systems in Rwanda - species and management
Rwanda is one of the poorest countries in the world and about 70-80 % of the population lives in rural areas. The land is strongly affected by land erosion which makes it difficult for the agriculture and food production. Agroforestry is a system where tree plantation is combined with livestock- and crop production. The system provides soil fertilization and binds the soil together. Some of the trees used in agroforestry systems are also used as fodder.
Journalistik 2.0 : Om journalistens upplevelse av medborgarnas inverkan på tidningarnas innehåll
Title: Journalism 2.0: About the journalist's perspective on citizen participation and its influenceon the news content.Purpose: The aim with this study was to examine whether, and if so how, professional journalists experience that the production of news has changed as the media development has progressed and the citizens opportunities for active participation in this process has potentially expanded.Research questions:Does professional journalists experience that the opportunities for citizen participation in the news making-process has changed with the spread and accessibility of new media- if so, in what ways?Wheatear professional journalists experience that the relationship between themselves and their news sources has changes with the spread and accessibility of new media?What consequences can an empowerment from citizens have on the production of news and on the professional role of the journalist?Theory: This essay is based on theories about convergence, gatekeeping, agenda building, participatory journalism, news sources and the journalistic profession.Method: The survey is based on ten qualitative interviews with ten professional journalists, eight reporters and two web editors from the newspapers NWT and VF.Results: The results of this survey shows that the citizens? opportunities in influencing the production of news has partly changed. The journalists do not experience that citizen participation affects their professional role. Citizens have always had an impact on the production of news but new technology offers citizens and journalists new channels that facilitate the communication and interaction. The gatekeeping process is protecting the decision-making role of the journalist, which restrains citizen participation.
Sammanställning och produktion av ritningsunderlag till båt
Hanterbara båtar is a new company who builds alumina boats customized for people in wheelchairs. Due to the fact that the company only built two boats yet, the production documentation is not complete. The drawing that does exist is not in an exact standard which makes production planning harder.The purpose of this work has been to make the production of the boat easier and simplify further development and modification. Product development in the form of optimizing details is also one of the main purpose of this work.This is all done by making a 3D-assembly of all the existing drawings. After this is done new drawings will be made and added to the main assembly.