Competition in the market of interior design during the last several years has drastically increased. The consumers of today are very conscious about what the market can offer and therefore they have high demands on the products. It is not only the function of the product that matters but also the design that makes a difference. Companies are becoming more aware of this and as a result they have to find a way to set themselves apart in order to attract customers. This realization has led designers and economists to cooperate in a different way than before.

In this essay we discuss how the decentralisation of the Swedish school system affects the concept of ?equal opportunity school?. We investigate the development from both a historical and contemporary perspective, in order to identify changes over time. The central question of the essay is how the decentralisation of the school system affects the teacher?s perspective and experiences of the government?s framework about ?equal opportunity school?? The analysis is based on four qualitative, semi structured, direct interviews with respondents both active in municipal schools situated in the Malmö council and with more than thirty years of experience in their profession. Our analysis of the interviews show that both respondents experience the overall situation in the schools has deteriorated from an equal opportunity aspect since the decentralisation of the school system.

This report deals with activities that from a CSR perspective are considered to create a shared value for a medium-sized construction company in Sweden. The CSR definition used in the report is the European Commission?s since it reflects the valuecreating aspects of CSR, in contrast to the traditional philanthropic aspect of CSR.Companies in the building construction industry have difficulties identifying activities that create value in society and in the company. The aim with the project is to, from a CSR perspective, identify and evaluate value creating activities in a building construction company. The activities will be evaluated with respect to competitiveness and how they can be implemented into an organization.

This thesis was conducted at AB Fredr Wagner in Ösmo in Nynäshamn, Sweden.AB Fredr Wagner provides solutions for the graphic industry and has been asked by acustomer to develop a product that can simplify handling of EUR-pallets, namely amechanical arrangement, further called pallet exchanger that can switch from anempty pallet to a fully loaded one using only hand force.The goal with the thesis was to create design documents for a pallet exchanger, andalso from those documents to manufacture a prototype for testing and evaluation.A field trip was made to the customer, IKAB mailing in Huddinge, where the palletexchanger is thought to be placed. The purpose of this field trip was to get an insightinto the current work condition and need of change, as well as to gather informationregarding the requirements when it comes to size and robustness of the palletexchanger. Existing equipment on the market that can perform similar tasks werestudied in order to find an optimal solution for the actual pallet exchanger.After the field trip and gathering of information the concept generating phase began.The method used for generating concepts was brainstorming. To decide on whichconcept to use, a concept selection matrix was created. The selection criteriaincluded in the matrix came from the requirements for the pallet exchanger.

Magnetic resonance imaging (MRI) has the potential to be used for the diagnosis and study of osteoarthrosis in the equine tarsal region. In the development of new diagnostic MRI techniques cadaver specimens are often used. To allow the use of cadaver legs for these types of studies it is important to know the effect of time after death on the MRI image. Since the relaxation times are temperature dependent, it is interesting to examine whether the time after death and the temperature of the cadaver may play a role in the image appearance and quality. The radio pulse sequences that show the different types of tissues are also important to know when pathological evaluation with MRI is used.

Theft without break-ins has increased significantly in the last year of swimming, sports and leisure facilities in Karlskrona, more precisely 60%. Vandalism in the shape of graffiti is another common crime. The solutions are divided into social and situational crime prevention. Social crime prevention engage in actions that are based on social causes of crime rather than the opposite situational crime prevention, which instead assumes that discourage with the help of technical solutions and has as primary objective to hinder accessibility for example theft friendly goods. The main purpose of this work is to come up with solutions to prevent these crimes, while also being cost-effective and realistic to implement.

This thesis describes the redesign ofequipment designed for drying bags thatis used in Fresenius Kabis´manufacturing of their nutritionmedicine in Uppsala. The need of thistask arise during the start of thedevelopment of a new packaging line werethis equipment were meant to be used. Anevaluation of the bagdryers capacity andcapability was necessary.The work started with gathering ofinformation from suppliers of the usedcomponents and from the responsibleengineers for this equipment. Aneducation to learn how the equipmentworked and how to operate it were taken.That was followed by the creation of astudy plan were the tests were plannedto test different parameters effect onthe drying result and to see if thebagdryer managed to handle the bags ofthe correct format in the pace that theequipment should be designed for.The test results detected a need ofdesigning a unit with a function thatholds the bags in place while passingthrough the dryer in order to attainhigh quality results. The results werelater used for optimization of thedesign.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution. The work proceeded with an extensive search for abrasive flow meters along with obtaining information about flow measurement in general. When the search for abrasive flow meters resulted in nothing all the efforts were concentrated on finding a principle of measurement that could cope with the criteria.

Lantmäteriet (the Swedish mapping, cadastral and land registration authority) has been laser scanning Sweden since 2009. From the laser scanned data a digital elevation model (DEM) in grid format, with a resolution of 2 m, is produced. This DEM is called GSD-Höjddata, grid 2+ and from its data and the laser point cloud itself (in the form of a las-file) contour lines can be extracted. Lantmäteriet has not yet done this, but plans to update the contour lines in their cartographic products exist. If this is to be done in a satisfactory way an evaluation of different methods for it is needed.

Betong är vårt vanligaste byggmaterial men cement står globalt sett för 5 % av CO2-emissionerna. Med detta som bakgrund så har CBI Betonginstitutet anordnat en tävling, där målet är att nå den högsta tryckhållfasthet i en resurssnål betong, med enbart 200 kg cement per m3. Syftet med denna rapport är att utvärdera tävlingen, vilket har utförts genom en omfattande litteraturstudie. En första analys av de olika betongrecepten medförde att olika grupperingar kunde urskiljas. Ur dessa fanns det tre stycken vars resultat var väldigt bra. ? Concrete Innovation Centre, som med ett lågt vct, stora mängder granulerad masugnsslagg (81 %) och lite silikastoft (5 %), uppnådde en tryckhållfasthet på 80 MPa vid 28 dygn och 95 MPa vid 56 dygn. ? CBI Stockholm, som genom användandet av ulltrafint filler och silikastoft (4,8 %), uppnådde en tryckhållfasthet på 84 MPa vid 28 dygn och 98 MPa vid 56 dygn. ? Thomas Concrete Group som genom att ersätta cementet med en medelmåttig mängd granulerad masugnsslagg (54 %), liten mängd flygaska (9 %), kalkfiller och silikastoft (5 %), uppnådde en tryckhållfasthet på 94 MPa vid 28 dygn och 98 MPa vid 56 dygn. Det finns således tre recept som vidare studier kan vara rättfärdigade på, de tre ovan nämnda. Det bör tilläggas att en imponerande tryckhållfasthet på nästan 100 MPa, kan uppnås i en betong med enbart 200 kg cement per m3. .

This report examines the prerequisites for LEDs to replace other technologies indifferent applications. How does the different technologies for light generationwork and what are the advantages and disadvantages? The various technologieslimitations and characteristics provides the opportunities for the LEDs.This report describes a test-construction built to examine what practical arrangementscan be built with modern light emitting diodes, in order to showsome of the possibilities. The construction consists of three different applications,a high power lamp based on cold white LEDs, one based on warm whiteLEDs for the evaluation of the light characteristics and a RGB-LED based lampable to mix any colors quickly and seamlessly. The test construction also containsthe essential peripherals including control-electronics, optics and a custombuilt watercooling solution.The potential for LEDs is huge but it is complicated to build LED based applicationsdue to the limitations which mainly includes the electronics and theneccesary cooling.

A key part in the development and verification of digital systems is simulation. But hardware simulators are expensive, and software simulation is not fast enough for designs with a large number of gates. As today?s digital zesigns constantly grow in size (number of gates), and that trend shows no signs to end, faster simulators handling millions of gates are needed. We investigate how to create a software gate-level simulator able to simulate a high number of gates fast.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

In recent years cognitive training in order to improve cognitive abilities have becomeincreasingly popular and a lot of research has been conducted within this field. The natural agingprocess has a negative effect on many of our cognitive abilities and this relationship also has a strongconnection with hearing loss. Elderly with hearing loss is therefore a group that could benefit fromcognitive training. Objective: The purpose of this study was to investigate different types of cognitivetraining directed towards working memory in older adults and to examine the results observedregarding efficacy of this type of training and its transfer effect. Method: A literature reviewconsisting of 17 scientific articles published between 2005-2014.

In the future the Swedish pension system will face major problems. With an increasing aging population combined with a decreasing share of working population the financing of the pension system is becoming a bigger problem than previously predicted. This means the individual himself will have a bigger responsibility to invest money for their future retirement. It has been shown that a large proportion of the people who invests for their future pension have neither the interest nor the time to actively invest their pension capital. To make it easier for those who invest for their retirement, some Swedish banks have created so-called generation funds.