The purpose with this work was to investigate some alternatives for an effective handling with grain, to find the most economic alternative. It is not common that moisture content is below 14% when harvesting grain in Sweden. To store the grain safe it has to be preserved in some way. I have described some of the most common systems for preserving grain in this paper. I have used the systems as a basis when I made calculations in handling the grain for a company. I have chosen a company placed in south of Sweden. The productions are crop farming and pork.

Totally 84 differentially expressed mRNA clones from infective L3 larvae of the parasite Haemonchus contortus, a blood sucking nematode, were analyzed with single strand hybridization assay (SSH). Altogether 79 clones were sequenced, edited, and compared with proteins found via BLAST in GeneBank. The aim was to investigate gene expression and potential protein expression following storage at 5 °C for 32 weeks. mRNA was extracted from fresh and stored L3. The SSH derived products were cloned into E.

The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.

This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

This bachelor?s degree thesis was conducted in mechanical engineering at Halmstad University during spring semester 2010 in close collaboration with the company Gremo AB, located in Ätran, Sweden. Gremo AB produces, developes and sales forest machines in both Sweden and on the international market.Gremo AB belongs to one of the market leaders in forest industry, especially with their forwarder. In order to become a market leader even with their harvester, the company decided to change the harvester to have a swivel and a leveling driver cabin.The aim with this bachelor?s degree thesis was to develop a design concept for the harvester driver cabin, which Gremo AB can apply on the new harvester.

This final thesis aim to create a support that can decrease the uncertainty when planning the cable drum flanges lines that produces cable drums in the interval 100 to 320cm in diameter at Vida Packaging in Hestra. The purpose attains through finding an optimal batch size that minimizes the total storage cost and order prime cost, without degenerate delivery capacity to the customer. Through survey the sale and stock balance development during 2005 and 2006 for cable drums in Hestra and give alternative suggestions how to plan the production after installing a new cable drum flanges line. The study also explores different ways of working during product change in existing nailing line, to minimize the order prime cost. Vida Packaging in Hestra is a part of the Vida group, which is Sweden?s largest privately owned sawmill group with seven sawmills placed all around southern Sweden.

The New National Elevation Model (NNH) is a new high-resolution digital elevation model (DEM) of Sweden from airborne laser scanning. It creates many new opportunities, particularly in the area of flood mapping. NNH is provided by Lantmäteriet in two formats, both in raw LIDAR (Light Detection and Ranging) data and in grid format with two meter resolution. These alternatives have advantages and disadvantages and the aim of this thesis research is to identify these. One of the focuses of the study is data storage and thus data structure analysis, resolution and storage facilities. The research questions are:Why and in what context the different NNH-products from the National Land Survey are used (DEM 2+ or point cloud)?What constraints and opportunities are created by the different options, mainly in terms of different software, resolution, and data storage?The study area is Kärsön in Ekerö municipality located in Stockholms län and has an approximate area of 25 square kilometers. The study is divided into two parts. The first objective is to identify the consequences of using different software to create DEM from pointcloud compared to the DEM2+ model. Height models with a two meter resolution are created in FME and ArcGIS. The models are then compared with the grid from Lantmäteriet, created in TerraScan. The second objective is to examine the impact of the change in resolution, both the storage aspect and both the accuracy aspect. Inverse Distance Weighted (IDW) is an interpolation method which in previous studies proved to have the best results on high resolution LIDAR data. This model was tested and compared with a model from FMEs built-in function and the model from Lantmäteriet wich are based on triangulation (also proved a good method in previous studies). The grid created in TerraScan has good properties such as accuracy.

Preservation of cells and tissues by freezing at temperatures below 70°C has led to new possibilities for the storage of germ cells for fertility preservation. During the freezing process problems might occur, the greatest being ice crystallization which can cause membrane destruction and thus cell death. To minimize this risk, solutions that reduce the freezing point can be added to reduce crystallization and increase survival rates. These solutions are called cryoprotectants. The best method for freezing is still not known.The aim of this study was to analyze the effect of various parameters on the survival rate of human semen frozen with liquid nitrogen.

Nynas produces bitumen at two refineries in Sweden. The bitumen is shipped to seven depots along the swedish coast line, and from the depots special trucks handle the transportation to customers. Recently Nynas has transformed its supply chain and closed down a few depots. At the moment the company is considering a further reduction of the number of depots. In connection to these discussions an analyse of the companys distributionsystem and of possible changes is required.

This thesis is performed as a case study in Västerbotten Museum's textile storage space. The intention with this study is to investigate the relationships between the museum?s tasks: to collect, preserve and make the collections accessible. The aim is to reveal the problems that exist in museums today with increasing collections, less resources for the preservation of the collections and increasing requirements on accessibility. The aim is to deduce the problem by finding out how the different tasks relate to one another today.

The project was carried out in cooperation with the department of product development IOS at IKEA. The work included improvements of a new existing product that Ikea soon will release on the market, Observatör, a wall bracket for flat screens. The product is supposed to fulfil the needs within this market for IKEA. However, since Ikea was not satisfied with it, our work was to carry out the improvements that were specified in the beginning of the project. Another task in the project was to develop a side-product that is supposed to be used together with Obeservatör for storage of DVD/decoders.The project included labour as problem definition to final technical drawings and a prototype.

The current situation for Swedish grain farmers facing a situation with decreasing profitability makes it necessary for the farmers to find ways of increasing the margins in their grain growing. Decreasing profitabilities along with Lantmännens closing of grain elevators contribute to the necessity for farmers to invest in grain storing and drying at the farm. By investing in capacity for drying and storage of grain on the farm it is possible to recieve a higher price on the grain sold due to the possibility to sell when the price is higher compared to the harvesting season. An investment in grain drying and storage with a relatively low investment cost that recently has appeared on the Swedish market is the grain stir drying system. This study contains a comparison of an investment in a grain stir drying system where the grain is dried and stored in the same silo and a conventional drying and storage system.

Vår uppgift på Valeo Engine Cooling AB i Linköping har varit att förbättra produktionssystemet genom att utveckla internlogistiken mellan lagret och monteringsstationerna samt sättet att lagra material.Valeo är en grupp bildad 1980 genom en fusion av bilkomponenttillverkare. Totalt har Valeo 71500 anställda. De verktyg som Valeo rekommenderar för förbättring av internlogistiken är Small Boxes, Flat Storage och Linefeeder. Användandet av dessa verktyg stödjer de principer som finns inom Toyota Production System och Lean Production.Linefeeder är den person som förser monteringsstationerna med material. Han kör omkring med en dragtruck efter vilken han kopplar på olika vagnar.

Abstract PurposeThis thesis aims to focus on how master students administer scholarly articles after they have found them. The purpose of the study is to detect how and to what extent people administer their articles from a personal information management-perspective (PIM).MethodTo answer the research questions, a web-based questionnaire survey was distributed which was announced to around 2,000 master students from different universities in Sweden. Most of the items in the survey focused on individual storage methods. The respondents were asked to rate the frequency of their different information administration behaviors on a seven level Likert-type-scale. Subsequently, items concerning specific information administration behaviors were posed, followed by questions on the respondent's sociodemographic status.