Electronic article surveillance (EAS) is widely used in shops and libraries together with an RF-tag attached to the goods or books in order to prevent shoplifting. By implementing the addition of a moisture sensor to the RF-tag, other functions become possible, including the ability to use as an alarm with regards to frozen goods, which have been shipped but which have melted and have, subsequently, refrozen. In- relation to care for the elderly, one time-consuming step involves checking whether there is the necessity for a change of diaper and this can, instead, be based on an RF-tag with an EAS-system alarm. A preliminary investigation was made using the moisture sensors, which involved how the resistance changes when liquid and/or heat is applied. A simulation of the LCCR circuit (RF-tag with the sensor) was conducted in order to determine how the resonance frequency changes for different resistances levels.

Ecolean Development AB are developing and manufacturing filling machines for pasteurized liquid food products. Because of lack of any appropriate supplier of box closer which seals boxes with small flaps, they have decided to start a project to develop a prototype of a box closer. Due to long experience from industrial automation I have been given a chance to develop control system for a box closer. Degree thesis involves electric design in ELPROCAD ic PRO and programming of PLC (programmable logic controller) and HMI (Human Machine Interface). The report describes degree project from the project plan phase via the development phase to the conclusions.

Organic Light Emitting Displays (OLEDs) are a new type of thin emissive displays predicted to possess superior properties to existing techniques e.g. Liquid Crystal Display (LCD). The main advantages are low power consumption and a thin display structure. This report contains an explanation of the emissive OLED technology, its functionality and the physics of the organic layer structure in an OLED. The technology is described with respect to the two classes of organic materials used in displays, small molecules and conjugated polymers.

The aim of this Master?s thesis was to find out more about the delimiting quality- and shelf-life parameters over time for liquid oat-based products. According to that, to present applicable subjective and objective shelf-life test approaches at accelerated conditions. The study aimed to gain a deeper knowledge concerning the general and accepted way of performing accelerated storage tests. This study focused especially on products, which suffer from quality failure caused by oxidation, such as liquid oat-based products.

SAPA´s resource of waste heat is the basis for this thesis to investigate the possibility of energy assets in their cooling water and possible uses for it. The energy in the waste water is greater than the current need which has three uses which are (1) heating the factory, (2) converting liquid propane to propane gas and (3) local domestic heating. The average energy load that is available is 1, 7 MW and the average temperature in the cooling water is 41°C. The total energy load at dimensioning out side temperature is approximately 1,6 MW for the three current uses. The temperature is currently too low to be used directly in the existing systems so an upgrade is needed.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

Soapnuts have been used as a cleaning detergent and medicine since ancient times in different parts of Asia. Today soapnuts are sold as an environmentally friendly alternative to common washing detergents. The aim of this literary study is to give an answer to what it is in the soapnuts that makes them work as a washing detergent. The active component belongs to a group of components called saponins which are secondary metabolites with the purpose to protect the tree from pathogen attacks. Saponins are widely spread in the vegetable kingdom and some of the families and species are so rich in saponins that their names are influenced by this, for example Sapnindaceae and Sapindus which are mentioned in the beginning of this literary study.

Ovarian stimulation in assisted reproduction often leads to the production of a high number of oocytes. After fertilization of these oocytes, the resulting embryos can be cryopreserved for later use. Vitrification is a recently introduced method for cryostoring embryos, showing high survival rates for both cleavage stage embryos and blastocysts. Characteristic of vitrification are high concentrations of cryoprotectants and ultra fast freezing which makes the material glassily. A major concern with vitrification has been the direct contact of the cryo-solutions with liquid nitrogen.

The Sand Catcher                                                       The thesis project The Sand Catcher investigates the encounter between permanent structures and an ever-changing landscape. The migrating sand dune Råbjerg Mile in northern Denmark is 40 meters high and moves more than 15 meters every year. By introducing a solid structure on the site, the fast movement of the sand dune is emphasised and thereby our view of time and space.Through intuitively building models with varied openings and densities I investigated how architectural elements react with sand. From these experiments a series of spatial features and effects were found, generated from the meeting with the sand.The Sand Catcher is a solid and permanent structure. The sand is the liquid element that generates new spaces, circulations and experiences.

This master thesis was conducted in order to investigate the effects of the browsing species Yeheb on animal tissues in Swedish landrace goats and to make a literature review in order to increase the knowledge of the importance of this plant for livestock production in Somalia. The evergreen Yeheb bush is a very important feeding source for grazing and browsing animals in Somalia during the dry period. Yeheb contains cordeauxiaquinone that stains the bones of the animals red/pink, which has been an increasing problem when exporting meat to foreign countries. In an experiment, two goats were fed dry and fresh leaves from the Yeheb bush for one and two months, respectively. The goats did not feed the intended amount of dry leaves, since the supply and palatability was not as high as estimated.

This master thesis was conducted in order to investigate the effects of the browsing species Yeheb on animal tissues in Swedish landrace goats and to make a literature review in order to increase the knowledge of the importance of this plant for livestock production in Somalia. The evergreen Yeheb bush is a very important feeding source for grazing and browsing animals in Somalia during the dry period. Yeheb contains cordeauxiaquinone that stains the bones of the animals red/pink, which has been an increasing problem when exporting meat to foreign countries. In an experiment, two goats were fed dry and fresh leaves from the Yeheb bush for one and two months, respectively. The goats did not feed the intended amount of dry leaves, since the supply and palatability was not as high as estimated.

The Sand Catcher                                                       The thesis project The Sand Catcher investigates the encounter between permanent structures and an ever-changing landscape. The migrating sand dune Råbjerg Mile in northern Denmark is 40 meters high and moves more than 15 meters every year. By introducing a solid structure on the site, the fast movement of the sand dune is emphasised and thereby our view of time and space.Through intuitively building models with varied openings and densities I investigated how architectural elements react with sand. From these experiments a series of spatial features and effects were found, generated from the meeting with the sand.The Sand Catcher is a solid and permanent structure. The sand is the liquid element that generates new spaces, circulations and experiences.

This master thesis was conducted in order to investigate the effects of the browsing species Yeheb on animal tissues in Swedish landrace goats and to make a literature review in order to increase the knowledge of the importance of this plant for livestock production in Somalia. The evergreen Yeheb bush is a very important feeding source for grazing and browsing animals in Somalia during the dry period. Yeheb contains cordeauxiaquinone that stains the bones of the animals red/pink, which has been an increasing problem when exporting meat to foreign countries. In an experiment, two goats were fed dry and fresh leaves from the Yeheb bush for one and two months, respectively. The goats did not feed the intended amount of dry leaves, since the supply and palatability was not as high as estimated.

Shell companies are characterized by containing liquid assets such as cash, securities or other similar assets. Transactions of shell companies constitutes a severe problem since the purchaser often has the aim of obtaining undue tax advantages by not paying the tax debt of the company.Historically it has been complicated for the legislator to stop the set-up in an efficient way since the transactions as such are not illegal, instead rather commonly used for example to restructure companies or for the transfer of companies to the younger generation. The purpose of the current legislation is to prevent individuals and corporations to involve in shell company trade. Aiming for an efficient legislation, the tax rate is at a very high level.The issue with the rules is that also honest buyers are at risk of being covered. This calls for high demands in complying with the principle of legal certainty and the possibility to forecast the tax consequences.The purpose of the thesis is to identify and analyze eventual problems when applying the legislation.

Researchers at Karlstad University have developed a method for making paper ion conducting. The reasearchers want to test this technique in various applications and produce products that make use of the ion-conducting paper. Hopefully this will drive the development forward and result in new applications for the ion-conducting paper.This study was to test the possibility of manufacturing a gas sensor of conducting paper along with electrodes of conductive polymers printed on the paper. By comparing the paper sensor with an electrochemical cell in which the electrodes of conductive polymer replaces electrodes of metal and ion-conductive paper replaces the liquid electrolyte in the electrochemical cell, it was hoped that it would be possible to measure the oxidation and reduction reactions that a gas could introduce at the electrodes.It was shown that it is possible to measure a potential difference in the range of 0.3 V to 0.5 V between the electrodes when exposing an electrode to 100% oxygen. The reaction that takes place is relatively slow and the reaction rate is partly due to the distance between the electrodes.Since the sensor can measure oxidation and reduction reactions it is possible that, in further development of a sensor, the sensor can be made ??into a versatile sensor with more applications than gas measurement as there are many more ways to oxidize or reduce the electrodes than by exposure to oxygen.During the study there have been discussions and meetings held with various companies in the sensor industry to be able to specify what the market demands of a sensor made ??of paper and the requirements that must be placed on the sensor for it to be interesting for the companies..