This master thesis aims to investigate and quantify the potential associated with increasing the usage of edible by-products as food for human consumption on the Swedish market. The main emphasis is on the Swedish production of offal and the obstacles that currently inhibit greater usage of these products as foods.The results indicate that the Swedish market for offal is limited. Only a small amount of the edible by-products that are produced in Sweden every year are consumed as foods and a considerable amount seem to be downgraded into animal feed or thrown away. The utilization of these products is restricted by economical, technical, legal, and cultural factors that all need to be taken into consideration. On the whole, large-scale slaughter plants seem to be more inclined to utilize these products effectively, as the profit from doing so increases proportionately to the produced volumes.

Södra Skog chose in 2011 to convert the saw mill in Traryd to a gradually refined sawmill of hardwood. In 2009, they had also acquired the hardwood sawmill in Djursdala. This was strategically important for Södra's business since the demand for hardwood products has increased. The standing volume of deciduous trees in Sweden is today approximately 524 million m3sk and it has increased rapidly in recent years. However, the deciduous forests are to a large extent located in areas that are set aside for nature conservation and is thus not available to the industry.The goal of this work is to create a simple and reliable method for mapping of deciduous wood volumes in areas where Södra Skog is operating (Götaland excluding Gotland).The material that is used is raster databases with estimated forest attributes (kNN-Sweden), data from National Forest Inventory (NFI) and forest management plans.

The aim of this study was to provide SCA Forest Norrbotten District with material to assist in their work towards decreasing the frequency of bucking splits in their saw timber logs. SCA Forest supplies the Munksund sawmill with pine timber. Periodically the sawmill experiences problems related to bucking splits in their logs. The purpose of this study was to find an available method to measure the occurrence of splits directly on incoming timber. The ambition was also to gain some knowledge about possible variations between different logging crews in terms of split frequency. If possible, this information could be used to investigate if certain crews produced more splits than others, and thereby making it possible to provide feedback to the logging machine operators. The study consisted of two major parts, a literature review, and a practical sawmill study.

The background to the work bases on the consumers view around Swedish and foreign meat products, and how the attitude around the meat products is pursued in the shops. The consumers request high meat quality and security . Many consumers value local produced and ecological meat products but the price is too high. We have done verbal interviews with consumers on three different shops, where we asked questions and had dialogues around Swedish meat products where the consumers have told us their arguments and opinions about Swedish and foreign meat. The result shows that the majority of consumers consider that it is important to know that meat is produce in Sweden.

Balcony Art is an idea for a new kind of furniture group for those who have limited space on their balcony. This report will discuss conceptual and part of primary construction of the chair and table for use on balconies, how the products developed from an idea to primary, preliminary products.In the conceptual design part, the report will discuss how product requirements and specifications are developed and how these controls the design.In the primary construction, the report will discuss the products journey from sketch to functional CAD models and how the products of individual parts are designed and how the durability calculations affect the design..

Until the 1st of January 2003 there were thirteen processed meat products provided with name protection in Sweden. These products had to contain a certain amount of meat and/or a certain amount of fat to be allowed to carry a recognized name. Among these thirteen products, one could find, for example, meat balls (köttbullar), liver pâté (leverpastej), and Falun sausage (Falukorv). While imports of these products started to increase, the system with name protection lost its ability to guarantee a certain quality for all products sold in Sweden and the legislation was removed on December 31st 2002. At the same time, a common definition of meat was adopted in the European Union.

Sandvik Group is a global engineering corporation within materials technology and produces, among other things, band sawsteel. In order to develop custom relations, custom benefits and the supply chain Sandvik wants to become more acquainted with its customers. Improved feedback means that Sandvik will be able to develop its products in a customized direction. This thesis is a tool for educating and developing sales staff. As a support a calculation tool that can be used as a sales aid has been developed.

Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

The essay aimed to investigate whether people choose light products or original products regarding dairy products and beverages as well as the motives for their respective choice. Finally the purpose was to find out where they had obtained the knowledge to make their choice and how they thought media had affected their choice. The method used was a qualitative decsriptive study with three focus groups consisting of six women aged 40-50, six women aged 20-30 and four men aged 25-35. Each interview lasted 2 hours. The groups were a selection of comfort.   The results showed that all respondents choose original products. The primary reason was because they thought that original products tasted better and had a better consistence.

In this final thesis, an existing method for analysis of chlorophenols (CP) in bottom sediments has been updated and adjusted for analysis of chlorophenols in soil. The covalent bonds between the chlorophenols and the soil matrix were broken through basic hydrolysis and the chlorophenols were then separated from the water phase through addition of sulphuric acid followed by ether extraction. The chromatography was improved through extractive acetylation of the chlorophenols.The updated method was then applied on soil samples from a contaminated area (a former sawmill in Hyttsjö, Östergötland, Sweden).The analyse was preformed by GC/MS with respect to 2-MonoCP, 4-MonoCP, 2,4-DiCP, 2,6-DiCP, 2,4,6-TriCP, 2,3,4,6-TetraCP and pentachlorophenol (PCP).Contamination of chlorophenols in nature can be explained by the former use of wood preservative chemicals based on chlorophenols. In the 1960s and the 1970s these chemicals were used in Sweden, but due to their toxicity they were banned by the Swedish government in 1978.In Hyttsjö a pentachlorophenol-based product named Santobrite was used for several years. The concentration of PCP in the soil samples from Hyttsjö varied from 0.2->1.8 ng/mg dry substance.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO.

This study examines if there are any behavioural differences in-store between consumers who choose a healthy product and consumers who choose a regular product. 540 observations were conducted were different variables were studied. Tthe results indicate that there are some variables that show a significant difference in behaviour at the point of choice between consumer who choose healthy products and those who choose regular products..

This report presents an investment calculation based on an assumed initial investment of a new saw line to an existing sawmill. In order to get as close to reality as possible, we have received data material from northern forest owners who recently made an initial investment in their sawmill in Kåge. In order to calculate and evaluate investments are several different methods, but we, we have chosen to use the discounted cash flow method. The method sums up with the help of a fixed cost of capital together with any future costs and revenues, thereby giving a present value of the investment. We also do a sensitivity analysis to examine how selected factors affect the investment research they change. The study is carried out to a fictitious investment, and therefore the result should not only be studied as a result of the figures. The purpose of this study was that with the help of an investment calculation studying the profitability of a hypothetical investment, and by means of a sensitivity analysis to study the sensitivity of investment to changes. The result demonstrates that the calculations according to the present value method requires a lot of information of the prospective investment.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO. In the developing of fixtures have ideas been discussed with the staff, and instructions were made about how you are suppose to hang up the different products.

The purpose of this thesis is to investigate whether placement, using a special display, of ecological products, will have an effect on consumer buying behaviour and thereby sales of these products. When talking about sales we refer to the amount of ecological products that are being bought, habitual and unplanned, as a response due to the placement of the products in-store. To further elucidate the purpose, the thesis will focus on if the placement of the products itself will have an impact on the customers? attitude towards buying ecological products. A deductive approach was applied where we did a quantitative study using triangulation to receive data to reveal if the placement of ecological products had any effect on the sales of these products.