Företag: Midelfart Sonesson ABSyfte: Studien skulle ge en bild av vilka kriterier som är betydelsefulla för företag vid rationalisering av lagerställen. Den skulle dessutom ge en bild av vilka tänkbara ekonomiska konsekvenser som kan följa efter en rationalisering. Genom en fallstudie av ett typföretag och genom kompletterande intervjuer med kunniga inom logistik och företagsekonomi skulle författarna undersöka vilka kriterier som företagen lägger mest vikt på när de ska starta ett så stort projekt som lagerställesrationalisering, samt förstå vad kostnadsbesparingen kan bli.Metod: En studie av företaget Midelfart Sonesson AB har utförts. Primär- och sekundärdata har samlats in genom personliga intervjuer, litteratur, rapporter, och elektroniska källor.Teori: Teorin består av nio olika avsnitt som kan tillämpas på ämnet i uppsatsen. Teorin används för att förstå företagets uppbyggnad, organisation och dess handlande.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides Savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

Background: Long-term stress can lead to reduced health among nurses which can result in impaired quality of care. Stress in nurses' work needs to be studied in order to prevent stress and impaired quality of care. Aim: The aim of this study was to describe nurses' experience of occupational stress and factors that contribute to occupational stress. Method: The method used was a literature review. Results: The analysis resulted in five themes which describe nurses' experiences of occupational stress and factors that contribute to occupational stress.

The technological legacy from the early electrification of the Swedish railroads has resulted in a power grid with a lower grid frequency than the national power grid from which it is fed. Energy transfer between these power grids with different frequencies requires substations, adapting the grid frequency for the rail road power grid. For this purpose, a feeding power grid has been built, stretching across the country from Boden in the north to Tälle/Häggvik in the south.Power transfer in the Swedish power grid results in voltage angle differences which increase with increasing loads and transfer distance. These voltage angle differences are transferred from the power feeding substations to the rail road power grid, will in some extent cause loss of energy due to unwanted power flows from north to south.To minimize the losses due to this phenomenon, a power management system called EFS 132 kV has been developed and implemented. The system minimizes the unwanted power flows and controls the desired power flow for a good distribution of loads between the power feeding substations.This thesis investigates the extent of the transmission losses avoided due to the EFS 132 kV that coordinates the idling angles to a common reference point.The results indicate that EFS 132 kV affects the power flow, especially between the northern substations through an improved load distribution.

Influenza is a viral infection that affects global health and economy with its endemic and sometimes pandemic spread. Rapid detection of Influenza viruses enables antiviral use and can bring financial Savings. It is also essential for the global surveillance of prevalent Influenza strains. RT-PCR is considered the most specific and sensitive method for detection of Influenza, but Influenza mutates at a high rate and it is therefore crucial that RT-PCR methods are updated regularly.In 2014, Cepheid released their Xpert Flu/RSV XC assay, which can detect Influenza A and B and RSV by multiplex RT-PCR in approximately one hour. The aim of this study was to evaluate this assay at Laboratoriemedicin Västernorrland by using the laboratory?s previous PCR assay for detection of Influenza viruses as reference method.Real-time RT-PCR was used to compare Xpert Flu/RSV XC to the reference method.

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost Savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

In today?s computerized society more and more companies choose to utilize new applications that can ease the way of handling the information. For many of us is imperative that the process as efficient as possible if one takes in consideration the size of Savings that this new application can bring.The developer of the evaluated system is SYSteam AB Huskvarna and they are the ones that gave us this assignment. The application that we evaluate is SCM (Secure Connection Manager). It is already used today by big companies such as Telia and Ericsson to search for errors in telephone servers placed all over the country.

In 2013 a new emission standard for heavy trucks was introduced and hence a number of new parts was brought in to Scania CV AB. This created a need for modifications in the silencers flow. The flow is highly complex involving several suppliers, call off methods and different models of silencers. The aim for this project was to improve the existing silencers flow. The flow, from supplier to assembling, has therefore been mapped.

Background: Long-term stress can lead to reduced health among nurses which can result in impaired quality of care. Stress in nurses' work needs to be studied in order to prevent stress and impaired quality of care. Aim: The aim of this study was to describe nurses' experience of occupational stress and factors that contribute to occupational stress. Method: The method used was a literature review. Results: The analysis resulted in five themes which describe nurses' experiences of occupational stress and factors that contribute to occupational stress.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

During the 90s most companies organized and adopted routines for their environmental work. This work included for example eco-efficiency improvements and the introduction of environmental managing systems. At the UN conference in Rio in 1992 the concept Sustainable development was defined, but it was not until about the year of 2000 that companies in Sweden shifted their work from environmental management to sustainable management. A consequence of this is that they now have to focus on environmental aspect in conjunction with social and economic aspects.The purpose of this study is to gain understanding of what a change of focus to sustainable development means for companies. Has the environmental work suffered in the competition with social/economical aspects under the new sustainable focus? How will the new way of working affect the balance between environmental and social aspects? Changes were studied in five companies by analysing their annual-, environmental- and sustainability reports and through interviews of sustainable managers.

The problems around and the planning of wood flow is some of the most complex issues in the forest-sector. The experience and overview of the single employees is crucial for the possibility of correct tactical and economical decision-making. The increasing demand of Savings and shorter reaction-times with greater flexibility in the wood-supply-chain, makes solutions and aids for improved effectiveness in the work and processes according to wood-flow urgent. Holmen Skog is starting to develop a new forest-road-management-system. The system will facilitate the work according to construction, improvements and updating the standard of roads.

Volvo Construction Equipment is one of the worlds largest manufacturer of heavymachinery. In Braås, Sweden, they develop and manufacture articulated haulers inseveral sizes. The biggest, the A40, is capable of loading almost 40 metric tonnes.These haulers have a bogie to distribute the forces of the load evenly onto the two axlesand there wheels. The bogie is constructed using a rigid balance beam on each side ofthe frame connecting the axles or an independent solution using hydropneumatics.An analysis has been made in order to establish the forces created during corneringand through the theory, an estimation of the extensive tyre wear and extra fuelconsumption has been made. All due to the effects of the tyres not being inline with thecornering radius.

Right now a major generational change is taking place within the banking sector. The new generation entering the labor market is often referred to as generation Y and it consists of individuals born between 1980 and 1995. Previous research has shown that the banking industry as a whole put a widespread emphasis on monetary incentives within the reward system. At the same time several studies highlight that individuals from generation Y are rather motivated by primarily non-monetary incentives.The aim of this dissertation is to explain how various monetary and non-monetary incentives affect the motivation of bank employees from generation Y. A positivistic research philosophy has been used with a deductive approach and a quantitative research method.This study indicates that bank employees from generation Y are motivated by retirement Savings as well as a personal mentor or chief who draws attention to their development.

Bakgrund: Sedan introduktionen i början av 1990-talet har utvecklingen av volymen nyemitterade aktieindexobligationerna totalt sett varit positiv vilket tyder på att produkten blivit en populär sparform hos svenskar. Detta tillsammans med det faktum att det finns få studier gjorda kring aktieindexobligationer som sparform där ett större perspektiv tas i beaktande gör ämnet intressant att studera.Syfte: Uppsatsens syfte är att kartlägga och analysera för vilka privata investerare aktieindexobligationer passar som sparform ur ett livscykelperspektiv med utgångspunkt i (i) bransch- och rådgivningspraxis, (ii) finansiell riskhanteringsteori med fokus på portföljvalsteori och (iii) historisk data avseende risk och avkastning.Genomförande: Studien har genomförts med hjälp av att intervjua privatrådgivare, kapitalrådgivare och personer som arbetar med strukturerade produkter på storbanker och hos mindre finansiella aktörer. Fem stereotyper har använts som diskussionsunderlag vid intervjuerna. För att kunna föra en djupare analys kring produkten som sparform för privata investerare har en portföljoptimering genomförts för att ta historisk data gällande risk och avkastning i beaktande.Slutsats: Studien fastställer att produkten passar privata investerare som befinner sig i den senare delen av konsolideringsfasen och inte är de mest riskbenägna. Studien visar att det främst är kredit- och marknadsrisken som är kopplade till aktieindexobligationer samtidigt som risken i produkten bedöms som låg.