Ground work like blasting, piling and excavation has always had a great influence during the planning phase of a construction project since it can cause damages on adjacent buildings and have severe economic consequences. This thesis deals with how vibrations caused by ground work influence near-by buildings and what methods geotechnicians and construction entrepreneurs use to handle these risks.The purpose of this thesis is to explain risk management in relation to ground work. In order to achieve this I have used a qualitative method by interviewing a geotechnician and a ground work contractor who possess knowledge and experience useful to this thesis. The result shows that vibrations from ground work spread through the ground as seismic waves that cause displacements and packing in the ground visible in adjacent buildings as cracks and subsidence damages. Geotechnicians study ground work vibrations by means of ground investigations and experience from previous projects in order to produce a risk analysis that entrepreneurs can use to reduce damages.

This report is focusing upon relining from a client?s point of view. Potential buyers are given a presentation of the different methods available today together with a general briefing describing the process. An important part of this report are the interviews that took place with already established customers. Property owners, managers, pipe cleaners, and project managers whom all been in contact with relining have answered the questions given along with their own thoughts and have also given recommendations of other persons to talk to.

Compressed air is a low efficiency media, and is thus very expensive to produce. This thesis work began by mind mapping how to create savings on the compressed air system at Billerud Skärblacka AB. Certain issues have been chosen for further studies.In order to identify the consumption of compressed air at PM 8 and 9, several measurements were made. At PM 8 there were not found any pressure drop, only large pressure variations for short periods of time. The causes of these pressure variations were not established.

Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

This qualitative study examines the participation that older people have in their own home care by exploring experiences of care workers. We will investigate to see if there are limitations due to financial implications in the sector. Modern day care of the elderly in Sweden is facing increasing pressures to both show cost savings whilst maintaining the same levels of service within the community. It is becoming more essential for older people to participate in their own care for the sake of their health and well-being. The method that we used for data collection was qualitative interviews.

The general pension supplement introduced in 1960 which introduced the public pension funds in Sweden. In the late 1990s the Swedish pension system was reformed and established the current structure. Today, funds are one of the most common forms of savings in Sweden and mutual funds are the most common type.The purpose of this study is to analyze the risk-adjusted returns for the AP funds in the period 2003-2009. Study was based on five funds that are most similar and have the same mission. These funds are AP1, AP2, AP3, AP4 and AP7.The method used in this study is mainly based on a survey of the figures and measurable units of statistical methods that have been carried out by a quantitative approach.

Denna uppsats syfte är att undersöka och förklara hur brand extension produkter kan påverka ett företags image. Vi har valt att undersöka Jaguars, Porsches och Ferraris brand extension produkter då dessa avviker mycket från deras core product. Uppsatsen besvarar även hur konsumenterna uppfattar dessa brand extension produkter och företagens bakomliggande motiv till dem. Vi har under uppsatsskrivandet gång pendlat mellan teori och empiri. Vår empiri består av kvalitativa undersökningar.

This report describes the results of the project "Concept development of jet engine inspection plugs" carried out in the spring of 2008. The work was done at the department of product definition at the company Volvo Aero in Trollhättan. The objective of the work was to develop concepts for a "Volvo-unique" inspection plug. The work is part of Volvo Aero's focus on proprietary (self-developed) technologies. Inspection plugs can be found on virtually all aircraft engines and gas turbines.

This thesis aims to study brand change, which can be of interest since a brand during its lifetime can be expected to meet a lifecycle consisting of five phases; innovation, introduction, growth, maturity and recession. In order to avoid the recession phase and the sales decline that follows there is a need for a change of the brand.In order to study brand change, theoretical framework is compared to two real world cases that have gone through an active change.The conceptions of positioning, repositioning and revitalization are clarified. Positioning deals with how brands are located in customer?s minds as well as on the real market. Repositioning implies a change of the current position and is also often a move towards a new market segment.

Self-driving cars are soon to become a reality to the commercial market. A self-driving car does not have a human operator, which enables some interesting characteristics. The main benefits are considered to be:The number of accidents and traffic jams should be reduced.Enhanced comfort.Energy usage could be decreased while capacity could be increased.This study concerns the causes for improved energy efficiency. The reason for improved energy efficiency is mainly because of the variation in terms of acceleration, braking and distance holding are reduced. The vehicles are more intelligent and can work together as a unity.

During the last year there has been a globalization of trade. Because of the development ofmore sophisticated information's - and communication technology the boundaries and thephysical distance have been smeared out between company as well as countries. Furthermoreit generates that many companies have restructured to global value chains. Because of theincreased access the marketplace has become harder and more competitive than ever.Since the customers nowadays have more access to product information the consume patternsand behaviour has been changed. Through the increased knowledge the consumers requiresmore of the products.

The purpose of the study was to investigate the use and losses of energy in an existing older building. Another purpose was also to look through various options for heating systems with renewable energy in the building. The aim was to reduce the use and losses of energy. The first step was to study the related electricity bills of the building and also perform measurements and calculations of the building envelope and ventilation. The next step was to find out the possible actions for energy saving by performing measurements and calculations.

One of the most distinguishing features for companies today is that they must have a close collaboration and keep up a good relationship with their suppliers. This is important for the companies chance of survival and for them to compete in their markets. This essay will discuss the subject of Scania?s long-term collaboration with their suppliers. The purpose of the essay in this case study is to analyze if a long-term cooperation with a supplier is of essence upon renegotiations of continued collaboration.

The background to this paper is the fact that many products are demonstrated to show the consumer value of the product. This is generally the fact when it comes to agricultural products, such as tractors. The growing number of models makes this even more import for the retailer to perform a demonstration that really catches the interest of a prospect customer. One problem is that these demonstrations are expensive and many small retailers have difficulties to afford demonstrations of every model. Together with Åhmans Traktorcentrum AB a market investigation was conducted. The company has its primary sales area in the region of Östergötland and north part of Småland. Åhmans Traktorcentrum AB is a John Deere dealer.

Processen vid framtagandet av en ny produkt kallas New product development (NPD). Denna process innehåller 6 steg som ska hjälpa företaget vid utvecklingen av en ny produkt. Det andra steget i denna process är konceptutveckling. Utvecklingen av ett koncept är en lång process som innehåller 7 steg som ska hjälpa företaget utveckla koncept till olika produkter. Processen sträcker sig från upptäckt av marknadsmöjlighet till projektplanering.