The report is a master thesis about energy efficient measures for an underground facility Hemsö fortress.Several proposals are evaluated economically.Statistics of the electricity used and measurements of several heat pumps are analyzed to find energysavings potentials.The results indicate that several units of a dehumidification system are responsible for over 70 % of theyearly electricity cost. The air that is being dehumidified by these units can otherwise cause damage ofculturally important interior designs.The proposal with highest profit suggests an alternative method for dehumidification. The cooler in theair handling units in Hemsö fortress have capacity to dehumidify the air. However complementary fansneed to be installed to circulate humid air towards the air handling units. The solution can be implementedin three different locations within the facility.

Term: Spring term 2007Study objects: Reitan Servicehandel AB, Vi-butikerna, ICA Sverige ABPurpose: The purpose of this study is to analyse how procurement is used as a strategy to achieve better competitive strength, within the retail food industry.Theoretical: The theoretical chapter illustrates different procurement organisations, multiple and single sourcing, brand equity, consumer behaviour and involvement, Efficient Consumer Response including supply chain and category management and finally Demand Chain Management.Method: For the case studies, three food retail companies have been interviewed: Reitan Servicehandel AB, Vi-butikerna and ICA AB. To illustrate how consumer behaviour influences retail food market, several secondary consumer research studies have been analysed.Conclusions: The results indicate that the procurement organisation can achieve a better competitive strength by a centralised organisation, which make it possible to improve conditions of terms when ordering higher purchase volumes. The sourcing strategies can improve a company?s power within the supply chain. All companies within the study had a very good knowledge about consumer behaviour.

AimThe Swedish government has allocated a milliard Swedish Crowns on the project ?Ett handslag med idrotten?, (A handshake with sports), to make it possible for more children to participate in sports. The project goes on for four years and my work is an evaluation of the projects that have received fundings from Gästriklans Idrottsförbund for the second year. One aim is to see how many pupils that have been involved with the projects and especially the numbers of pupils earlier not active in a sport club and the number of girls. It is interesting to see what?s in common in the sport clubs that have had a large number from those two groups.

This master thesis consists of an investigation of the profitability per hectare in privatly owned forest land. The investigation is based on data collected from Skogsstyrelesen, Riksskogstaxeringen and Skogsforsk. During the last twenty years the prices on pulp wood and saw log have substantial decreased, but during the same time the the volumes from final felling have increased and the cost for felling has decreased, this investigation shows how the netprofit per hectARE after final felling has changed between year 1980-2005 This investigation shows that that the netprofit has stayed on a stable level during the years 1985-2005 even though prices pulp wood and saw log decreased. Much indicates that the demand of swedish pulp wood and saw log will continue to be strong or even stronger wich will give increased prices and an higher netprofit after final felling in the future.

The purpose of this developmental research was to test the new way of working when the students were to take part in planning of cooking during the lessons in home and consumer studies, because the aim of the school is to teach the students to take the responsibility for their studies. The two first lessons should be used by students in the group to plan and organize their meal. During the third lesson the students must be responsible for cooking ready their meal and afterwards they must evaluate the results. The results of this new way of working was new for the students and they thought it was fun to be responsible for cooking during these lessons in home economics. The students in the groups were of wixed ability and they developed their knowledge from the levels of their ability.

The purpose of this study has been to analyze the relationship between commercial brands and a subculture, with a focus on a number of elements of success. These elements could be in the nature of sale stats as well as that of influence within the subculture. All of this within the context of the snowboard culture. In accossiation to this we have formulated a question of study:What marks brands which gains influence within a subculture in addittion to becoming an important factor in the self-expression process of the cultural members?In this study, we have practised a qualitative method based on six (6) independant interviews with participants, active within the snowboard culture as well as one outside marketing executive and one ethnological reseracher.

Abstract: The world in which companies are acting today offers challenges in the sense that it is rapidly changing and that a vast amount of information is available. In order to ensure the competitiveness and survival of the company, an effective and efficient environmental scanning is essential to the company. Our aim with this Master's thesis is to investigate what factors constitutes important and basic conditions in a well functioning environmental scanning and how companies strategically can go about to achieve this. In order to highlight and specify how these factors can be applied on a specific company Thule has been our focal point. Thule.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

To get the maximal output of your exercise in gym machines, there are different factorsto be considered. For example the strength of the muscle varies dependent on the positionof the muscles. To get the best results of the exercise the load has to reduce and increaseat specific positions.This study was made in cooperation with Caretaker Scandinavia AB, a company forsales, marketing and development in health care. They are general agent for Nordic Gymwho works with manufacturing of equipment and machines for gym and fitness.The aim of this study was to generate a method of measurement to evaluate and controlthe biomechanics of Nordic Gym´s workout equipment. A protocol for an ergonomicanalysis on the equipment has also been elaborated.One of the methods to measure the biomechanics was to measure the torque through thewhole movement.

In this thesis you will be able tofollow the design work of a drumtest. A tool that by having a rotatingdrum with equally positioned obstacleswill simulate the conditions a mountainbike rim will pass through.Initially there is a specification ofsome parameters and requirements thatthe design had to fulfill. There is alsosome brief background information aboutwhy a drum test is required for abicycle rim manufacturers and about thecompany Innolite Design AB that thisthesis is done for. After that itfollows an extract from conceptgeneration with the chosen concepts andsolutions but also some of the conceptsthat were not chosen.The thesis also contain a part where thereader cangain a deeper understanding of how thedesign works as well as some moredetailed facts about how the choice ofmaterials, their thicknesses, etc. havebeen made.

An organization must manage its resource consumption and material flows in order to satisfy the demand of its products as efficiently as possible. Managing of the aforementioned requires a balance between the organizations resources (such as the capability of distribution and production) and the market demand. According to Gardner (1990), an estimation of future demand is a necessity for maintaining the balance. An instrument that is used frequently to estimate future demand is demand forecasting. The demand forecasting practice has been thoroughly studied and a plethora of academic contributions exist on the topic.

The energy consumption continues to increase as the use of electronics and energy consuming equipment increases. The use of fossil fuels has to be phased out for this to be sustainable in the long run while the use of renewable energy continues to increase. A renewable energy source is solar energy but the production of heat and electricity are today very expensive compared to other energy sources and an important task for the solar energy market to grow is therefore to minimize the production cost of the solar collectors while increasing its efficiency to produce heat and/or electricity. One way to convert solar energy into heat is by using solar collectors and electricity can be produced by utilizing the produced heat, or by applying solar cells.This thesis aims to recommend a reflective material for the next generation solar collectors from Absolicon and to recommend a commercially available coating for the receiver tube of the solar collector. A market study has been carried out to investigate the cost-related aspects along with the optical and durable aspects for the optical material of the solar collector.

In this degree project we wanted to investigate if there are any possibilities to get a higher income from grain growing by giving the grain to hens instead of selling it. We were also wondering if the manure has any value or if it only cost the egg producer money. If the egg producer cultivate his own grain and is able to store it in layer is there quite much money to earn. Expensive pasture makes it profitability to pay up to 1,35 Swedish crowns for a kilo of wheat. In our calculating we?ve used calculation from the company Lantmännen.

The purpose of this thesis is to investigate the possibility to make small, cheap and ultra low power sensor platforms, connected in wireless networks for monitoring of home and industrial environments. The concept is based on ideas from our supervisor, Jerry Lindblom. The developed system consists of a generic platform for different sensors, a receiver and software. A GPRS module from RO Rollytech AB and a database from Gema Industri AB have been modified and used to demonstrate an example of a complete system. To the platform, it is possible to connect any resistive sensor and any sensor that can act as a switch.

Because society?s demand for quality, efficiency at low cost is constantly increasing, companies are increasingly choosing to invest new methods to achieve these points. Those who manage to find ways to improve their processes are often the companies that have the greatest chance of becoming a winning player in the market. BIM is a new method that can reduce the internal costs while increasing communications between different parties. However there is disagreement about what BIM is and its purpose.