Syftet med studien är att bidra till ökad förståelse av och fördjupad kunskap om taluppfattningens och skriftliga räknemetoders betydelse för hinder i elevers matematikutveckling, särskilt avseende addition och subtraktion, samt undersöka hur lärare arbetar med dessa områden för att förebygga och möta hinder för matematikutveckling.Elevers matematikkunskaper sjunker och på senare år har brister i taluppfattning uppmärksammats som en möjlig orsak. Denna studie med kvalitativ ansats har intervjuer och skriftliga dokument som datainsamlingsmetod. Hur uppfattar nio lärare som undervisar i år 1-6 nödvändiga kunskaper i taluppfattning för att hantera skriftliga räknemetoder i addition och subtraktion och vilka förklaringar till brister lyfter de. Vilka verktyg används för att få kännedom om elevers kunskaper i matematik vad gäller taluppfattning och skriftliga räknemetoder?Av resultatet av studien framkommer att det finns variationer i uppfattningar om nödvändiga kunskaper och undervisning om taluppfattning och skriftliga räknemetoder.

Can you ensure that your smoke detector will sense fire and sound the alarm in the middle of the night?In 80 percent of the cases where emergency pulls out, smoke detectors are missing where the fire occurred. In the year of 2009, 118 people in Sweden died in fires ? most of them would have survived if there had been a functioning smoke detector.Earlier development of smoke detectors has mainly been focusing on components that sense smoke and alert in case of fire. But in most cases the problem has not been whether the smoke detector was working or not as fully assembled, but rather that it was missing.

My project is about attitudes towards disabled people, about our fear for those who are different, about acceptance, ideals and normality.My inspiration has been prosthesis, and mostly people that are born without limbs. Through my research I have come across a lot of questions. Such as, why is a prosthesis so important and for whom? Why is it so important to be normal? What is normal and for who? People that are born different se upon themselves as normal, until they realize that others don?t. Many of them want to learn how to deal with life without prosthesis. And therefore they reject these. Sometimes the prosthesis is aids that are highly necessary.

This paper analyses how Swedish fine-art oil paintings sold at auctions has performed as a monetary investment during the period autumn 1985 until spring 2006. An average price technique as well as a hedonic regression technique, applied to a sample of 19 213 auction sales, is used to construct price indices. The indices show somewhat different results, which is explained by the inability of the average price model to adjust for relative differences in quality between periods. The hedonic regression model on the other hand captures this effect, why the hedonic index is applied in a financial return model. By adjusting for transaction cost, the financial return of an average investment in paintings is calculated.

This master thesis work was done by two students at Machine Design at KTH for Lesjöfors Stockholmsfjäder AB. The task was to develop a calculation program for gas springs. The program is going to ease the selection of gas springs for a given case of a lid that should be opened. The program is going to be used internal by sales people at Lesjöfors AB in Sweden and internationally. The program is therefore written in English.The program was developed in Microsoft Visual C# 2008 Express Edition.

Sweden is dependent on secure sea transport. Shorter disruption of imports of fuel and crude oil can be managed with an emergency stock, but a prolonged halt in imports creates problems. For industry, the vulnerability is greater. Fragmented production chains in combination with expenditure reductions in inventory causes a dependency on proper transport of intermediate goods in the manufacturing industry. A lengthy disruption thus involves disruption of production for both domestic consumption and for export goods containing imported parts.In order to secure shipping routes with a limited number of vessels, Mine Counter Measures (MCM) capacity is required, and according to the Armed Forces, developed with new sensors and autonomous vehicles.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

The residential and service sector in Sweden accounts for approximately 38% of the total energy usage and Sweden has an aim to reduce the total energy use by 20% by 2020 compared to 2008, which means residential sector will have to improve energy efficiency. As part of that a law was instituted by the Swedish parliament that all properties must have an Energy Performance Certificate (EPC) to thereby give the property owners a greater insight into energy use in their buildings and propose recommendations for energy-efficiency measures. On the EPC, a value on the building's energy performance in terms of energy use in kWh / m2 per year is declared, of which electricity is a share of it. Instructions on what to include in the amount facility electricity for running the facilities is regulated by the authority for building, Boverket while SVEBY has made an interpretation of the regulations in their report "Brukarindata bostäder" where they have a table on what should be included in the amount and what not to include.This report is a study of two similar apartment buildings, where one of the buildings recently underwent renovation, to see if the declared amount of energy for electricity, in the EPC, is consistent with the measured value, and whether there has been any reduction in facility electricity in the renovated building after the renovation.The result shows that the measured value of the building electricity was 2.6 kWh / m2 per year, 28,8 %, lower than the declared value in the building that have not undergone a renovation. Calculation of values from previous years (2011) by the same percentage of facility electricity as in the results of the measurements, 56.7%, it becomes clear that the declared value for facility electricity in the EPC of the renovated building do not correspond with reality and that there has been an increase in use of facility electricity after the renovation..

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

The study was conducted with an landscape approach with an subject related approach in the field of environmental psychology to investigate how road design affects drivers' choice of speed. The purpose was to portray road environments on thoroughfares in urban areas to motivate motorists to keep the speed limit and thus increase road safety for vulnerable road users. The task question was formulated, how can thoroughfares in suburban settings be portrayed to motivate motorists to reduce speed? The study was conducted throughout a literature review of motivational speed measures along with interviews with road design experts at the Swedish Transport Administration. Case studies were conducted on three thoroughfares in the Stockholm suburbs Vallentuna, Upplands Väsby and Danderyd.

This study investigates whether the permanent measurement bias (PMB) has changed over time for Swedish companies listed on the Stockholm Stock exchange at least one year during 1996-2000 or 2005-2010. By using the Residual Income Valuation-model the markets' implicit value on PMB is generated through reversed engineering, as values for all variables except PMB are entered such as the market perceived them at the specific valuation date each year. This implicit value is classified into industries and then sorted by their median. Statistical tests are performed to see if there is a difference between the industry median and the accounting-based values on PMB. The difference from period one to period two is also statistically tested for.The study finds that the implicit values on PMB have changed somewhat between the periods; however the fluctuations are not statistically significant.

With a shifting world market and periodically profitability issues, Swedish farmers seekalternative ways to enhance their profitability. One interesting alternative to get a highervalue and enhance products is biodiesel, a way to improve the profitability on a farmscale.The diesel that is produced and sold, already have a mixture of 5% biodiesel, andthere is a possibility to add more biodiesel to it. By developing new engines severalengine-manufacturers now allow a mixture up to 100% biodiesel in their engines. Hencethere is a market for an increased production of biodiesel. The aim of this study were toinvestigate the possibilities and the problems related to farm-scale production ofbiodiesel, and to study the profit margin in the production.

The E-department at GETRAG All Wheel Drive in Köping have problems with the efficiency on parts of their production equipment. The equipment with the most significant efficiency problems are four automated multifunctional production cells that produces housing for rear drive units. The major part of the problem is the large amount of small stops that causes the low efficiency.The department already worked with logging of interruptions and efficiency calculations before this project started. However this work was not done to the extent considered necessary for a systematic follow-up of the interruptions.The aim of this paper is to point out a more effective and systematic way to work with logging of interruptions and the follow-up. In addition the equipment were studied with a method for efficiency calculation that ? if used properly- is a more powerful and a visually better method than the one used by the company today.As the initial current state analysis of the equipment was made a lack of documented knowledge about the equipment was discovered.

Detta examensarbete har genomförts i samarbete med byggteknikavdelning på Ramböll Sverige AB, i Norrköping/Linköping. På företaget finns ett behov av att förenkla arbetet med vindlastberäkningar för hallbyggnader enligt Eurokoden. Idag använder företaget en förenklad metod som överdimensionerar. För att kunna göra en mer exakt beräkning helt enligt Eurokoden och effektivisera arbetet har det i detta examensarbete skapats en beräkningsmall för detta ändamål. Beräkningsmallen har tagits fram i programmet Microsoft Excel.För att också kunna se konsekvenserna av att jobba med en förenklad metod, har det utförts en jämförelsestudie mellan två befintliga projekt på företaget.

User-centred acquisitions at three academic librariesA new way of developing collections has been adopted at a number of small academic libraries, user-centred acquisitions. The method implies that the main way of building the collection is by means of receiving suggestions of titles from library users. The main purpose of this thesis is to investigate changes in acquisitions of monographs. At a more detailed level it seeks a deeper understanding of what user-centred acquisitions is and how the method effects the acquisitions process. Changes in stock management and the reason why the libraries have chosen the method is investigated as well.