Uppsatsen är ett examensarbete på 22,5 hp, som kom till på uppdrag av SONO inredningar och Tranås skolmöbler och har utförts av Sara Storm, student på Produktdesignprogrammet vid Malmö högskola, under våren 2012. Arbetet behandlar klassrummens ljudmiljö i låg- och mellanstadieskolor samt hur elever sitter i sina stolar. Kan en elevstol bidra till en bättre ljudmiljö i klassrum och erbjuda en bra ergonomisk sittkomfort för eleven? Resultatet blev en stol, där material och konstruktionslösningar reducerar buller och med sin vippfunktion möjliggör ett flexibelt sittande..

The aim of this study was to determine the basic movements of the riders? pelvis and upper body when riding in trot seated. The study was preformed at a treadmill with seven high level dressage horses and their riders. The movements of the horse and rider were captured with a motion analysis system (ProReflex®) and also recorded on video. The horses were ridden in collected trot, 3.0 m/s.

The purpose of my report is to create an interest in hand caning and different caning patterns, both for professionals and interested laymen. My hope is that they will use my report as a guide and an inspiration, for techniques such as braiding a cane seat. I also discuss how better to preserve cane furniture and different ways in which to finish it. Weaving is easier than you might believe.Today many people discard old and inherited furniture with elements of hand caning because it is too costly to have it repaired by a professional. Some people also remove the cane work and replace it with upholstery and fabric.

Jag har som examensarbete på master-nivå formgivit en sittmöbel med utgångspunkt från min uppväxt i Dalarna. Målet har varit att göra en filosofisk tolkning av mina minnen samt en hyllning till regionen, i synnerhet Borlänge där jag växt upp.Jag har under projektets gång gjort en resa både på ett mentalt och rent fysiskt plan tillbaka till den plats jag växt upp för att utforska mina minnen och därigenom skapa en plattform för mitt designarbete.För att nå mitt resultat har jag använt mig av designmetoder som ITK, intervjuer, skisser, studiebesök, materialtester, mockups samt modelleringsverktyget Rhino.Resultatet är en stol inspirerad av saker som bland annat Ornäs stugan och musikkulturen i Borlänge. Stolen består av en metallkonstruktion, trädetaljer vid fötterna samt armstöden och en sits i läder.For my thesis work on postgraduate level, I have designed a chair based on my upbringing in Dalarna. The goal has been to make a philosophical interpretation of my memories and a tribute to the region, particularly Borlänge where I grew up.During the project I have made a trip both on a mental and physical level back to the place where I grew up to discover my memories and thereby creating a platform for my design work.In order to achieve my result, I have used design methods such as ITK, interviews, sketches, field trips, materials testing, mockups and the modeling tool Rhino.The result is a chair inspired by things like Ornässtugan and the music culture in Borlänge. The chair consists of a metal construction, wooden feet and armrests and a seat made from leather..

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

This report summarizes a Bachelor Degree Project in Integrated Product Development, carried out during the fall 2007 till spring 2008 by three students at the Product Design Engineering Program at the University of Skövde. The project was performed in cooperation with Lundbergs Möbler AB in Tibro. Lundbergs wants to start selling furniture to the public eldercare. The purpose of this project was to adjust one of their chairs. The project layout was to first make a preliminary investigation where the market, competitors? assortment and the purchasing process are studied.

Dressage schooling is not a subject that rests on science, it is a matter of dependable experience. So far there hasn?t been so much research about it, but more and more is done. Especially the interaction between rider and horse is a nearly uninvestigated field. Riding skills is much about having the right position, and having the horses head and neck in different positions, but there are no research done that support or deny that this old ?knowledge? is for the best for the horse. This study was performed to evaluate if the head and neck position of the horse, and the velocity, has any influence on the position of the rider.

When living in a small apartment one of the greatest challenges is to make to most out of the available space. Several different furniture are used for different purposes.Another issues arise when having peopleover, which requires additional space andseats. On this basis, the project builds oncreating a flexible combination furniture withmultiplepurposes.Thegoalistomakeapieceoffurniturethatfillsacertainneedwhilenotcreatingjustanotherfurnitureusedforasinglepurpose.Theambitionisfurthertomakechairs,shelvesandsideboardstospeakthesamedesignlanguageandworkwelltogether.Furthermore,thisprojectaimstounderstandandlearnhowadesignprocesscanbecarriedoutfromthoroughandmethodicalresearchtothefinishedproduct.Theprojectalsoinvolvedexploringchangeabilityandunderstandingwhatthiscoulddowithapieceoffurniture.Theresultisapieceoffurniturethatisprimarilyusedasabookcasebutcanbeeasilyrearrangedintoaseatingareaifneeded.Themodelhasbeenrealizedthroughaphysicalprototypewhichreadinessisclosetothefinaldesign..

Back problems are well noticed in horses, especially in horses used for riding. Kissing spines (impingement of the dorsal spinous processes) are often found at radiographic examinations of the thoracic spine. Kissing spines is a radiological diagnosis, indicating that parts of at least two adjacent dorsal spinous processes are in contact with each other. It is not uncommon that horses without clinical signs of back problems have some degree of kissing spines. It is therefore not sufficient with a radiographic examination to say that the cause of pain is kissing spines.

Playsam in Kalmar AB are world famous for their design of the toys they sell. Together with their CEO Carl Zedig the goal was to find a new product for the company.  The process has far from been linear, I started off in one direction, got rejected, turned another way and we finally decided to create a rocking horse in a De Stijl style. At the same time taking consideration of the demands from Playsam and myself.Playsam?s products are archetypes of ordinary objects around us such as the car or the aeroplane. The company mainly produces its toys in wood and the stylized shape together with the blank painted surface has become a hallmark for them.De Stijl, the Dutch art movement containing artists, designers and architects such as Piet Mondrian, Theo van Doesburg and Gerrit Rietveld.

According to ?Fotförbundet" (2012), Overpronation occurs frequently (80 %) in the Western World and furthermore overpronation of calcaneus influences the position of the pelvic and thorax (Fotförbundet, 2012; Behnke, 2008). The aim of this study is to investigate whether or not it is possible to connect overpronation of calcaneus to the problem in the rider?s seat as observed by the instructors of Strömsholm. The study will also investigate if the riders seat problems as noticed by the riding instructors are comparable with the problems found by the analyst during testing. One purpose with the study is to raise the instructors and riders awareness that anatomical deviations in the rider might influence the rider?s position in the saddle. The questions of the study are: - Is it possible to see seat problems in riders with overpronation of calcaneus? - If it is possible to see more seat problems in riders with overpronation of calcaneus, do the instructors in the study considers the seat problems be similar with each other? - If there are seat problems in the study, is it the same according to the instructors and the analyst in human biomechanics? The hypothesis of the study is that overpronation of calcaneus has an effect of the rider?s position in the saddle. The study is conducted as a blind study where the test subjects have been filmed (from knees down) as they walked barefooted and later while riding.

The purpose of the project was to design a furniture collection that can be packed in flatpackages and be assambled by the buyer. The idea is that the assembling will give the furniturean added value. I have tried to create a collection that is easy to produce so that the productwill be cheap for the consumer.The collections aestethic is inspired by Gothenburgs harbour The wide and bearing elementsof the furniture has set much of its expression.Joints has been highlighted details instead of being hidden..

Introduktion: Artros är en av de vanligaste anledningarna till funktionsnedsättning hos äldre varav knäartros är en av dem. Prevalensen ökar med åldern, dock kan man även drabbas i medelåldern. Risken att drabbas i medelåldern ökar med predisponerande faktorer som ärftlighet, övervikt, muskelsvaghet och ledskada. Grundbehandlingen idag är träning, information och viktreduktion. Endast en bråkdel av alla artrospatienter träffar en sjukgymnast innan operation.

I have always been told that form follows function. But does it have to be that way? I decided to see it  from another angle.Kinesics is a term form non verbal komunication. In my thesis project I have been working with body language in furniture.  I believe that furniture, just like us, has an expression and a character. We often tend to desccribe furniture with the same words as we describe people, for example: "A relaxed chair" or "a cocky table".

I have always been told that form follows function. But does it have to be that way? I decided to see it  from another angle.Kinesics is a term form non verbal komunication. In my thesis project I have been working with body language in furniture.  I believe that furniture, just like us, has an expression and a character. We often tend to desccribe furniture with the same words as we describe people, for example: "A relaxed chair" or "a cocky table".