This report is the result of a project work carried out at Karlstad University in conjunctionwith the local consulting firm Camatec where most of the work has been performed.The work can be classified as a classic engineering work with supportive theories andcalculations which in this context is relevant.The engineering project has focused on developing new standards for a conveyor that is usedin the Värmland paper industry where large rolls of paper are produced. A conveyor can takeits appearance in many different forms but in this thesis it has been an exemplary look and ithas also become modulatable with a central section, a drive end and a turning end.The construction work has been build under CAD programs such as Pro Engineer, drawingshave been created and costings have been analyzed. Strength calculations have been made andcooperation from several different companies have erected to explore different solutions andideas for a modern and sustainable conveyor..

AbstractTitle: Corporate Social Responsibility within the banking-sector ? A case study of the CSR-strategies of Nordea.Seminar date: 130108State University: Mälardalen University ? Västerås Institution: School of Sustainable Development of Society and TechnologyLevel: Bachelor Thesis in Business Administration ? FÖA300Authors: Samir Ghaddab, Josefine Jonsson, Sam LindforsExaminor: Cecilia Lindh Thillenius Supervisor: Magnus LinderströmPages: 35 Attachments: 1 Key words: CSR, bank, sustainability, communication, awarenessResearch questions:- What is the nature of CSR-related work in Nordea, and how do they practice CSR? - How can Nordea raise awareness about CSR among employees and other stakeholders?Purpose: The purpose with this thesis was to get an increased understanding about how Nordea interprets CSR and how they work with CSR. Finally with relevant theories in mind, this thesis presents suggestions on possible changes and opportunities within Nordea?s CSR-activities and how they can co-operate with NGO?s like CSR Sweden.Methodology: A qualitative study with deductive methods. A case study has been done with semi-structured interviews at a company and a nonprofit organization.Conclusion: The reality in which Nordea operates conforms to the theories presented in the thesis when we look at the driving forces behind working with CSR and the demands on the company that stakeholders have.

AbstractTitle: What TV-glasses do you wear? A study in how party-political people decode the TVshow Scooby Doo (Vilka tv-glasögon har du? En studie i hur partipolitiskt aktiva personer tolkar tv-serien Scooby Doo)Number of pages: 47 (54 including enclosures)Author: Christopher LandstedtTutor: Amelie HössjerCourse: Media and Communication Studies CPeriod: Autumn term 2007University: Division of Media and Communication, Department of Information Science, Uppsala University.Purpose/Aim: The aim of this essay is to make a study in how party-political people, 18-25 years old, both female and male, decode the messages in the TV-show Scooby Doo from 1969. Do they decode the show differently because of their political view, their gender or, and their social background? Is there a pattern in the decoding or is it based on a more individual level?Material/Method: A qualitative method containing a total number of 16 individual interviews with young adults, 18-25 years old, half of them female, the other half male, were used. All of the participants are members of political youth parties/organizations, equally divided in left and right wing parties.

This degree project is on 15 university points which correspond to 10 weeks full time studies. The work has been carried out during autumn term 2007 and spring term 2008. This degree project has been carried out with the cooperation of Etac Supply Center AB who is located in Anderstorp.It?s been Etac interest to develop a solution which helps the user of the wheelchair over obstacles. My task has been to develop a concept that solves the problem according to the requirement specification.In the rapport the reader can follow the development from an idea to a finished concept.

Sahlgrenska Academy at University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: Coconut water as a rehydration fluid. - Can coconut water be recommended as a better choice than water or sports drink after moderately intense training?Author: My Green, Joakim LundSupervisor: Henriette PhilipsonExaminer: Frode SlindeProgram: Dietician study program, 180/240 ECTSType of paper: Examination paper, 15 hpDate: May 26th, 2014Background: Already in the 1960s an alternative to water as a rehydration fluid occurred, the so-called sports drink. Coconut water has in recent years been claimed as the "natural sports drink" in media. Coconut water is sold in shops and fitness centers around the world and has established itself as an alternative to water and sports drink in terms of rehydration after a workout.Objective: To investigate whether there is scientific evidence to recommend coconut water as a rehydration drink after moderately intense exercise ahead of water or sports drink.Search strategy: The search for articles in this systematic review was performed in the databases PubMed, Scopus, Cochrane and GUPEA.

AbstractTitle: Foreign news coverage. Does the media influence the action in international crises? (Utrikesbevakning. Påverkar media agerandet i internationella kriser?)Number of pages: 39Author: Charlotta AndréssonTutor: Professor Lowe HedmanCourse: Media and Communication Studies CUniversity: Division of Media and Communication, Department of Information Science, Uppsala University.Date of submission: 2007-01-03, autumn term of 2006Purpose/AimThe purpose of the essay is partly to examine if foreign news coverage influence the political agenda setting and the incentives of the public?s willingness to give charity for humanitarian crises.

ABSTRACTThe aim of the study was to examine the prevalence and the location as well as the registration of gingival recessions among patients between 20-29 years of age, who are treated on the Dental Hygienist Programme at the University of Kristianstad. The study was performed as a recording study, where the first page of the base record paper was examined. We examined 295 base records. The result showed that gingival recessions only were registered on 3 % (n=10). Most of the injuries, 53 % (n=157), had been registered as toothbrush trauma.

Titel: En utvärdering av de anställdas arbetsmotivation vid LantmäterietTitle: An evaluation of the work motivation of the employees at LantmäterietLevel: Final assignment for Batchelor Degree in Business AdministrationDepartment of Business AdministrationUniversity of GävleBOX 6052 GävleSwedenAuthor: Söderberg AnnaDate: 2006-06-08Supervisor: Gaddefors JohanEngvall ErikaPurpose: The main purpose of this study is to create a picture of the leadership,communication and organisation cultures effect on the motivation.Nyckelord: Motivation, ledarskap, kommunikation, organisationskultur, LantmäterietKeywords: Motivation, leadership, communication, organisation culture, Lantmäteriet.

?Mechanical debridment ? A studie in irrigation optimization? is a final thesis which was executed by Fredrick Ekman, in close collaboration with the other group member Mikael Johansson, during the spring 2012. The thesis was carried out through Karlstad University Faculty of Technology and Science in the study program of Innovation and Design Engineering (180 ECTS credits). The client of the project was Medilink AB located in Lindesberg, and the contact person was Nils-Erik Söderström, Chief Executive Officer. The project was supervised by lecturer, Lennart Wihk, and examined by lecturer and professor Fredrik Thuvander at Karlstad University.

This thesis was conducted at Linköping University and SAAB Aerostructures, Linköping, and focuses on the automation of flexible fixturing in machining applications. At Linköping University a project called "Koofix" is conducted with support from Strategiska stiftelsen and several manufacturing industries including SAAB Aerostructures. The purpose of this project is to develop a more cost-effective, flexible, technique for fixation of workpieces during processing and assembly.Fixtures are an important part during the machining process, especially if you process the parts with high accuracy. Today a large number of fixtures are used at SAAB and they would prefer to reduce the number of fixtures by using flexible fixtures instead. SAAB uses one fixture for each article and this result in a high fixture cost and it also takes time to design and construct a new fixture.There are several advantages with using a flexible fixture such as that you can process workpieces with different length, height and thickness in the same fixture.

In this thesis I will propose and test a pipeline for creating in-game animations using motion capture technology, with the aim to export to a 3D game engine, such as UDK or similar. Even though there are already established pipelines for creating in-game animations in the game industry, they are not of public knowledge and dissemination of information is hindered by the severe NDA (non-disclosure agreements) imposed on the studios and artists. I will therefore use my experience with game production and as a student, to research and propose an optimal pipeline for developing in-game animation that may be used by other students, researchers and independent game developers. The methodology used to test the pipeline will be a case study based on the student project Synergy, which I am developing with other third year students also attending the Game design Education at Gotland University..

The report describes the thesis I, Philip Bergstrom, have done at the University of Gotland. The work comprises 15 credits and is at bachelor level and has been done in collaboration with Lyktan Bankeryd Belysning.The project consists of developing the design of a kitchen lamp for the Swedish home following the catchwords stripped French bistro that will fit into the Lyktan Bankeryd lighting spring collection 2013, and it should not look too alike any existing lamp on the market today.The work includes analysis of the company's current products and the image the company wants to project, analysis of three other companies' products to draw inspiration from, and a simple ergonomic study of the lights in the kitchen.The final result achieves the demands made and fits well in the intended environment, there is also the possibility for further development of both a floor lamp and a wall lamp..

This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..

The purpose of this study is to investigate and describe what factors are most important to students when choosing training center, and how these factors affect the choice of each training center. We investigated this by performing a qualitative research and a quantitative survey of students at Karlstad University that trains at Friskis & Svettis and Sats in Karlstad. The results show that there are a number of important factors in the total customer experience that affects a student's choice of training center and that they also differ between a premium center and basic center. Our conclusion is that when a total customer experience concept consists of a core, core experience and peripheral experiences well linked into each other competitive advantages is created, resulting in more satisfied and loyal customers. .

This master thesis has been performed at the department of Machine Design at KTH, The Royal Institute of Technology. The thesis has been a part of a global development project in collaboration with Luleå University of Technology, Lund Faculty of Engineering and Stanford University. Corporate liaison and sponsor has been Immerse Global Inc. The project was also performed on sponsorship from the Product Innovation Engineering Program, PIEp. The thesis is a representation of some of the contributions made by the authors.The lack of clean drinking water is one of the key issues facing the world today.