This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

Acupuncture has been used for thousands of years in China. Written documents concerning veterinary acupuncture has been found dated around 650 B.C. Acupuncture has gained greater acceptance in the western world the last decades and many countries have established their own veterinary acupuncture organizations. Many studies report good results after acupuncture treatment and back pain in horses is considered a good indication for acupuncture treatment. In studies published, the results are subjectively evaluated. To get a qualitative, scientific evaluation of acupuncture treatment, objective measurements, control groups and statistical analysis are needed. This pilot study presents a case where acupuncture has been used for treatment in a horse that was diagnosed with back pain.

Research in solar energy is taking big steps in both solar heating and solar electricity. It´s not only the technologies alone, but also the combination of both solar electricity and solar heating which is what is called a solar hybrid. The idea of a solar hybrid is that a solar cells efficiency decrease with increased temperature and can with help from a solar collector be cooled and the heat can be utilized. This thesis report compares heat production and electricity production with respect of, in first hand, a solar hybrids geometry in the cooler. The theory chapter describes solar heating and how different solar cell technologies work and their environmental impact at the production and how compatible these technologies are for the solar hybrid.

Outdoor housing of horses? best fulfils the horses? need for physical activity and it is an alternative to the more cost and energy demanding indoor housing in stables. Furthermore, if outdoor housed horses have access to shelter they can generally cope well with adverse weather conditions such as high or low ambient temperature, heavy rain or strong winds. In this study, the daytime shelter-seeking behaviour of three groups of horses housed outdoors was studied during the summer. The aim was to evaluate whether shelter use is related to weather variables (e.g., ambient temperature and wind speed) and insect harassment. The shelter-seeking behaviour was studied for three different groups of horses: Group 1) eight individually housed horses in paddocks that had access to three different shelter types (C: closed on three sides with roof, R: open on three sides with roof, W: closed on three sides without roof), Group 2) 25 group housed mares with foals on pasture with access to shelters C, and Group 3) ten mares without foals on pasture without access to shelter. Each group was studied for eight days.

This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

In this thesis tests has been performed on the pull strength of screws glued into glulam beams.The experiment is based on the already approved method whereby the diameter of the drilled holes is the same as the screw outer diameter of 1 mm or bigger. The screws strength class shall not be less than 4.6 (EN ISO 898-1:1999, 1999).The difference in the experiments that were performed where that the drilled diameter were 1 mm smaller than the outer diameter of the screw so that the screw thread was worked into the wood.In the tests the gluing where made on M8 glulam beams. The screws where drilled at and angel of 90°tangental to the fiber direction with a diameter of 7 mm. The gluing of the screws where made in three different depths and where later exposed to pulling forces. The results showed both pulling breaks and screw breaks when they reached their maximum capacity.

The purpose of this bachelor degree thesis is to analyze technical issues associated with an implementation of a low sloping trash rack with narrow spacing. A hydropower plant in Umea?lven was used as a case study. The basis for the study was a model where trash racks were dimensioned for inclinations between 25 and 45 degrees. Corresponding head loss, durability and water speed through the rack were then determined for each inclination.

There are more and more elderly people and different diseases will affect them. How will the public care be able to face this need of care for the elderly? There are a lot that shows that there will be an increasing demand on the achievements of the relatives. How can this development be answered to? Shall the achievements be concentrated on giving support to the relatives, or will there be a concentration on nursing staff? The purpose of the study was to enlighten who elderly people will be nursed by if a disease affects them.

The project description is to draw an extension or annex to the existing Nationalmuseum building from 1866.The annex is designed to complement Nationalmusems activities and contain internal and public functions. Artentering the building must not be crossed by public visitors. Art and staff must be able to seamlessly move betweenthe extension and the main building. The new building includes a public study room for scholars working withthe collection of art on paper, workshops, conservation studios, art spaces and warehouses. Additionally, theannex is designed to host a large number of office spaces.With the renovation of Nationalmuseum they intend to open up the today built in south atrium.

Today, branding is not a phenomenon but rather a prerequisite for a brand to be able to both survive and grow stronger. During the last couple of years, personal branding has come to be an established term, just like corporate branding. With the growth of the social media and the thousands of ways to interact with each other personal brands face great competition. It is more difficult than ever to maintain a strong brand, partly because of this. There are several growth options for brands.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

The project description is to draw an extension or annex to the existing Nationalmuseum building from 1866.The annex is designed to complement Nationalmusems activities and contain internal and public functions. Artentering the building must not be crossed by public visitors. Art and staff must be able to seamlessly move betweenthe extension and the main building. The new building includes a public study room for scholars working withthe collection of art on paper, workshops, conservation studios, art spaces and warehouses. Additionally, theannex is designed to host a large number of office spaces.With the renovation of Nationalmuseum they intend to open up the today built in south atrium.

There are more and more elderly people and different diseases will affect them. How will the public care be able to face this need of care for the elderly? There are a lot that shows that there will be an increasing demand on the achievements of the relatives. How can this development be answered to? Shall the achievements be concentrated on giving support to the relatives, or will there be a concentration on nursing staff? The purpose of the study was to enlighten who elderly people will be nursed by if a disease affects them.

The project description is to draw an extension or annex to the existing Nationalmuseum building from 1866.The annex is designed to complement Nationalmusems activities and contain internal and public functions. Artentering the building must not be crossed by public visitors. Art and staff must be able to seamlessly move betweenthe extension and the main building. The new building includes a public study room for scholars working withthe collection of art on paper, workshops, conservation studios, art spaces and warehouses. Additionally, theannex is designed to host a large number of office spaces.With the renovation of Nationalmuseum they intend to open up the today built in south atrium.

This thesis aims at determining the heat losses in a property vent stack and its roof valve. Upon request of a company, the vent stack is analysed for possible heat recovering solutions to be implemented, while relining of the drain system is executed and with a suitable payback time for the economic investments. The heat loss calculations are based on data for properties that are located in the Stockholm region, but also easy to change depending on the situation. The calculations are done on pipes made out of cast iron, which still is the most common type of drain pipe in Sweden, and these are the pipes that relining is usually made on. The calculations that needed to take several variables into account have been done in MatlabR2014a and the thermos dynamical properties that were used in those calculations have been extracted from EES.Three different types of heat losses in the vent stack have been taken into consideration in this thesis.