Oxygen consumption and carbon dioxide production are usual measurements within the sports and training physiology. The same measurements are also common when it comes to establish the amount of energy that is used during work and to establish the intensity of work. The volume of oxygen that is consumed contra the volume of carbon dioxide that is produced can be used to calculate the metabolic rate within the human body. This calculation shows the percent relationship between carbohydrates and fat in the metabolism. The first accurate method to measure the breathing gases for use in metabolic calculation was established in the early twenty century when the Douglas bag method was introduced.

The objective of this study was to get a better understanding of how the cultivation methods influence the vitality in Prunus avium. The purpose was also to examine if there was any differences in shoot growth and trunk expansion depending on the method of cultivation. To find the answer to this question a literature study and a case study has been done. The literature study concerns the concepts vitality and stress. Different definitions of these concepts are shown and their connection whit establishment is explained. In the background the species Prunus avium, and the four method of cultivation that are included in this case study are described. Measurements of the shoot growth and trunk expansion were made in this study, and as a complement to these methods, a visual estimate of the vitality was made.

Title:?Speed cameras - an prevention of crime and a standard forming instrument of control??Authors: Markus HanssonTutors: Bo Isenberg & Carl HultExaminator: Ulf DruggeThe School of Human SciencesUniversity of KalmarThe studys purpose is to get a absorbed understanding for peoples attitude, and effect of speed cameras. The disposition for the study is to integrate earlier studies in the matter, combined with elevating interesting sociological conceptions. As an attempt to understand speed cameras as an instrument of force on the individual have Michel Foucaults concept Panopticon been used to see its effect, and it?s look upon how crime prevention will be formulated, which can give an explanation of why speed cameras are being used as an instrument of control on the traffic area.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The aim of this inquiry was to investigate the most appropriate measures to reduce noise impacts from road traffic on the Nydala recreational area in Umeå municipality due to the planned re-routing of the E4 motorway to an existing road along this area. The sound environment is an important part in the experience when we are visiting recreational areas. Noise is not only disturbing; the liberty from unwanted sounds also allows us to perceive natural sounds that are a benefit for the cultural experience. Therefore it is important to take actions to protect this well used area from traffic noise. The reasonable options to avoid noise impact in this case are to lower the speed limit, using a noise reducing coating or use noise protection screens and walls.

The different material layers as part of a road construction fill all a function so theroad becomes durable, safe, comfortable and aesthetically pleasing. Recently, anew group of construction materials started to play an important role in roadconstruction ? geosynthetics.This thesis addresses the two most common types ofgeosynthetics used in modern road construction, namely geogrids and geotextiles.The most common use of geogrids is reinforcement of poor subgrade by usinggeogrid soil reinforcement, which occurs when road material particles wedge inthe geogrid?s mesh. Geotextiles act partly as a barrier that prevents the finermaterial in the below ground from being mixed with coarser upper material andalso act as a load spreader.Road contractors often face a choice of whether geogrids and/or geotextiles areappropriate in a particular road project and also how much profit the choice mightbring. This phase in the tender calculation process is the intended scope of thisthesis.The thesis deals with both the "hard" cost-function aspects and the "softer" values e.g.

Stage-discharge equations for lakes without disharge measurementsSimon AnderssonIn 2015 all lakes, rivers, coastal water and groundwater should be of good ecological statusaccording to the water framework directive from the European Union. In the process ofimproving the quality of Swedish water bodies, knowledge of where problems occur isneeded in order to utilize the resources optimally. The ability of lakes to store water is animportant factor since it controls the flow of water through the country. A stage-dischargeequation is a mathematical relation between discharge from a lake and its water level. Bybetter understanding of stage-discharge equations for lakes, their storage capacity can bedescribed better in hydrological models.This master thesis aims to evaluate methods for determining stage-discharge equations forlakes where a variable amount of field measurements is available.

The Swedish government has set up the overall goal that no net emissions of greenhouse gases can occur after 2050. A sub-target has been developed for road transports which states that the use of fossil fuels must be reduced with 80% to 2030 in order to be completely abolished to 2050. A public inquiry mapping how this can be achieved was handed in to the government late in 2013. The use of alternative fuels for road transport, both biofuels and electricity, is expected to give the biggest contribution to the reduction of the use of fossil fuels. The inquiry sets up a number of goals for how much the use of alternative fuels must increase to 2030 in order to reach the overall goal and which instruments that are needed in order to do so.The aim of this thesis is to evaluate how these goals can be reached and what the most likely obstacles that may hinder the reaching of these goals may be.

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

Heavy duty vehicles often have problems with traction during the winter periods. For vehicles that can lift tag axles it is possible to increase the normal force on the driven axle by lifting one or more tag axles, this will then increase the propulsive force of friction. This however increases wear on both road and vehicle. A possibility to reduce the wear while achieving nearly equivalent traction compared to lifted tag axles is to allow the vehicle to regulate the normal force by lowering the pressure in the air suspension associated with the tag axles or by the lifting of these axles. The vehicle would then by itself be able to set just the right amount of normal force on the drive wheels to avoid unnecessarily high normal forces while maintaining sufficient traction.The purpose of the report is to find out which parameters affect heavy duty vehicles when driving on slippery slopes and how traction can be improved.

A product and design development of a household device which shall dry food waste has beencarried out in collaboration with Smedlund Miljösystem AB.This project has been implemented through several brainstorms and a questionnaire study.A great insight of how it is to work in a project in real work life has this project been givenme. This is a slightly less straight road to a conclusion than in the academic world that I amused to..

In a multi-year project at Swerea Swecast AB studies on influence of dissolved gas on inclusions have been made. The knowledge about these parameters could be used to increase the quality of the final steel casting. The purpose of this thesis was to closer examine the impact of the oxygen level on inclusions.The questions asked were:? What was the amount of inclusions at different levels of oxygen?? What was the size of these inclusions at different levels of oxygen?? What does the inclusions consist of at different levels of oxygen?This was studied by measuring and sampling, sample preparation and microscopic analysis using an optical microscope and a scanning electron microscope (SEM). Measurements and sampling was performed at Smålands Stålgjuteri AB in Eksjö and at Swerea Swecast AB in Jönköping.

Detta är vårt C-arbete där vi valde att göra ett sällskapsspel av vår frågeställning. Spelet går ut på att producera en film, den spelare som producerar den bästa filmen vinner Oscar för bästa film och även spelet. När man spelar spelet så lär man sig hur en filmproduktion går till och vilka komponenter som är extra viktiga när det gäller bedömningen för vinnaren av Oscarstatyetten för bästa film..

Objective: The aim of this study was to compare equations used to calculate BMR to values of BMR obtained from measurements in order to determine the most suitable equation to be used on children and adolescents with CF.Design: The participants where children and adolescents with CF. Data was collected from the division of Clinical Nutrition at Uppsala Akademiska Sjukhus. Age, weight, height, BMI, BMR, FFM and FM was recorded from 27 measurements. BMR from the participants collected from the indirect respiratory calorimetry was compared to the results obtained from five equations used to obtain a calculated value of BMR.Results: Tverskayas equation was best correlated with the measured BMR for the whole group. The equation underestimated BMR for the participants with a measured BMR over 1400 kcal/24h and overestimated BMR for participants with a measured BMR under 1400 kcal/24h.