The construction and real estate industry represents a significant part of Sweden's total impact on the environment and mainly affects the following national environmental objectives: reduced climate impact, a good built environment and a non-toxic environment. By establishing internal rules, companies within the industry can reduce their environmental impact. SMT (AB Sandvik Materials Technology), a part of the industrial group Sandvik AB, has set a target that during 2014 develop a guiding document with special consider to the environmental impact during construction of office buildings, that they establish at the Swedish regional capital Sandviken, for both internal and external tenants. This study therefore aims to clarify which environmental aspects that the construction and real estate sector mainly are responsible for, and therefore should be part of a guiding document for a company for establishing office buildings, and to present arguments regarding the use of such a document. The study is based on literature studies and personal contact with other companies, in the form of e-mail conversations and a telephone interview.

Höga byggkostnader, kvalitetsproblem, dyra kostnader för omprojektering och låg lönsamhet för entreprenörer är exempel på problem inom byggbranschen. Statistik pekar på att byggkostnaderna för att producera byggnader har stigit kraftigt under de senaste åren. Byggnadsentreprenörer har börjat utveckla alternativa metoder för att genomföra kostnadseffektiva projekt. Denna studie kan delas upp i två delar, en teoretisk och en empirisk del. Den teoretiska delen utgörs av litteraturstudier för att få djupare kunskap och förståelse om Lean konceptet. Den andra delen avser en empirisk studie.

Urban agriculture is a current topic and this study examines the possibility of cultivating on balconies in the city. The study was performed at Uppsala University and examines, from a structural engineering perspective, how different existing balcony/terrace structures are affected by cultivation. A cultivation balcony defined in the study as a balcony/terrace which is specifically designed for cultivation. Three units of study have been selected according to this criterion. Four factors were examined, these were loads, moisture/water, economy and cultivation.

When constructing a new house many questions appear, from architecture to decisions regarding installations. Sweden is situated in a cold part of the planet and questions regarding which heating system to install face everyone who decides to build a new house. This thesis describes a construction solution of a villa in Kiruna. The extended essay analyzes which heating system is most suitable for the construction. The options are geothermal, district and pellet heating systems.

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

The society strives for sustainable development, in the construction industry it is expressed through sustainable building. Energy and LCC analyzes increases the ability to make conscious decisions in the process. A problem in the construction industry is that energy and LCC analysis is not used to the desired extent, as they are perceived as complicated and time consuming. The report aims to achieve a more sustainable building through increased use of energy and LCC analyzes.The goal is to show how BIM can be used to improve the efficiency of the energy and LCC analyzes.The study was conducted with a literature review and a case study to answer which information that is required in a BIM model to perform energy and LCC analyzes. The study also shows which software can be used in BIM based energy and LCC analyzes and how the analyzes can be carried out efficiently.The result shows that effective analyzes may be performed if the BIM-model contains the relevant information for making analyzes.

The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.

In the EU there are EC Directives that Member States of EU should follow. Sweden has undertaken to transpose EC Directives regarding the working environment to Swedish Provisions.  In 4 April 2006, the European Commission had some criticism against the Swedish implementation of the Construction Sites Directive. The Swedish Work Environment Authority has in response to this criticism reworked the Work Environment Act and related provision about building and civil engineering work. The changes came into force 1 January 2009.These changes have resulted in some working methods and even new responsibility subjects must be reviewed. The purpose of this exam project was to investigate if contractors and clients in the construction sector, had have time to update themselves on this front and adapt to these changes.

The way society categorize different people into groups is problematic in the sense that the categorization can seem stigmatizing and have social consequences for those being categorized. Immigrants are one of those problematic categories.The following essay studies this categorization of ?immigrants? based on a governmental investigation of structural discrimination that took place in 2002-2008. The aim is to study the use of the category ?immigrant? and the consequences that follows such a categorization.

The purpose of this paper is to examine whether, and if so, how tourism effect the construction of a new city district with a stadium in focus. The study is based on a case study of Swedbank Arena and Arenastaden as nearby area. There has been an interest from the writers to study Swedbank Arena and Arenastaden, as it is a current subject, and both of them are under construction, which means that it was possible to see how the process works from the ground up. It has been shown that Swedbank Arena is built up in an entirely new district in which there will be new infrastructure that is tailored to the stadium and the crowd it?s expected to attract.

The product "urinal funnel" for women has fascinated me for a long time. Not only because it solves a practical problem in a simple way, but also because it challenges our definitions of gender and behaviour. This report describes the process of making a new design for a funnel, taking material, ergonomics and construction in consideration. It also includes structuring a launching of the product in Sweden. It starts up with a large amount of information gathering, both by interviewing testgroup-perticipants, but also by researching and evaluating the range of existing funnels.

The aim of this study was to shed light on how journalists describe the child?s world and what gender labels are used in their descriptions. We wanted to get a better understanding of what happens when gender is constructed.In order to study how gender is constructed, we chose to examine how the children?s magazine Kamratposten describes children?s spare time. We chose Kamratposten because it turns to both girls and boys.

Syftet med examensarbetet är att ta fram förbättringsförslag som höjer leveranssäkerheten för transmissioner och axlar vid Volvo Construction Equipment Components (CMP) i Eskilstuna. För att möjliggöra detta har en tydlig bild över företagets situation idag skapats. Enligt kunderna anser CMP vara en av de sämsta leverantörerna, vilket verifierades när den genomsnittliga leveranssäkerheten uppmättes till 30% i den utförda undersökningen. Den dåliga leveranssäkerheten är till stor del egengenererad och skapas genom en ond cirkel av länkade problemområden. Den onda cirkeln börjar med dålig leveranssäkerhet vilket medför svängningar i produktionen som förstärks genom sättet att planera och anskaffa material.

Aeroseum is an aviation museum located in an old military underground hangar. The ventilation system in the hangar is designed for the military purpose of the hangar. This design includes a solution with air flowing through the space between the construction of the hangar and the rock surface. The solution is intended to avoid a buildup of inflammable gases. This design leads too high humidity levels in the hangar.

The student project Elba at KTH started in 2011 and is a project where a battery driven prototype car is developed. The vehicle competes in Eco Shell Marathon in Rotterdam, Holland. In this competition the vehicle that travels a certain distance including several starts and stops with the lowest energy consumption wins. To minimize the consumption is therefore very important, which requires knowledge of the vehicles energy losses.A vehicle's energy losses depends on several factors and can be divided into the powertrain efficiency and the driving resistance. The driving resistance can then be divided in to rolling and air resistance, if smaller losses like vibrations are ignored.