Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.

Highland Group AB was helping a customer of theirs to create an All-Terrain Vehicle (ATV), a project Highland has never been involved with before. For the wishbone arms of the wheel suspension, traditional manufacturing methods and tubes with cylindrical or square shaped cross section was preferred. We performed a simulation where the ATV was driving on a bumpy road too see the forces involved. With the results we proceeded to calculate the strength of the concepts to find out which is best suited for the tough environment in which the ATV is used. The concept that turned out to be the best was a wishbone made of circular cross section, which had good structural strength and did fulfill the demands that we required for the construction.

The problems around and the planning of wood flow is some of the most complex issues in the forest-sector. The experience and overview of the single employees is crucial for the possibility of correct tactical and economical decision-making. The increasing demand of savings and shorter reaction-times with greater flexibility in the wood-supply-chain, makes solutions and aids for improved effectiveness in the work and processes according to wood-flow urgent. Holmen Skog is starting to develop a new forest-road-management-system. The system will facilitate the work according to construction, improvements and updating the standard of roads.

Through previous studies during my education, I have experienced that chemical deicing road salt is a known problem, mainly in southern Sweden. Road salt causes damage to the environment and also damage to vehicles and structures such as bridges, etc. Road salt causes vehicles and steel constructions to rust, leading to increased costs for repairs of damage to structures. Road salt also causes damage to the plants and the economy to suffer, when plant material and soil needs to be replaced. In order to get closer to a solution, I put up three questions.

The interaction between the driver, the car and the road is essential for the road safety. This case study focuses on the road condition and its effect regarding road safety issues. By studying and isolating the road condition aspect and its contributing role to the accident occurrence, the aim is to explore their relationship, as well as highlight the road parameters that are commonly associated with accident occurrence. This result will be used to develop and increase awareness of the impact of poor road alignment and poor road surface conditions on traffic safety, in order to prevent these accidents from occurring. The road parameters chosen for this study include side friction, cross slope and rut bottom cross slope, road texture, curvature, drainage gradient and rutting.The case study was limited to lv 360 in Va?sterbotten, where all accidents with an unclear cause of the accident were studied, between 2003 and 2012 were carefully studied and assessed based on the condition of the road at the time of the accident.

This paper focuses on the employers? responsibility as described in the 11th section in the Employment (co-determination in the workplace) Act of 1976. The questions asked are to determine whether the law in the 11th section is followed in real life and if the consequences for breaking the law are a deciding factor. This paper summarizes the law as it is interpreted today and in what situations it is applicable. Since the law and especially section 11 affects certain individuals and organizations, the paper also describes who these individuals and organizations are and how they are affected.

approaching Boden deals with the approaching of a city, both in a physical sense ? along the road ? and in a spiritual sense ? in mind. The physical encounter with a city is represented by the experience of the road and its surroundings, while the spiritual encounter is represented by the idea of the city that we already have, or will get, in our minds. We have in this degree project approached Boden through a thoroughly analysis of both the entrance roads and the city itself. In this degree project we are looking for ways of how to create characteristic and interesting entrance roads to a city, with Boden as an example. This demands knowledge about the problems involving entrance roads as well as the distinctive features of the city.

SUMMARYThe demands on the public environment are big and in particular on the environment of communication which we spend a lot of time in on our way to work, school etc. The city-approach is a Road Section that leads from the periphery of the city to the centre of the city, often through boring and meaningless industrial areas that displays the back side of the city to the voyager on the city-approach. The intentions of this thesis in landscape architecture has been to study one of the two city-approaches to the city of Luleå, the close surroundings and contextual position in the city and not at least give suggestions of ways how the city-approach can be changed, clarified and improved. The study of the city-approach has been made by studying literature that concern city-approaches and the architecture of roads in general. Studies of different analysis methods has been made to find appropriate approaches to work with the specific study of the city-approach to Luleå.

This work derives from the question ?What is a beautiful road??. The question is being discussed in interviews with two employees at the Swedish National Road Administration and two former members of the ?Council of environment and beauty? at the Swedish National Road Administration. The interviews are summarized in my own discussion about the concept of ?Beautiful roads?.

Assessment of impacts on nature and reindeer husbandry by the considered mountain road between Borgafjäll and Saxnäs- Swedish National Road and Transport Research Institutes method for assessment of damage to heritage assetsThere are plans regarding the building of a new road from Borgafjäll/Båtas to Saxnäs, and two road alternatives have been presented. The road has been localized to an area which is protected as a nature reserve and listed as a Nature 2000 area. This report aims to determine the effects on the Nature 2000 area and reindeer husbandry, and to be a source of knowledge for future environmental impact assessment in that project. In order to assess the impact on nature values and reindeer husbandry a method from the Swedish National Road and Transport Research Institute (VTI) has been used. A literature review has been made to prescribe the effects and consequences.

The technical achievements that have occurred in recent years have led to a greater use of the Internet around the world. Today, more and more people are using virtual communities, a place where communication occurs with people who have similar interest. Due to the option of being an anonymous user, the concept of trust plays a big part in how virtual communities are working. It is therefore of interest to investigate how trust develops between users in virtual communities. This report asks the following question:"How is trust formed between users at a virtual community?"A qualitative and netnographical study was conducted to answer the question above.

The objective of this thesis was to develop a method for the planning of road upgrading at Holmen Skog, a Swedish forest company. A critical issue for creating such plans is to identify roads that are suitable to upgrade to a standard that can handle heavy traffic during spring thaw, since spring thaw is a bottle neck for transporting timber. The method was tested in a case study at a district. The work consisted of two parts. The first was to retrieve and prepare geographical data for the roads.

The Swedish Transport Administration has, and manages, a database containing information of the status of road condition on all paved and governmental operated Swedish roads. The purpose of the database is to support the Pavement Management System (PMS). The PMS is used to identify sections of roads where there is a need for treatment, how to allocate resources and to get a general picture of the state of the road network condition. All major treatments should be reported which has not always been done.The road condition is measured using a number of indicators on e.g. the roads unevenness.

To invent an optimized product is a complicated process. This process is only half of the work. It is equally important to develop a production system that can produce the product in an  efficient and ergonomic way.After several evaluations of conceptual and detailed drawings a final idea has come to light.The idea intends, to the maximum extent, utilize the facility in a more efficient way through moving assembly lines and stations closer to the flock section and the stock for complete products. To make the production better, stations are placed in more logical places given the assignment they are supposed to accomplish. This improves the material flow radically.

The purpose of this thesis was to create a strategic/tactical road access plan. This was done by designing an analytical method which gives the road manager a template to create long-term road access plans. The analytical method will help to identify and appraise roads to be upgraded and give information when it is time for building new roads. The study method involved developing an analytical method. The method was comprised of five main parts: the harvest plan, analysis of the road network, transport costs, quality and storage costs and finally, identification of investment alternatives.