It?s a fact that the climate is affected by the vehicle that runs on the worlds roads. But theconstruction of the road itself is rarely thought of as a climate threat. Svevia and the Swedish roadadministration have opposite views of how the construction of roads should be carried thru. It?sthe difference between those two construction methods that is the base in our thesis.The amount of energy use or the emissions are not analyzed for neither the Swedish roadadministrations nor Svevias construction models.

The thesis mission is to investigate whether the swiveling laser that Vectura (former Vägverket Konsult) has in use to measure the road areas and straddle measuring can be used to detect differences in the reflective road markings function. This is to increase use of the swiveling laser and get rid of the manual measurements performed today.Currently, the measurement of road markings reflective function is performed with both mobile and handheld measuring instruments. The purpose of this thesis is to develop better methods for determination of road markings? reflective function, in order to facilitate the description and suggestions for improvements of the maintenance of road markings reflective function.The questions that the thesis has been to start with are:Can the swiveling laser detect differences in longitudinal and transverse road markings reflective function?The accuracy of measurement has been sweeping the laser over the reference instrument (LTL-2000)Is it necessary with a conversion factor for swiveling laser data against the reference instrument data?To answer the question 2 and 3, there has been a field work in Värnamo where a road stretch with longitudinal road markings and zebra crossing (transverse road markings) has been investigated with a swiveling laser and LTL-2000.The formulas and calculations contained in the thesis are drawn from scientific reports that are produced by VTI in Linköping. The same formula that was used to calculate the optical measurement data was also used for the swiveling laser data.

This report details the development of an application for personal safety for the Android operating system. Android is a relatively new platform, primarily used on mobile phones.The purpose of the developed application is to give the user the possibility to easily and quickly alert a number of contacts by phone in case of emergencies, and to show the user?s location on a map. This is not only used during emergencies, but for other purposes as well ? for example to monitor a jogging round.The project was carried out in co-operation with the company D-Safety, the developer of the "SoftAlarm" ? the product on which the developed application is based..

This report that is written in cooperation with Peab Sverige AB, studies the information and knowledge management from the production support to the production management. The conclusion of this report is that to have a good and functional information and knowledge management it is necessary that the company has a good way of regain and handling experiences from its projects. The way to do this is to develop the managing system on the production management?s terms. It is also critical to find an easy way for the production management to use the system..

Uppsatsen är baserad på en fallstudie gjord på Tetra Pak. Syftet med fallstudien var att utforma en lista med faktorer att som bör beaktas för att ett införande av ett Competence Management-system ska bli framgångsrikt. Tillvägagångssättet i fallstudien har varit en dokumentstudie och ett antal intervjuer. Använda teorier är hämtade från områdena Change Management, Knowledge Management, Competence Management och Human Resource Management. Undersökning resulterade i ett antal intressanta faktorer som bör beaktas.

There exists a great need among companies and other organizations to be able to visualize statistics. It?s also increasingly common to ask for web-based solutions for increased flexibility and accessibility for users. This paper describes how large amounts of geovisual data, for a large number of regions, can be visualized in an interactive and well-presented manner. The paper let?s you walk through two application scenarios, developed in a Flash environment, using the GeoViz component library for visualization. The first application has been developed for Statistics Sweden (SCB), to give a solution on how to visualize statistics for Sweden?s zip code regions.

In my essay I'm studying what aspects of the school environment that influences the pupils experience of safety and what aspects that strengthens the experience of safety. I'm introducing three different dilemmas from three different places in the school environment. The three dilemmas have that in common that they focus on safety. I'm introducing the after-school centre commission according to the National Agency for Education, presenting results and theories from various researchers and authors about how you can work with safety regarding children's development and learning. My conclusion is that safety is a very important aspect when it comes to learning and for the overall development of children.

The aim with this thesis is to study the risk management in construction projects at the Swedish Road Administration, SRA. Furthermore, the aim is to find the effects of the risk management. The theorem of this thesis is that the positive effects of the risk management in construction projects create additional value to the project. These additional values are that the project itself becomes resilient and that the project goals are achieved without any significant disturbances.This thesis shows that the risk management in construction projects do not follow the guidelines set out by the SRA. This is due to a lack of education in the method and a difficult method all together.

Background: Every year, more than 1000 cases of adverse events are reported in the Swedish health care system. These adverse events cost approximately 240 million Swedish kronor each year. By explaining the factors that cause nurses to make mistakes when they have too great a workload, it is hoped the awareness of health care staff will increase. Aim: To perform a literature review which describes factors that can endanger patient safety when nurses experience too great a workload. Method: A systematic literature review encompassing both quantitative and qualitative material.

The purpose of this thesis is to show how a good approach can be designed, focusing on the southern approach to the Swedish town Vilhelmina. Prior to the car being part of everyday life, the approach was a road where the town showed itself from the very best side. When the amount of traffic increased, so did noise and other disturbances, and as a consequence industrial areas replaced the residential buildnings at the approaches. Today, the pendulum is turning back and in recent years the approach is regarded as a place to introduce the town. The approach is also the place where cars should slow down from the speed of the main road to the speed of the city.

Safety in the construction industry has become a question of top priority in recent years. Despite a massive investment of time, money and knowledge, the occur-rence of fatal accidents in Sweden alone is around one a month.The purpose of this study is therefore to improve the safety on the construction site. By an examination of the role of the safety agents and their cooperation with the construction workers and supervisors as well as examine how safety agents can improve safety on the construction site, which is the goal of the study.Four questions were formulated based on the purpose and the goal of the study.The methods used to answer the questions were a questionnaire survey, multiple interviews, a literature review and a document analysis.The report describes the safety agent?s role as a complex one with many different tasks. The role of the safety agents is regulated in the health and safety law, but it can sometimes be difficult to interpret and the agents can therefore interpret their role differently.

As the ability to computerize processes and tasks increase, the proliferation of complex systems in our society continues. How these systems are deployed in the organizations where they are meant to be utilized has been shown to have a large impact on how well they function.In January of 2011 the Enköping hospital initiated the deployment of an IT-support for drug management, a module in the general health care system Cambio COSMIC. Other health care providers in the county, and in the rest of Sweden, have had mixed feelings toward the module. Some have outright refused the module, claiming that it is detrimental to patient safety. One of the arguments for deploying the module in Enköping, however, was that it was needed to improve patient safety.The Enköping hospital is considered to be a well organized institution with good leadership and earlier good experiences regarding IT-systems.

Fall accidents are a big problem in the construction industry today and stand forapproximately 23% of all accidents. Skanska is a construction company that has avision toachieve zero accidents. Eliminating fall accidents is one step on the way towards theirvision. The state of Skanskas fall safety has been analyzed in this thesis to show whichimprovements are possible in fall safety.A literature study has been performed in which Arbetsmiljöverkets (The Swedishwork environment authority?s) laws and rules, together with Skanskas own rules havebeen studied.

The accident frequency in the construction industry has shown a downward trend every year but this trend was broken 2010th. It is often lack of precautionary measures within work environment and safety that is the cause of accidents. The big construction companies understand the importance of precautionary measures within work environment and safety, as they spend a lot of money and time on that matter. By examining the work environment and the safety of the small construction companies you can see how they work. The report will presents how these small companies work with work environment and safety, and also how they follow the safety instructions that are available and how they make use of safety equipment.

This document is a summary of my work to create a project management system for a small firm working with computer graphics. The intention is to manage customers, projects, images and invoices in the easiest possible way. To make the system as flexible as possible a web-interface was chosen which makes it possible to access the system from any computer, making it independent of any particular operating system. The only requirement on the user environment is that the computer must have a connection to the Internet to be able to access the system. The different techniques that have been used to develop the project management system is primarily Ruby on Rails and a MySQL database.