Gender mainstreaming has been an internationally dominant policy since the mid 1990?s. In 2004, the Swedish government decided to implement gender mainstreaming within the Government Offices of Sweden. However, little research seems to have focused on the reasons for an organization's decision to implement gender mainstreaming. Consequently, the purpose of this study is to answer the question why the Government Offices of Sweden have decided to use gender mainstreaming.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

Den här rapporten beskriver ett examensarbete för högskoleingenjörsexamen i datorteknik vid Växjö universitet. Vid företaget BSR i Växjö pågår utvecklingen av ett diagnosverktyg benämt BSR Diagnostic Tool. Syftet med projektet är att kunna använda en hårdvaruklass som kommunikationsdel istället för diagnosverktyg från de olika biltillverkarna. Inom objektorienterad programmering är en klass ett avsnitt programkod som samlar en mängd relaterade attributer och funktioner för ett objekt. I rapporten beskrivs implementeringen av hårdvaruklassen samt tillhörande teori för kommunikationsbussen som används, nämligen CAN.

The content of this essay is the critical treatment of ritual research in Uppåkra during the Iron Age in relation to Charlotte Fabechs research.From what has been concluded for Uppåkra a condensed chart of Uppåkra's rituals is produced. This chart is compared with what Fabech has put forward for Southern Scandinavia. Fabech's categories and theory have been widely used by the researchers of Uppåkra, and this is critically examined.The most important conclusion is that the similarities between the Uppåkra research and Fabech picture are not great. This source critical point indicates that the massive use of her research in order to explain the rituals in Uppåkra can have been misdirected. The mismatch is mainly due to the fact that places like Uppåkra is of extraordinary character..

Public participation is a key aspect in the planning of Swedish municipalities. It is probably the most important tool of them all in the planning towards a sustainable future within the cities and the municipalities as a whole. Participation from the public can take on several different forms. In this paper I focus to research and discuss in and around the usage of a web-based 3D platform called City Planner. The tool allows the user (the public) to view the municipalities planning in a fairly new (but quickly growing) environment.

In today?s society more and more activities are digitalized. This means that everyone has to be able to use information and communication tools (ICT) in order to take part in the digital world, otherwise they will be left out of the digital community. There is a so called digital gap between for instance elderly and young people, where elderly do not know how to use the tools and there for cannot gain access to the digital society. What happens when people, not only grow old, but also have a communication disorder, such as aphasia? How are they included? The purpose of this study is to investigate whether or not surf pads are good tools for bridging the digital gap for people with aphasia, and which activities and situations that encourages people with aphasia to work with the surf pad.

ABSTRACT Title:                                                Retargeting- When display advertising builds                 loyalty Authors:                                           Mikaela Johansson och Anna Svensson Kjällberg Advisor:                                           Thomas Helgesson Level:                                               Bachelor´s in thesis in Marketing, (15 Swedish       credits) Spring 2014. Keywords:                                        Retargeting, branding Question:                                                    In branding, how should small e-enterprises            work with retargeting? Purpose:                                           The purpose with this essay was to identify how    retargeting should be used in small e-enterprises                             when branding. This was done by comparing two e-enterprises practical use of retargeting, with two                           brand consultants and two retargeting consultants theoretical knowledge within each expertise.   Method:                                            A qualitative method with a deductive approach    has been used to answer the problem statement.  Theoretical framework:                              Earlier theories about retargeting, brand building    and recommended practices, related to marketing                       on the internet, were presented in the frame of       reference. Empirical framework:                                 Primary data were presented by two respondents   representing each area: Companies, Retargeting                        consultants and Brand consultants.Conclusion:                                                   The          marketing tool allows companies and      their               brands to get the chance to appear in                        wide area                      networks on the internet.    The tool is primary used                                                                for a sales                      purpose but the tool also has potential in brand-                                                                       building purposes.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

To make wave power more competitive on the market Uppsala University leads projects that examine how to accomplish better efficiency in the production. One of these projects is described in this report and examines whether it is possible to make the production of dovetails more efficient by using an industry robot of type ABB IRB6000 S3 M91. This project is using an already presented working method, from a previous project, which involves that the robot picks up the dovetail and moves against fixed cutting machines where the dovetail will be drilled, threaded and milled. Drilling and threading are the sub operations that will be examined in this project where experiments are made with the presented working method and with equipment from Uppsala University.Experiments show whether it is possible to drill the holes in the dovetail within specifications by using the specific robot and the presented working method. The threading operation is examined theoretically if it is possible to accomplish by using the same working method.

The purpose of this study is to investigate how power is distributed in the mathematics classroom and how students achieve agency when ICT (Information and communication technology) is used as a teaching tool. Three learning situations, structured by mathematics, are analysed: in the first situation mathematics is taught in a traditional way, in the second mathematics is taught in interdisciplinary projects, and in the third mathematics is taught using ICT as a pedagogical tool. The theoretical concepts of power and agency are used as analytical tools within a socio-political framework. The concept of power is used to assess the students? ability to influence their learning and degree of inclusion in the three learning situations.

In April 2010 Vägverket (the Swedish National Road Agency) andBanverket (the Swedish National Railway Agency) will merge intoTrafikverket (the Swedish National Traffic Agency). Trafikverket willassume unified responsibility for the risk management that atpresent is responsibility of Vägverket and Banverket separately. Atpresent, as it will be shown in this thesis, Vägverket and Banverketshare the same theoretical background for risk management but usedifferent implementations often within the same agency. The use ofdifferent implementations results in a reduced transparency of therisk management both within and outside the agencies: this willbecome even more problematic when they will be fused intoTrafikverket.The aim of this thesis is to review the current risk managementmethodologies used at Vägverket and Banverket and to suggest aunified tool for the risk management at Trafikverket. This will bedone by focusing in particular on construction projects, one fromVägverket (Partihallsförbindelsen) and one from Banverket(Nynäsbanan).

Bakgrund: Smärta är för intensivvårdspatienten en unik, subjektiv, obehaglig och flerdimensionell upplevelse. Intensivvårdssjuksköterskan har ett moraliskt ansvar att lindra patienternas smärta. Verbalt icke-kommunicerandepatienter kan inte skatta sin smärta med hjälp av Numeric Rating Scale (NRS). På en neurointensivvårdsavdelning (NIVA) i Stockholm har det beteendebaserade smärtskattningsverktyget- the Critical-Care Pain Observation Tool (CPOT), implementerats. Intensivvårdssjuksköterskorna på NIVA använder CPOT dagligen i sitt arbete.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

The purpose of the study is to highlight educators' preferences and attitudes towards tablet in preschool by describing the use of this digital tool in the preschool educational activities. The use of tablet in preschool is in the study looked upon as a phenomenon. The description of the phenomenon is built on the analysis and interpretation of educators' statements about it. The research questions focus on the following aspects: educators' attitudes towards the tablet and its use in pre-school educational activities, the tablet's current area of use, the culture surrounding the use of this digital tool and the educators? statements about advantages and disadvantages of tablet's use in preschool.

In this essay I have chosen to take a closer look at gold figure foils (Swedish ?guldgubbar?), find their context and analyze it. I have analyzed some earlier studies about gold figure foils that were found in Scandinavia.The focus of my study is based on the locations of the findings. Another important aspect is to discuss if the encountered gold figure foils that were folded and cut looked like that due to intentional motives or not.My conclusion is that when it comes to the locations of the findings they are mostly found in houses irrespective of if it´s in a posthole, wall or house foundation.The other conclusion is that the gold figure foils could have intentionally been manipulated before they ended up in the ground..