This thesis uses critical discourse analysis to examine how the English-speaking press in Hong Kong constructs the conflict between the political movement Occupy Central and the Chinese central government. The empirical material consists of ten articles from the region?s two largest English-speaking newspapers, Hong Kong?s oldest newspaper, the South China Morning Post, and China?s only national English-speaking newspaper, the China Daily. Building on the works of Teun van Dijk, Norman Fairclough, Ruth Wodak and John E. Richardson it examines what political ideologies that are favoured by the press and what attitude the press shows for democratic development.

A large number of genocides have taken place in our history. The purpose of this essay is to examine how genocide is treated in five high school history textbooks. I have studied a large number of issues. I have examined which genocides are discussed in the textbooks and which genocides the textbooks don?t discuss.

Every year many individuals became sick listed, it could be for a long time, or a short time but irrespective there will beeffects on the individuals life and on the society. The aim of this study was to describe some relevant psychosocial relationships in the workplace that effect that women become sick listed. The method of the study was a literary study which was based on a number of scientific articles. The result of the study showed that many different factors effects the risk of becoming sick listed. Factors that causes sick leave where many and individual, but lack of social support, bullying, unstructured work environment and theworkplaces management, imbalance between demands and control and the women's situation were factors that had a big influence.

After contacting the company Elite Group Sverige AB, who sells strollers under the brand Crescent Baby, it was determined that the project group were to develop a three wheeled stroller which was going to be Crescents first own developed stroller. Only the frame of the stroller was considered within the demarcation of this project however care was taken to the placement of the carry-cot and the wheels etc. Crescent Baby wished for the frame would be smaller than the competitor Urban Jungle, that the frame would have at least three unique selling points and that the number of unique parts was to be minimized. The work began with information seeking regarding strollers, competitors, independent tests, European standards and consumer interviews. After that a number of concepts were developed and past to Crescent.

Every day we make numerous decisions. Some are better than others. Intuitive decisions usually results in less good decisions when we do not reason about our choices. Research has been interested about the process that is behind how we make good decisions. Decisions we face every day, such as when we shop, determined using various mental shortcuts that we use unconsciously.

In this thesis a number of energy saving methods for a multiplier on algorithmic level are investigated. For the investigation a multiplier is constructed in VHDL, after which the circuit's performance is investigated. A number of techniques for reduced power consumption are introduced in the circuit and are then evaluated. The conclusions are that all investigated methods, pipelining, interleaving and voltage scaling, should be maximally made use of in order to minimize the power consumption..

Botanist Kjell-Arne Olsson inventoried the plant fen ragwort Senecio paludosus 1983 in Scania andfound a big number of locations within Biosphere Reserve Kristianstad Vattenrike. In 2012, a reinventoryof the 1983 survey was carried out to study whether there has been any change in the fenragwort population in Kristianstad Vattenrike since the last inventory. The results show that therehas been no overall change in the number of fen ragwort in Kristianstad Vattenrike, on certainpremises they have increased in number while in others they have fallen. However, the inventoryshows that almost half of the locations with fen ragwort have disappeared during the same period.The main reason for this is that fen ragwort did not manage to competitive with other vegetation,taking in consideration this has been smaller premises with young plants. In addition to competitionother factors such as prolonged high water, grazing and caterpillars from Tyria jacobaeaecontributed to the decrease.

During 2006 an estimated number of 150 persons are supposed to have been killed in road accidents caused by speed limit violations. Through Automatic traffic security control (ATK) the Swedish road administration (Vägverket) is working towards lowering the number of speed related accidents. By placing the speed cameras on roads they've managed to lower the average speed at those places. The enlargement of the number of speed cameras is based upon knowledge about for example how high the risk is for speed related accidents on the roads. The speed cameras always measure the speed in which every vehicle passes, but aren't constantly activated to register speed violations.

This Master Thesis is a product development project that has been carried out in cooperation with Scania CV AB. The purpose has been to find the relationship between geometric parameters and the swirl number for an XPI- cylinder head in order to improve the design specification.The increased focus on environmental issues from society leads to tighter emission legislations for the truck manufactures. In order to drive the development forward considerable resources are spent on research and development on diesel engines and its combustion process. The inlet air has a significant impact on the formation of emissions and the flow that is desired is called swirl. Swirl is achieved by making the air rotate around the vertical axis of the cylinder.Earlier cylinder heads that has been developed at Scania CV AB have shown clear relationships between geometric parameters of the cylinder head and the swirl number.

The purpose of this study was to find out if motion movements, e.g. number of lying bouts and lying time with a registered activity monitoring sensor can detect an impending calving and thereby be used as a measure and an indicator for an upcoming calving. For this, automatically step sensors were used and were attached to one of the cows? hind leg. The sensor registered the individual step and movement activity of the cow.

Several studies have investigated the relationship between different measures of innovative activity, such as patent statistics and R&D expenditures and some have looked deeper into the differences between large and small firms regarding number of patents issued per employee or per R&D dollar. In this paper, the objective is to find out if there are any indications of a barrier to entry (due to economical factors, lack of knowledge etc) for small firms to get into the field of patent handling. The approach is to first set up a hypothesis based on some simple assumptions about how firms would make decisions about whether to apply for a patent or not and thereafter use econometric methods in an empirical investigation. The data used for this study are figures on number of employees, number of patents granted and R&D expenditures for the Swedish firms in the pulp and paper industry. The main conclusion is that, based on the analysis of the data from this rather limited group of firms, no such barrier can be seen..

In 1993 Sweden introduced a new Forest policy, with a larger freedom of action for the forest owners, but in the same time the forest owners are expected to take greater consideration of the forests and the environment, that is required by the law. This is necessary to be able to obtain the goals of the new policy. Therefore the demand for competence and guidance is larger than before. At the same period of time organisations where slimmed and trimmed during a economic recession and the question is how this has affected the number of employees on different levels in the organisations, the competence of the employees and their internal education and if these changes affects the possibility of implementing the forest policy. This study contains three points in time where measures were made, 1990, 1995 and 2000.

The number of residential fires has not declined sufficiently since the smoke alarm entranced the Swedish homes, fires lead to devastating consequences in which possessions, homes and worst of all human lives are at stake. Every year, about 80 people get killed and more than 500 get´s injured in residential fires, often due to lack of safety equipment. The number of fires caused by electrical appliances has risen and taken over a period of ten years the fire caused by a forgotten stove has increased by 70 percent. Preventing the risk that a fire would start on the stove would saves money, worry and most importantly, lives..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..