By using univariate analysis, tobit and logit regressions, this thesis investigates determinants of asset writedowns. After controlling for variables indicating reductions in asset values, the results show that changes in senior management are significant in explaining the writedown decision and magnitude, which is in line with previous research. The explanatory power of changes in senior management has not increased with the transition to IFRS in 2005. No evidence is found supporting the hypothesis that the explanatory power of management incentives is higher for more discretionary types of asset writedowns..

The purpose of this paper is for the reader to realise how national innovation systems are deeply intertwined with the legal background of a country and to understand the processes that involves national innovation systems specifically regarding the stem cell / genetics research and how the need for specific community law must be considered targeting the stem cell patents. The legal part will try to answer: Why is it important given the actual state of the European stem cell national innovation systems for the European Commission to take a stand and tackle issues regarding the patenting of the human stem cell innovations? This is done from a country industry analysis (business approach) and then linking it with competition law from a community stand point of view (that tackles biotechnology issues). In order to achieve this the paper is divided into three separate analyses beginning with a theoretical background of general biotechnology / genetic terms that will enable the reader to have a general understanding of the importance of this kind or research ( genetics / stem cell research). The chosen countries case studies exemplify very diverse economies and development perspective from the traditionally R&D intensive to the least and from the biggest countries in Europe to one of the smallest, thus giving cultural, legal, economic and scientific variety..

More frequent and intensified rainfalls are expected to occur due to climate change in the nearfuture. This together with a higher proportion of paved areas increases the pressure on today?sstorm water systems (Risinger, 2014; Boverket, 2013; Stahre, 2006). Traditional storm watersystems (i.e. underground pipe systems) have during last decades started to be questioned(Olshammar & Baresel, 2012).

The purpose with this project is to explore and verify three renovating systems for Miljonprogrammet (common expression forbuildings constructed during the years 1965-1975 when over a million houses where built in Sweden) to take measure to thelargely transmission losses of these buildings. Many of the buildings from this period have similar constructions and thereforethe same techniques can be used to renovate several of them. This project only considers the climate scale, although thereare many more factors to concern for to efficient the buildings of Miljonprogrammet.This thesis presents examples of renovations carried out using two of the three renovation systems.The essay presents a reference house of choice on which we apply the three systems and calculate the new U-values,consumption of energy and the investment costs. The new U-values the building is given is matched to the values ofrecommendation for passive houses. Our reference house is a two story apartment building, located in the village ofLammhult, with brick facades at the ends and plaster at the long sides.

In the last couple of decades, corporate law firms have rapidly grown to become both influential and highly profitable corporations in the business world. Today, the largest law firms are assumed to bear far greater resemblance to large and often multinational public limited companies than the small businesses generally associated with legal services. However, one interesting specific set them apart from the majority of other companies; the partnership and its interrelated profit sharing. The aim of this study has therefore been to investigate partner compensation systems in corporate law firms and further examine what implications chosen compensation systems have on the organizations. Using a multiple case study, including 7 of Scandinavia?s largest and most well known law firms, the results show that partner compensation systems are highly individual and the critical question is whether to employ seniority based or performance based compensation systems.

Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.

In today?s society a large focus is put on energy systems and how our energy systems are built up. In order to make sure that we in the future still can enjoy the living standards that we are used to today, Sweden and EU have made a number of decisions on making our energy system more energy efficient and consequently reduce the usage of energy resources. By 2020 the European Union should have reduced its energy consumption by 20 % compared to 1990?s level, and by 2050, 50%.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

The aim of this study is to investigate which management control mechanisms evolve in companies that receive funding from Venture Capital companies and why the management control systems evolve in the way that they do. A case study was performed on three Swedish high technology companies, that all received funding from Venture Capital companies for the first time in 2006. Merchant?s framework, defining all management control mechanisms as either, results control, action control or personnel control, was used to structure the study. Results show that the companies that received Venture Capital all increased the use of management control mechanisms within results control, action control and personnel control.

The world is changing and the business context is no exception. One of the clearest tendencies is a tougher business climate with harder competition due to increased international trade and the expansion of the e-business. At the same time the customers are becoming more sophisticated and demanding. The last decades have also meant that tougher and more frequent demands are being aimed at the businesses from a wider variety of stakeholders; demands regarding how environmental issues, social responsibilities and business ethics should be dealt with. All of the above have driven companies towards implementation of different management systems to be able to cope with the demands as well as to ensure that these issues are being dealt with in an efficient and effective manner.

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

Today most ice rinks in Sweden use secondary refrigeration systems with a solution of calcium chloride and water as secondary refrigerant. Due to the large amount of energy such a system uses more efficient systems would be desired.An earlier study concluded in the possibilities of using carbon dioxide as secondary refrigerant with copper tubes as the loops in the ice rink. Since then 3 ice rink refrigeration systems has been built with carbon dioxide in copper tubes. Excluding the ones being direct involved in those projects there is still very little knowledge about how these system works. This study has been made primarily with the aim of adding to the knowledge concerning availability and cost and secondary to look at possibilities for improvement.A comparison between systems with carbon dioxide, calcium chloride respective ammonium solved in water has been made by using Decision Matrix.

Syfte med uppsatsen är att skapa en ökad förståelse för belöningssystem och dess funktioner, samt undersöka om dessa motiverar personalen till att sträva efter samma mål som företaget. I vår slutsats har vi kommit fram till att Elgiganten och ONOFF använder sig av väl fungerande belöningssystem. I studien kom vi fram till att både de anställda och litteraturen pekar på att det är de icke-finansiella faktorerna som motiverar mest. Därmed borde de utveckla de icke-finansiella belöningarna vidare för att nå högre motivation och högre effektivitet inom verksamheten. Vi har även kommit fram till att det inte är belöningssystemet i sig utan det är känslan som personalen känner när de uppnår en belöning som motiverar mest.   .

Syfte: Syftet med denna uppsats är att ur ett ledningsperspektiv undersöka vilka belöningssystem småsom gare nämnde nämnde prestation. hur vi kommer in på just ett belöningssystem som främjar. lvis kopplingen emellan prestation företag använder och jämföra detta med företagens tillväxt och de anställdas prestation.Metod: Metoden använder en tvärsnittsdesign med induktiv karaktär. Primärdata består av kvalitativa intervjuer som kombineras med en kvantitativ enkätundersökning ur ett  företagsledarperspektiv. Urvalet baseras på företagens storlek, år de grundades samt  bransch.TeoriUppsatsskribenterna avser att använda agentteorin, Hertzbergs tvåfaktorteori, teorier kring belöningssystem och motivationsteorier som uppsatsen teoretisk ramverk.Resultat: Resultatet visar att fast lön och prestationsbelöningar är mest använt.