This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

Outsourcing means to contract out work previously done within the cooperation to a supplier.This is an increasing trend today. Traditionally companies have outsourced manufacturing butwith the growing specialization they tend to outsource other activities as well.China?s economical reforms and entrance into the World Trade Organization, WTO, hasenabled international business connections. Since China offers one of the cheapest labours inthe world, many companies have an interest in starting up an activity in the country. Themany foreign investments in China have lead to an economical growth which in turn hasmade it possible for China to invest in the Chinese competence and innovative capacity.The commissioner of this master thesis, SMS, is one of the leading actors in retrieval ofamong other things mounts and stands for flat screens and projectors.

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

So far, only limited research has been carried out on viruses infecting raspberry, even though the diseases that these viruses cause result in economical losses for raspberry growers. Raspberry ringspot virus (RpRSV) belongs to the family Comoviridae and the genus Nepovirus. Nepoviruses are characterized by their icosahedral virus particles and bipartite genome of single-stranded (+) RNA (RNA-1 and RNA-2). These viruses are transmitted mainly by nematodes of the genus Longidorus, which feed on the roots of plants. RpRSV causes disease in raspberry, grapevine, strawberry and many other plants.

During the last few years the presence of high arsenic (As) concentrations in ground water has been of major concern both internationally and in Sweden. Much evidence has been reported about toxic effects caused by arsenic. The carcinogenic effects and the possibility to measure the toxic impacts at low concentrations made the World Health Organisation (WHO) to reduce the guideline value from 50 to 10 ?g l-1 in 1993. In Sweden the corresponding reduction was implemented in 2003. Several surveys in Sweden have shown that high arsenic concentrations may occur in ground water.

This project concerns a new lower and mid level compulsory school in the currently developing area of Annedal, northwest of central Stockholm. According to the given program, the school should hold 500 pupils and 100 pre-school children. As an addition to the given program, my suggustion holds a sports hall and a public library.In my project, my ambition has been to investigate how to create an inspiring and exiting place for kids to inhabit and, at the same time, create an activated, central place in a developing suburb. The latter has resulted in the two program-related additions, which purposes is to extend the hours during which the area is activated and to create additional incitements for visiting the building. Both additions are chosen based on lack of service in the area. Architectually, I've been inspired by the medieval castle which has been used as an inspirational resource for the parts of the school holding classrooms.

The aim of this study was to examine what impact restored and constructed pounds and wetlands have on waterfowls in the area of Linköping. The birdlife in five constructed wetlands werechosen to investigate if specific factors like age, size and vegetation affected the avian diversity in wetlands. Also, extra focus has been given to the threatened Horned Grebe (Podiceps Auritus), breeding in the studied area. The results showed that the number of species as well as individuals of waterfowl and Horned Grebe changed over time in what might be a result of succession in the wetlands. Comparing the number of birds to the size of the wetlands showed a clear correlation. Larger areas inhabited greater numbers of species and individuals.

Det första intrycket av en produkt är mycket viktigt, därför har förpackningar en stor betydelse för kunder i beslutsprocessen vid val av produkt. När det gäller mejeriförpackningar är ofta innehållet det samma, oavsett om mjölken kommer från Milko, Arla eller Skånemejerier är innehållet mjölk. Det är förpackningen som särskiljer produkten från olika varumärken genom att sätta sin identitet på den. Vi ska därför genom denna uppsats undersöka vilka kvalitetsattribut hos mejeriförpackningar som bör prioriteras för att uppnå kundtillfredsställelse. Detta ska vi undersöka genom att använda oss av teorin om attraktiv kvalitet, hedonistisk kontra funktionell nytta, kvalitetsattributs livscykler samt genom att dela in attribut i dimensioner.

I Sverige genomförs varje år offentliga upphandlingar till ett värde av ca 500 miljarder kronor. Alla offentligt finansierade verksamheter måste följa lagen om offentlig upphandling och den formella upphandlingsprocess som lagen specificerar. Lagen är allmänt formulerad och anvisar en process där fokus ligger på förarbete och matematisk utvärdering.Cognitive Systems Engineering har vuxit fram utifrån insikten att effektiva processer kontinuerligt behöver använda såväl feedback och feedforward för att uppnå sina mål. Typiska tillämpningar är dynamiska, tätt kopplade processer där dessa behov är tydliga, men CSE som ramverk är generellt definierat och bör gälla även för en beslutsprocess på organisationsnivå. En CSE-analys har potential att förtydliga funktionella faktorer som tillåter upphandlare att genomföra effektiva och ändamålsenliga upphandlingar.I syftet att testa ovanstående hypotes genomfördes en fallstudie av Linköpings Universitets upphandling av företagshälsovård 2008.

This Master thesis has been carried out at Scania CV AB in Södertälje, in collaboration withKTH, The Royal Institute of Technology, Stockholm. The focus of this Master thesis isSetBased Concurrent Engineering(SBCE), with the purpose of answering the questions: what isSBCE, how does it work, and for what purposes is it applied.It was early established thatSBCE is often included as a part of Lean product development,which in its turn is often related to Toyota?s way of working. TheSBCE method includesworking with multiple solutions in parallel, eliminating weak alternatives throughout thewhole process. In opposite to a conventional product development process, where it iscommon one at an early stage tries to identify and choose the most promising alternative.Despite the appearance ofSBCE as a resource consuming method, figures from Toyotaindicates the opposite, thatSBCE is in fact a very effective way of working compared to othermore traditional methods.The process of this Master thesis was divided into three phases.

Detta examensarbete har utförts vid Duroc Engineering AB i Luleå. Duroc Engineering är Sveriges ledande företag inom laserförädling av metalliska ytor och levererar tjänster och produkter till framförallt gruv-, stål-, flyg- samt verkstadsindustrin. Rostervagnar transporterar kulor som används vid sintringen i Malmberget vid LKAB:s kulsinterverk. Genom att vagnarna passerar genom olika värmezoner sintras kulorna och vagnarna töms därefter för att hämta upp nya kulor. Detta pågår dygnet runt, året om, vilket medför stort slitage på vagnshjulen.

VSEM project and the need for a more efficient way of handling requirements andinformation are highly apparent.The overall objective of this thesis is divided into two parts:1. To identify criteria/factors leading to a successful introduction of an informationmanagement system.2. To develop an implementation process for a requirement management system ?the first step towards a PLM system in EE development at VCC.This will be done through interviews with employees, a literature review and an analysisof studies of three earlier projects within VCC.The conclusion of this study shows the great need for change in work methods fordesigners handling information and requirements. An implementation process has beenidentified with guidelines on how to handle different phases of the process.

The purpose of this thesis is to examine the networks of interlocking directors in the 50 largestSwedish companies on the Stockholm Stock Exchange during the years 1990, 1995, 2000, 2005and 2010 and seek explanations for the observed developments.Our findings indicate that the density and concentration of the network has decreased during thefirst ten-year period and stayed constant during the second period. The development of theoverall network is not consistent throughout all corporate groups. Most notablyHandelsbankssfären seems to experience increased density and connectivity whileWallenbergsfären is experiencing the reverse.The changes during the first ten-year period is deemed to come mainly from changes inregulations pertaining to both the opening for international capital investments as well as looserrestrictions on domestic capital investments. These changes have caused decreased concentrationof ownership, as well as the emergence of new owners, which is reflected in the board ofdirectors.During the second ten-year period the changes are more pertaining to the individual boards andboard members, without flowing through into the overall network. Our findings indicate thatthese changes are caused by the increased professionalization of boards and board work, whichhas gained momentum through the creation of the Swedish Corporate Governance Code..