This project operate an environmental assessment of total waste was conducted by using a life cycle assessment (LCA), that examines the environmental benefits of recycling production waste from Atlas Copco at Stena recycling. Atlas Copco is a company engaged in the development and production of rig-mounted hydraulic breakers and handheld air breakers and handheld motorized rotisserie. Stena recycling is a recycling company engaged in recycling, processing and refining of metals, paper, electronics waste and hazardous waste.The purpose of this study is to focus on Stena customer Atlas Copco and evaluate environmental benefits between to recycle and not to do it. The Result shows that the total energy gain, Resulting from the recycling of waste fractions, lands at 6 990 089 MJ, corresponding to drive 3 times around the Equator with a truck (40 t). The Result shows that recycling 3040 kg paper provides an energy gain of (38 600 MJ) compared with burning paper (19 500 MJ) is 19 100 MJ, which corresponds to heat a house for 11 weeks.

ABSTRACTThe aim of the study was to examine the prevalence and the location as well as the registration of gingival recessions among patients between 20-29 years of age, who are treated on the Dental Hygienist Programme at the University of Kristianstad. The study was performed as a recording study, where the first page of the base record paper was examined. We examined 295 base records. The Result showed that gingival recessions only were registered on 3 % (n=10). Most of the injuries, 53 % (n=157), had been registered as toothbrush trauma.

The purpose with this thesis is to investigate how the logistic and the configuration of the terminal buildings and the perceptions of the passengers at Stockholm Arlanda Airport are related to each other, and what effect it has on the passengers and their traveling within the airport.The focus will be on the logistic at all four terminal buildings that is within the Airport. To create a perception of the logistic at the Airport and how it is related to the passengers perceptions, the investigators need to make knowledge of the terminal buildings, and thereby try to link the logistic with the perception of the experience room.Swedavia is the company that own, operate at and manage Stockholm Arlanda Airport. The investigators will make an interview with employees at Swedavia to get a more profound understanding of how the company is thinking about the logistic issues that they need to overlook. There will also be interviews with travelers to get their perception of the logistic, design and atmosphere at the Airport.Observations will also be made at various times at the Airport with focus on all of the terminal buildings. The investigators use qualitative and quantitative methods to reach a Result. To achieve a Result, the investigators will use theories and scientific facts and other available facts that will be helpful to reach a Result that will be analyzed..

To become old and live in an institution could mean that the habits and routines they have obtained during their lifetime and are used to may become changed. There are fixed norms and rules which the elderly more or less have to adjust to. The aim of this study was to describe how nursing staff attitudes influence on elderly care takers meal situation. The method of this study was a literature review. The Result showed that norms and rules not always are adjusted to caretakers? wishes and needs.

The aim of this study was to describe and analyze if and in that case how project Speaking English contributes to improved skills in English to pupils in reading and writing difficulties. The project started out in order to give pupils in reading and writing difficulties an alternative to the regular English teaching. The study was carried out in two nine-year compulsory schools. We have conducted interviews with both teachers and pupils to see what they think about the project. According to the teachers we interviewed Speaking English contribute to improved skills for the pupils and they also believe that their chances to pass the 9th grade will increase.

 The purpose of my study is to illumine the aesthetic learning process significant in the preschool. Focus has been on allowing educators in different preschools to answer questions valid the use of aesthetic learning processes. I chose to do my study using an opinion poll and a literature review. The Result shows that the preschools use aesthetic learning processes and according to the educator?s aesthetic learning process is a very important tool for education in the preschool.  The notable in this study is that the educators have different views of what aesthetic means. The first view is that you only work with aesthetic subjects.

With starting point in the increasing ill-health in Swedish working life today, in form of for example absence due to sickness and early retirement pension, and the knowledge that the working environment effects peoples health in a big extent, I found it very interesting to inquire into how people within the working life experience health promotion and how this can be developed. A qualitative method was used to receive a deeper understanding for the employees? experiences and data was collected through semi structured interviews with employees on a bank called Ikanobanken, in Älmhult. The Result shows, among other things, that respondents find responsibility and the opportunity to influence the learning processes and development important. It also became clear that the respondents find participation, motivation, communication and safety essential factors when related to changes in health behaviours.

To become old and live in an institution could mean that the habits and routines they have obtained during their lifetime and are used to may become changed. There are fixed norms and rules which the elderly more or less have to adjust to. The aim of this study was to describe how nursing staff attitudes influence on elderly care takers meal situation. The method of this study was a literature review. The Result showed that norms and rules not always are adjusted to caretakers? wishes and needs.

The purpose of this degree project is to study a work evaluation project in a municipality, on the basis of key participants. The municipality is the employer, per-forming the workplace project and the chief objective is to reach gender equality between the employees. Equal pay for equal work. Through work evaluation is it pos-sible to find out which of a lot of different jobs, which have equal requirements. The jobs, which have equal requirements, should have equal pay.

This paper will answer which factors are important for the business relation between a small Swedish import company and a Chinese contractor. The problem is based partly in theories that points to cultural and organizational differences between Sweden and China, and partly in current examples from Swedish companies. The relevant data has been collected by interviews with three small Swedish companies that are currently using Chinese contractors.The Result is that the differences between the countries and organizations exist, but that they do not interfere with the inter-company relations. The conclusion is that our Result contradictsthe established theories in the field, and that a more comprehensive investigation is warranted..

Young people may be socially and psychologically strained due to unemployment. In the long run, it could Result in learned helplessness, which is, according to Seligman (1993), a psychological condition with similar symptoms to the ones that occur during depression. The condition develops when an individual experiences negative events and, after various unsuccessful attempts to escape or conquer them, the individual finally believes that there is no relation between behavior and consequences. The Result is often that the person gives in, or stops, making an effort when new difficult situations occur. Kalix UniverCity runs the project called KUBIK in the communities of Kalix and Överkalix.

The aim of this meta-study is to present an overview of the methods used in Master theses written at The Swedish School of Library and Information Science at the University of Borås, where all Master theses from 1999, 2004, and 2009 has been studied. The aim includes examining if there is a connection between college (Swedish term: kollegium) belonging and methods used but also to examine and compare the qualitative and/or quantitative approaches to the methods. In the 252 Master theses studied, 353 different choices of method are recognized. After taking note of the methods, six categories are created in which the methods are placed. The categories are: Interview, IR-test, Observation, Studies of Text, Survey, and Other.

The purpose of our study is to examine whether stress among social workers is present, and ifso, what strategies they and their supervisors use to manage work-related stress. The study isbased on a qualitative method. The data consist of interviews, with six social workers andthree supervisors. The study?s theoretical framework is based on KASAM, SOC-sense ofcoherence by Antonovsky, demand- control- support model by Karasek & Theorell, stresstheory by Hans Selye and coping strategies by Lazarus.

The purpose of this study was to review a group of youths in a municipality which all had committed criminal acts. The study is based on 66 youths between the ages of 13 and 20 that were all matters for the social services. The social inquiries of the youths where reviewed using a quantitative method. Their backgrounds where examined to identify what type of risk factors they had and what type of crimes they had committed with an aim to detect if there were a relationship between the risk factors and the art of the crime. The Result of the study showed that the majority had committed crimes against another person and the risk factors included family related factors and school problems.

High-precision cutting in metal is very complicated, a lot of parameters affect the Result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.