Every year 67000 tons of food is wasted by Swedish retail stores. The waste implies financial losses for the retailer and it has a huge impact on the global environment. Reducing in-store food waste is thus a win-win situation for both retailers and society. The most effective way to reduce waste is primarily by optimizing the logistics of supply, but customers expect a store with a wide range of products and stuffed shelves. Thus there will always be products about to expire.

This thesis has identified and studied measures to allow for reduced use of electricity in a waste incineration plant in western Sweden. The energy extracted from the waste at the powerplant is utilized and sold in form of electricity and heat. Technical and environmentally the combined heat and power plant is by today's standards among the leading waste incineration plants in the world. The owners are constantly striving to improve the efficiency of the waste incineration plant. They have seen the opportunities for savings in reducing internal usage of electricity.

Att utforma en framga?ngsrik och vinstgivande restaurangmeny kra?ver sa?va?l kunskap som erfarenhet inom restaurangbranschen. Spra?kbruket utgo?r en viktig del i skapandet av en meny. Denna studie underso?ker hur 60 restauranger anva?nder sig av formord och inneha?llsord med hja?lp av data fra?n ett egenha?ndligt sammansta?llt s.k.

A variety of food is produced and passes the whole chain by processing, transport and trade and finally it ends up with the consumer. But in many cases, the food is disposed before it is eaten. Some of the produced food does not even pass the whole entire chain before it turns to waste. The question about food waste in debates is a case of access to food for every human beeing. It is question of consumption of the resources, waste management and an issue of environmental impact.

The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

Storage of biomass is often associated with problems such as heat development, dry matter losses and reduction of fuel quality. The rise in temperature can potentially cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles can cause health problems in the surrounding. The dry matter losses and reduction of fuel quality can have economical effects. The aim of this thesis project is to develop guidelines on how to store large amount of biomass at Vattenfalls heat and power plants in an optimal way.

This master's theses was carried out on assignment from Stockholm Vatten AB as a part of a project developing new waste water treatment techniques. The goal of the theisis has been to evaluate an anaerobic membrane bioreactor for treatment of waste water from Hammarby Sjöstad. The bioreactor has not been heated and the main interest has been to study the gas production, power consumption and the reduction of organic matter and nutrients.The system has been completed with a reverse osmosis unit and a total of four batch runs have been made with good results. The use of reverse osmosis allows nutrient in the waste water to be reintroduced into circulation as the reverse osmosis concentrate can be used as crop nutrient.The membrane unit is of VSEP ("Vibratory Shear Enhanced Processing") type and an extensive membrane test has been conducted. This so called L-test helped determine the most suitable type of membrane for the system to allow a higher ±ux and thus lower power consumption.

Today, the management concept of lean has stretched far from its origins in the Japanese automobile industry. When reaching the Swedish restaurant industry, the conditions for a successful implementation of lean change as a result of the high employee turnover and the significant amount of part-time employees characteristic for the industry. Combined with a high-end service profile, these workforce characteristics seem inconsistent with some of the basic principles of lean. By conducting a case study, this thesis aims to investigate the effects of a variable workforce on the enablers for a successful implementation of lean in a high-end service industry. Using a theoretical framework consisting of enablers for an implementation of lean in services, the study finds that the variable workforce inhibits an implementation of lean by complicating the effects of traditional training, as well as the possibility of understanding the lean concept at all levels of the organization.

This report was written by Lisa Bengtson and Hanna Paradis and describes the degree thesis "Environmental impacts of solid waste treatment in the Metropolitan Region, Santiago, Chile ? a comparison between current system and incineration with energy recovery". The purpose of this thesis was to investigate if incineration with energy recovery could be motivated through an environmental perspective as an alternative to landfilling of solid waste in Santiago, Chile. The study was performed with Life Cycle Analysis as a theoretical base. In Santiago, situated in the thirteenth region of Chile, Región Metropolitana, lives 6,5 million inhabitants. The major part of the solid waste produced in the region is landfilled on three different sanitary controlled landfills situated outside the city center.

All around the world more and more people move from rural areas to live in the cities. Because of this, the urban areas have become an important part in the debate about the effects on the environment and sustainability. In many countries word wide initiatives have been taken to build sustainable cities and eco cities, the Stockholm Royal Seaport is one example. The vision for the district is to become a world class sustainable city based on the three dimensions of sustainable development: social, economic and ecologic. The municipality of Stockholm has set requirements for the buildings? energy usage, emissions and amount of waste generated during the building process.

SAPA´s resource of waste heat is the basis for this thesis to investigate the possibility of energy assets in their cooling water and possible uses for it. The energy in the waste water is greater than the current need which has three uses which are (1) heating the factory, (2) converting liquid propane to propane gas and (3) local domestic heating. The average energy load that is available is 1, 7 MW and the average temperature in the cooling water is 41°C. The total energy load at dimensioning out side temperature is approximately 1,6 MW for the three current uses. The temperature is currently too low to be used directly in the existing systems so an upgrade is needed.

Hammarby Sjöstad is a new district in southern Stockholm. A main objective with the Sjöstad project was to halve the environmental impact compared to other construction work. The environmental goals involve a halved water consumption rate, a local treatment of storm water and trials aiming to extract nutrients from the waste water. Sjöstadsverket is an experimental treatment plant used for testing new treatment processes for domestic waste water from Hammarby Sjöstad. The results are to be compared with the conventional process used at Henrikdals treatment plant today.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

Titel: Waste Management ? Förbättringsförslag av återvinningsprocessen inom hemelektronikbranschen. Bakgrund: I en bransch som kännetecknas av snabb teknologisk utveckling är det viktigt att se till att de produkter som kommer ut på marknaden också tas om hand på ett bra sätt i slutet av sitt funktionella liv. Hur ser återvinningsprocessen hos företagen ut idag och vad kan göras för att minska de växande problem som framkommer i samband med den ökade konsumtionen? Genom att granska fenomenet Waste Management avser uppsatsen angripa slöseri i logistikflödet och finna förbättringar av dagens återvinningsprocess av uttjänta hemelektronikprodukter.

LKAB is an international high tech mineral corporation and a world leading manufacturer of refined ironore products for steal manufacturing and other mineral products destined other industries. LKAB is an international corporation with companies world wide, with it?s main location in the north of Sweden, which is where the iron ore mines and the refining works are located. LKAB?s iron refining process in Vitåfors, Malmberget, is a source of great amounts of waste-rock.