This study is based on a proposition about the legislation regarding sexual offences prepared by a commission initiated by the Swedish government in 1972 which was presented in 1976. The purpose of this study has been to ascertain the commissions views on rape based on their representation of the problem, their presuppositions and assumptions regarding it and future consequences in behavior for victims and offenders of the crime. The key results of this study is that the commission regarded the ?problem? of the then current legislation to be non-consistently with the time being. In their opinion the legislation needed to be loosened from its moral strings and be adjusted to the ?new? sexually liberal era.

This paper is a study of documentary film production with focus on the filmmakers choice and usage of sound equipment. Using professional articles and literature have first of all helped us determine a standard for the conventional use of sound equipment in documentary film. Afterwards, by analyzing our own interviews we?ve received answers on how filmmakers relate to the conventional usage and why they select equipment as they do. Thereafter, we describe a technical method which helps a filmmaker to be able to record sound for documentary film on his/her own, using simple measures without reducing quality.

The purpose of this thesis is to examine how the public libraries work towards SFI (Swedish For Immigrants) based on the views of the overseeing librarians. To study this we have asked the following research questions:What distinguishes the public libraries? work towards SFI according to the responsible librarians? What distinguishes the communication between SFI teachers and the librarians according to the responsible librarians? What opinions are held by the librarians in regards to their work with SFI?We have used a semi structured interview method with seven librarians in charge of the activities with SFI at small and medium sized public libraries in a rural area of Sweden. The theoretical framework is composed of Marianne Andersson and Dorte Skot-Hansen?s model for analysis of the local public library profile and the authors? definition of collaboration.

The use of fossil fuels such as coal and gas are a contributor to the global warming. The climate change is a worldwide problem with far reaching consequences that is believed to be very expensive. The United Nations has been introducing a framework convention on climate change. One component of the convention is the Kyoto protocol. The protocol is obligating the developed countries to decrease their emissions of greenhouse gases by 5.2 percent during the time period 2008-2012.

Seabased Industry AB develops system for extracting electrical energy from ocean waves with a Wave Energy Converter (WEC). The components is bought from subcontractors and then assembled into wave energy converters, buoys and marine substations by Seabased. In the future Seabased will produce more of the components themselves to reduce costs and to have better control over tolerances. The production line will also include the painting of the WECs and substations, which is performed in a painting line.The purpose of this thesis work is to study what is required to build a painting line, regarding the types of stations, transporting types and the space needed. This will result in layouts for the painting line.To receive the necessary information about production theory and corrosion and surface treatment, literature concerning this area has been studied.

The purpose of this study was to highlight cyber-bullying and its place in today?s schools. Our aim was to research how schools with bullying prevention programs are equipped to handle and take action against cyber-bullying. Furthermore this study focuses on whether or not schools are responsible for cases of cyber-bullying. We also aimed to present teachers? general views and knowledge regarding this phenomenon.

The Swedish industrial society has left several areas with contaminated soil and water which today is of danger for the environment and human health. One of these areas with contaminated soil and water is the region where the former Glava glassworks operated during 1859 to 1939. The main object in this study has been to study the responsibility for the contaminations according to the Environmental Code. The method used is a qualitative content analysis of relevant literature to answer the following questions:What types of contaminations can be found in the area of Glava glasswork and what health issues can these cause?What kind of activity has been conducted in the area that have caused the contaminations in soil and water?According to law, what are the responsibilities for the contaminations in soil and water at Glava glassworks?The contamination in the region has been confirmed to originate from the glasswork due to the environmental engineering survey made in the area in 2009.

Åmotfors Bruk AB (ÅBAB) has today an inefficient production of steam for the manufacturing of paper. Unpredictable energy prices and modernisation of the current equipment has been the underlying factors to invest in a thermal power plant, mainly driven by garbage. This facility will not only use the steam for paper production, it will also generate electricity through a steam turbine. Today, when a fault on the supplying line occurs which leads to disconnection of the external grid, all the support of electricity to Åmotfors Bruk (ÅB) will disappear. This will lead to major interruptions in the paper production, which will cause severe economical losses.

The Swedish production of biogas was 1,5 TWh 2011. About half of the production was used as vehicle fuels. The cost for upgrading biogas depends on the size of the biogas plant and its gas production. If the gas flow is low the cost will be high. However, further development of existing upgrading technologies or development of new ones, have good potential to decrease the upgrading cost for small scale biogas plants.

Abstract Title: A messy story ? a case study of Secorocs process flow of DTH-pipes Presentation date: 2010-06-02 Course: Bachelor thesis in businessAuthor: Kristoffer ForsmanAdvisor: Kjell GustafssonKeywords: Management control, process control, lean production, process flow analysisPurpose: The purpose of this bachelor thesis is to develop an overview of the process flow for a specific product, and with the help of this mapping based on a lean production philosophy show possible improvement proposals and how these can lead to a more efficient process flow.Methodology: I have used a case study of Secorocs DTH-pipes and my primary data are gathered through interviews and observations. I have used theoretical framework to establish a process flow analysis. This is to obtain data on process activities and whether they are creating value or not. This leads to a current mapping of the situation in Secoroc on DTH-pipes and then analyzed and suggestions for improvement are developed.Conclusions: That by using the above mentioned mapping of process flow of DTH-pipes, problem areas could be illustrated.

The purpose of this thesis is to examine how the public libraries work towards SFI (Swedish For Immigrants) based on the views of the overseeing librarians. To study this we have asked the following research questions:What distinguishes the public libraries? work towards SFI according to the responsible librarians? What distinguishes the communication between SFI teachers and the librarians according to the responsible librarians? What opinions are held by the librarians in regards to their work with SFI?We have used a semi structured interview method with seven librarians in charge of the activities with SFI at small and medium sized public libraries in a rural area of Sweden. The theoretical framework is composed of Marianne Andersson and Dorte Skot-Hansen?s model for analysis of the local public library profile and the authors? definition of collaboration.

High heels ? a fashion that has not gone out of style after hundreds of years. Despite their esthetic advantages, high heels become uncomfortable and harmful after repetitive and long term use. With this as a starting point, Huyen Nguyen ? a student at the Innovation Engineering Program at the University of Halmstad ? decided to make a final thesis project. The project goal has been to combine the esthetic advantages of high heels and bring a comfortable solution to the equation.

Detektion av gasläckor används i en mängd olika applikationer som till exempel kvalitetskontroll av kylskåp, lokalisering av skador på kablar och lokalisering av bränsleläckor i bränsletankar.Denna rapport undersöker förbättring av detektionsalgoritmen i en existerande vätgasdetektor.CUSUM algoritmen är en enkel men kraftfull metod för att snabbt detektera små ändringar i nivån av en signal. Denna metod är anpassad till det dynamiska beteendet i sensorn som används för att spåra vätgasläckorna och även utvärderad på omfattande mätningar utförda på läckor med kända storlekar. Resultaten visar att användning av den föreslagna detektionsalgoritmen innebär en betydande ökning av detektorns prestanda. Särskilt bra blir resultatet på små läckor..

Bakgrund: Lean Production uppkom som ett verktyg för att sänka kostnader och därmed öka konkurrenskraften på en allt mer hårdnad marknad. Synen på processtänkande och dess möjligheter har under senare årtionden ökat markant i intresse, däremot har ekonomisystemen inte förändrats i samma takt. Granlund (2001) menar att trots det starka trycket att förändra kalkyleringen använder många företag sig fortfarande av traditionella påläggskalkyler med direkt lön som fördelningsbas. Kaplan & Johnsson belyste redan 1987 problemet och argumenterade för hur traditionella kalkylsystem ger en allt för aggregerad och snedvrängd bild av verkligheten. Den debatt som uppstod är känd under namnet Relevance Lost.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.