Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

This paper presents the results from an osteological method study of the Ringsjöholm fishbone material. Ringsjöholm is located in Scania, southern Sweden and is 14C dated to 5960-5200 B.P. The aim of this paper is to critically analyse methods used on fish bone material in estimations of season. Three different approaches were used to estimate the fishing season at the Ringsjöholm settlement; 1) identified species, 2) size estimations of the pike based on Enghoffs (1994-95) regression formulae of os dentale, and 3) growth rings of the pike vertebrae.The identified species and the size estimations of the pike points to the fishing being active both during spring and summer. Growth rings analysis of the pike vertebrae didn?t give any quantitative results because of fragmentation.

Syfte: Syftet är att göra en redogörelse av förutsättningar för destinationsutveckling genom en film. I den här redogörelsen kommer vi att testa valda teorier på Öland.Metod: Vi valde att utgå från en deduktiv ansats för att på så vis kunna pröva våra valda teorier om filmturism på vårt empiriska material. Utifrån våra teorier kom vi fram till kategorier som vi utgick från vid insamlandet av vårt empiriska material. För att samla in information till vårt empiriska material intervjuade vi respondenter från Öland. När vi prövade teorierna på våra intervjurespondenter ställde vi frågor utifrån de kategorier vi kommit fram till.

Aim: The aim of this study was to examine health professionals´ experiences of giving advice regarding sleep to parents of infants and to perform and evaluate an intervention in the form of introducing information about the sleep of infants.Method: The study was designed as an intervention study with a qualitative approach where data was collected from two focus groups in the form of interviews. The intervention consisted of the information material Sugen på sömn. There were five participants whom three of them participated in the second interview. The interviews were processed by content analysis.Results: Health professionals´ experience of giving advice on sleep was summarized in three themes. The experiences of giving advice in interaction with parents, health professional themselves experienced the power to influence the parents with the advice they gave, while the parents' previous experience and knowledge impacted on how the advice came into practice.

Earth?s resources have been exploited unsustainably. If an entire conception of exploitationof natural resources does not change now, this will entail enormous costs in the future.This insight has lead to a recently increased interest in clean technologies among privateequity capitalists. In the fourth quarter of 2006 about 10 percent of all private equityinvestments made in the US market were placed in the cleantech industry. Despite a goodinvesting climate in Sweden, Swedish capitalists have shown little interest in cleantechinvestments.

Linnéuniversitetet Kalmar Institutionen för samhällsvetenskaper  Arbetets art:                   D-uppsats, 15 hp                                                                           Lärarprogrammet                                      Samhällsutveckling med ett internationellt perspektiv Titel:                              Hur sker implementering av förebyggande arbete gällande hiv och aids?  Författare:                      Nina Svenman Handledare:                   Gunnar Hansson ABSTRACT This study analyzes the prevention of HIV and AIDS around the region of Pretoria in South Africa. The study's starting point is the cultural, economic, social and health which is relevant when different levels of society affirms. The aim has been the basis of the representation levels of society discern what is valued and given priority as well as the measures and the strategies used in implementation. The empirical data underlying the study is qualitative studies with respondents from a university, a hospital, a school, the Swedish Embassy and an organization in order to create an image of different levels in society means to implement preventive measures on HIV and AIDS to their citizens. The result demonstrates that there are clear shortcomings in its implementation guidance on prevention measures for HIV and AIDS as lack of resources is based.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

Syftet med arbetet är att illustrera och utvärdera vilken betydelse undervisningen, vid en montessoriskola, har för utvecklingen av en god taluppfattning. Studien fokuserar på de naturliga talen från 0-20. Jag är montessorilärare och arbetar i en montessoriskola. Därför var det intressant att studera undervisningen på en montessoriskola. Den nationella läroplanen i Sverige, montessorimetoden och forskning om taluppfattning studeras.

SammanfattningDet här projektet behandlar området Additiv Tillverkning (AM) för metalliska material och undersöker om det är lämpligt att använda vid produktion inom flygindustrin. AM är en relativt ny tillverkningsmetod där föremål byggs upp lager för lager direkt ifrån en datormodell. Teknikområdet tillåter i många fall större konstruktionsfriheter som möjliggör tillverkning av mer viktoptimerade och funktionella artiklar. Andra fördelar är materialbesparing och kortare ledtider vilket har ett stort ekonomiskt värde.En omfattande litteraturstudie har gjorts för att utvärdera alla tekniker som finns på marknaden och karakterisera vad som skiljer de olika processerna. Även maskiners prestanda och kvalité på tillverkat material utvärderas, och för varje teknik listas möjligheter och begränsningar.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

Strategic development is something that concerns all companies, regardless of which industry they?re in. There is extensive research on this topic but one can question if the same theory also applies to E-businesses. Using case studies, this paper looks at strategic development in E-businesses and tries to answer whether strategic development in internet based companies is unique or if existing theory can still be applied. The predominant approach is to look into if E-businesses, due to a turbulent environment, rely less on market research and focus more on internal resources than would be expected by companies in more stable environments.

The transportation sector is the only sector of the Swedish society that is still increasing the emissions of carbon dioxide and other green house gases. Diesel fuel represents one of the fuels that contributes to these emissions and the use of diesel fuels is increasing every year. The main purpose of this study was to make an estimation of the current business situation for producers of liquid diesel biofuels in Sweden such as biodiesel, synthetic diesel and crude tall diesel and examine the forces of competition of the industry today and its future prospects. The study revealed that the rivalry among the existing firms was low mainly due to the geographical spread of the companies. Moreover the success of the biodiesel industry was influenced by a long-term guarantee of the tax exempt for biofuels and by the price level of petroleum diesel.

Investor Relations is a function used by companies to compete for capital by creating relations with investors. It is a young function, earlier practiced by the same people who had responsible for exercising the Public Relations.Investor Relations has evolved a great deal lately but there are still no concrete theories behind the function. The aim though is clear and there are literature explaining how to practice the different parts. The most research within Investor Relations uses the theory of Relationship Marketing. Lately the two authors Hägg and Preiholt have started to examine what they call Financial Marketing since Investor Relations is about relations between actors on financial markets primarily.In this paper, we examine the aspect of information in Investor Relations.

Byggsektorn har fortfarande svårigheter med att hantera fuktproblematiken.  Vi har valt att fokusera på hanteringen av material i produktion. Den informationssamling vi utfört ligger till grund för vår analys och slutsats. Vi har intervjuat flera olika entreprenörer från byggbranschen för att ge oss en helhetssyn av fuktsäkerheten ute på byggarbetsplatserna. Studien påvisar att det råder brister både på beställar- och entreprenörssidan. Vi ser att det finns potential för förbättring när det så krävs.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.