The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This thesis intends to analyse conditions for a successful implementation of consociational democracy, as a democratic model in Afghanistan. The lack of critical reviews regarding the democratisation-process in Afghanistan initiated the purpose of this study.Lijpharts democracy model was used as the basis in the comparative study. Along with empirical evidence regarding how the complex process of democracy in Afghanistan is progressing, the study investigated whether the identified conditions occurred or not.The choice of which democracy model to use can be crucial for the democratic possibilities to even survive and become established in conflict-affected communities. The principle of consociational democracy is that it is an empirically based normative model that aims to organise the state in a way that works against the risks of majority domination and oppression against the minority.The empirical case study revealed that a majority of the conditions were not met, which then can counteract the possibilities for consociational democracy in Afghanistan. The study has critically examined the prospects for the success of consociational democracy in Afghanistan, and it can be assessed that there is a limited probability for a successful applying of this model..

From 1710 to 1713 the plague raged through the Swedish province of Scania. Other studies have been made on how the disease affected the society during the epidemic. This study tries to focus on the recovery afterwards. How did the population and the farmsteads recover after the plague? Statistics from parish registers and cameral records show interesting patterns in the demography, and that the recovery was far from complete 1720.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

The purpose of this thesis has been to develop a tool for modelling and simulating the nuclear plant Ringhals 3. The model should be used to improve the knowledge on the dynamics of the plant. Ringhals 3 is being upgraded to produce more power and a tool for analyzing the new operating conditions is needed.The work in this thesis has consisted of improving and developing an existing model of Ringhals 3 made with the modelling tool Dymola. The model has been validated by comparing the results of a simulated house load transient with data from the actual plant. Validation shows good agreement with data from the real plant.

Background to problem: Pensions play a big role in people's lives when life expectancy continues to increase. Companies can choose different ways of reporting their pension plans, and within the defined benefit pension plan poses the actuarial gains and losses that can be reported based on three different methods. Only one method will exist from 2013, how will the companies that use the other two handle the new situation?Purpose: Investigate why different companies have chosen to report its actuarial gains and losses along the corridor approach, directly against income or directly in equity. How will the companies that use the corridor method manage the situation when it will only be allowed to report in other comprehensive income as of 2013 and how will this affect them.Methodology: Data was collected through qualitative questionnaires sent to companies listed on Nasdaq OMX Nordic Stockholm, Large Cap and Mid Cap, and a qualitative interview.

This thesis work is the last part of the Master of Science education inmechanical engineering at KTH, Stockholm.The aim of this project was the development of a Multi-zone modelfor NOxformation in Diesel engines. Because of the stringent emissionlegislations, great effort is made to decrease the fuel consumption and theharmful emissions of internal combustion engines. Computer simulationsplay a decisive role in this context because they substitute the expensiveand time-consuming laboratory tests.The model is based on a multi-zone approach and uses the wellknownExtended Zeldovich Mechanism which gives a relation to calculatethe NO formation rate using the concentration of different gas speciesinvolved in the process.All the most important phenomena involved in the Diesel combustionhave been modelled. A special attention is then paid to the equilibriumconcentration calculation; this is a significant part of the model whichstrongly influences the following steps.A Simulink model has also been developed. This second version isbased on the previous model and it is made especially to allow theconnection with other external softwares, GT-power in this case.

Listed corporations achieve effectiveness through segmentation of investors. Categorization of like- minded investors diminishes goal incongruence. This thesis aim to examine an Investor models accuracy, provided by a Professor Emeritus in Economic Psychology in 2001. This model segments investors as active, passive, speculative and naive investors. This thesis has a demarcation to private investors on the Swedish stock market. It has a deductive and qualitative approach as the purpose is to study the Investor model.

The forest is characterized by many different values such as those related to forest productivity which are of a big importance for Swedish economy. History has proved that forest resources had helped the country in the transition from the agricultural to the industrial society. Today Swedish forest industry is among the strongest in Europe and significantly contributing to the Swedish export. The industry provides many direct and indirect job opportunities and is one of the biggest employers in the industry sector. It is also worth to notice that the forest can also generate an additional income for the owners, even if the forestry isn?t their primary income source.

Simulation means running a model of a system with suitable input and observing the corresponding output. Real-time environment simulation is a special kind of simulation used to simulate a control system's environment in real-time. This is done to test the control system before it is used in its real environment. In this project, computer simulation of a certain kind of environments, called track-based systems, is studied and a general model for track-based systems is developed. In this model, track layouts are represented by graphs, which is a flexible and extensible representation and a method for visualizing these layouts is presented.

Sweden have 419 000 km road in the country and about half of these roads is forestroads. The forest road net most important mission is to make it possible to deliver wood from the forest to the industries. With a raw material that is spread over a large area the road network is important. Each year has the forest road network been extended with about 1 700 km new roads. To decide if a new road is to be built different forest road cost estimation models has been used.

"Speak up! I can?t hear you"This qualitative study is built on an investigation of a newly instated model that is used when building or renovating schools. The principles of the model are based on building schools with an open plan design where the walls are made of glass and the classrooms are not shut closed by walls, instead the classrooms are completely open except from screens that are used to indicate the ambit of the rooms. This model has been well debated and that is the reason why we chose to do this study.The purpose of this study is to find out how students and teachers experience this model. To do this we have done interviews and observations.

Purpose: The purpose of this thesis is to examine the ERK model's relevance, validity and potential need of development to better reflect how it looks today (2013). Method: The study is conducted through three surveys; the first two were face interviews with companies that sponsor Swedish soccer teams and the third study was conducted with a questionnaire to supporters outside a soccer stadium. Results: A model that would better reflect the reality of today (2013) could contain company pride, chairman?s whim, exposure, relationships and associations..

The purpose of this work has been to investigate if there are any differences in the valuation process at infringements when highway and railway are built. The work has mainly been concentrated on the negotiation process in which The National Railway Department (Banverket) and The National Road Administration (Vägverket) try to get agreements with the land owners. The agreement includes compensation for infringement effects that affects the landowner?s property. The National Road Department uses the road law (Väglagen) when a highway shall be built.

Wind is used as an energy source all over the world. To be able to use this effectively, there is a need for as good forecasts and forecast models as possible. One of these models is Coupled Ocean/Atmosphere Mesoscale Prediction System (COAMPS®) that is used to calculate short time forecasts. This model is used here to calculate wind speeds at two different areas in Västra Götaland, Bengtsfors and Vänersborg. There are also wind measurements with SODAR stations for these areas.