With today`s business world, it is very important to deliver the right product with right quality and quantity at the right time. By ensuring that the staff are happy and have the opportunity to work in a workplace with good structure, the company will be able to reach these parameters and at the same time maximize the efficiency.The project has been carried out at Stena Stål AB in Värnamo. The company's main task is to cut, store and deliver production steel and tool steel to processing companies in the surrounding region. Stena Stål AB in Värnamo is one of total 21 companies in the company group Stena Stål. Stena Stål is a part of the Stena corporate group which owns a total of eight different company groups that are spread in about 250 different locations in 14 countries.The purpose of this report is to give Stena Stål AB in Värnamo suggestions on how to design a new facility for tool steel.

A manufacturing machine at the engineering company Sandvik Coromant has a positioning table which task is to move an item linearly. The positioning table has a linear motor capable of high velocity and acceleration. This makes it possible to achieve short cycle times and a more profitable production.The purpose of this thesis is to bring forward a new concept which is more adapted to the requirements of the positioning table. The reason is that the current positioning table provides an unnecessarily positioning accuracy of 0.01 mm, while the requirement for the positioning accuracy is just 0.1 mm. The goal is to reduce manufacturing and component costs.To develop a suitable solution an approach for the concept development process has been performed.

In the European Union and in Swedish labor law, permanent employment is the main goal for employment of workers. An exception to that rule is temporary employment. The Swedish rules relating to temporary employment have undergone several changes since the Employment Protection Act was implemented in 1974. The last reform in 2007 has received criticism by respondents for not following the Union directive on fixed-term work, which went into effect in 2001. In 2010 the European Commission opened an infringement case against Sweden, after a complaint from a Swedish employees? organization.

Utvecklingen av informationssystem utförs vanligen med hjälp av en systemutvecklingsmodell där kravhanteringsaktivitetens (Requirements Engineering ? RE-processen) syfte är att samla in och bearbeta kundens alla krav på systemet. Den slutliga produkten av RE-processen är en kravspecifikation där alla kraven gällande exempelvis systemets funktionalitet, syfte etc skall specificeras.Det är inte alltid självklart vilken information som en kravspecifikation bör innehålla då detta dokument kan för både kunden och leverantören ses som ett kvitto på vad som skall utvecklas och hur det skall gå till. Dokumentet skall nämligen fungera som ett underlag för de så kallade implementations- och designaktiviteterna i systemutvecklingsarbetet samt fungera som ett underlag för diskussion och kontrakt mellan leverantör och kund gällande utvecklingen av informationssystemet. Kravspecifikationen bör därför innehålla komplett och förståelig information så att detta dokument uppfyller sina syften.

The aim of this study was to find out how journalism students at two universities in Sweden, Gothenburg University and Linnaeus University in Kalmar, use the social networking service Twitter. We were primarily interested in whether the students are using Twitter as a journalistic tool, which includes gathering, production and distribution of material. The study focused on journalism students because they soon will enter the working life and therefore can provide an indication of whether Twitter is a part of the future of journalism. We have used theories of mass communication to describe the development in the area and explore how journalism has adapted to this change. The study was conducted in the form of a survey in which the students answered questions about how they use Twitter and what they think about the social networking service.

The public sector is a major purchaser of goods and services. By setting requirements for environmental and social considerations in public procurement, an authority has the possibility to use consumer power to influence the actors in a market. The purpose of this paper is to investigate public procurement of textile products in a municipality, in order to gain knowledge about factors that may be important for the use of environmental and social criteria. Håkan Hydén´s (professor in sociology of law) norm model was used as the basis of the analysis, where the conduct was investigated along three dimensions of the norm ? willingness, knowledge and system conditions ? in order to identify underlying factors that can influence the process.The results ? analyzed by using interviews and documents ? show that the procurer's willingness, motivation and knowledge are important factors in this context, as well as the political priority of the municipality.

Information Technology (IT) makes it possible to electronically distribute data between actorswho are in geographically diverse areas. Nowadays, information is sent less frequently throughtraditional correspondence in favor of faster electronic equivalents via the internet.Despite effective IT environmentand secure encryption techniques choose some actors to sendinformation through physical delivery. This phenomenon occurs in those working withconfidential information as it is handled by a number of rules and safety regulations.Based on a set of rules and requirements, we have looked over the possibility of sending sensitiveinformation electronically over the internet. The aim was to find general guidelines for howcompanies and organizations should manage and send sensitive information over insecurenetworks. This led us to our research question: How can information be exchanged betweenactors in geographically diverse areas be categorized and encrypted so that it can be transportedover the internet without security or integrity deficiencies?To answer the question, there was a case study at a defense company.

In Europe, the central governments are the ones to coordinate the international standards and strategies regarding GPP; Green Public Procurement. However in Spain a GPP program was introduced late and only applied to the Central Government Institutions, (AGEA) (BOE nr. 027, 2008). These means that smaller administrations, such as, Autonomous Regions, Municipalities and Town Councils were not included in the program. The absence of a national program which excludes those governments made them introduce their own criteria for GPP, and the difference in criteria varies from one government to the other.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

This project has revolved around finding better ways of overseeing vibrations of the gearbox at a wind power station. The gearbox has been a huge problem at the stations located at Gässlingen and the sooner the warning of an incoming breakdown is at hand the more money you can save from preparations. The work has been carried out together with Askalon AB in cooperation with consults from ÅF. Askalon is a company with a department focused on overseeing vibrations and it is in collaboration with that department the work has been carried out. During this work, new positions for the sensors and new methods of gathering and analyzing data have been worked out. This was then implemented at a wind power station to be tried out on site.

The number of elderly people has been steadily rising in Sweden for a long time and as a proportion of the population, the increase has been even greater. The population structure in the country means that in the not too distant future, there will be a sharp rise in demand for care and elderly accommodation.A tighter credit market as a consequence of new rules and regulations with a stricter capital and liquidity requirements combined with market turbulence, has made financing property developement more difficult and more expensive which has resulted in many companies using alternative sources of finance.DEmand for safe investments with low risk is high as the market is volatile and banks, pension funds, fund management and life insurance companies are looking for investments outside the stock market that can deliver a safe return in the longer term. There has also been a debate about whether institutional investors as the AP pension funds really should own properties directly.As properties for care and elderly accommodation are definable assets with predictable payment flows, long leases and often a local authority as tenant that would not risk cancelling payments, these would be highly appropriate for securitisation, i.e. to issue bonds or other tradable securities based on the cash flows from the assets.In other words, the securitisation of rent flows would offer the opportunity to create an attractive investment product of the type being demanded, well suited to institutional investor requirements, while at the same time, it can provide an attractive financing opportunity to meet the need for more care and elderly accommodation..

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better productivity. In conclusion, the report author tries to demonstrate what can lead to increased productivity and improved work experience..

Many sources point to the same conclusion; throughout the history the research sphere, mass media, governmental industry policies and public life in common have not paid the same attention to medium-sized companies as to small, new or large companies in Sweden. Yet, there are some researchers claiming the need for the medium-sized companies to grow, becoming tomorrow?s Swedish new large companies. Hence, the need for understanding the specific growth conditions of the medium-sized companies are definitely clear. This study aims firstly to identify whether there are specific requirements and obstacles for growth in connection to being a medium-sized company.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

The following essay describes a study made in Sweden in the autumn of 2010 at Södertörn University. The main purpose with this study is to find out and describe how people´s own understanding of being multilingual has influenced them. The objective behind this is to create a wider understanding for the phenomena. Therefore, the phenomenological perspective is used to describe the subjective reflection of a phenomena, in this case multilingualism. A qualitative method is being used for data gathering, implying conversational interviews with six multilingual people born in the 1970s and 1980s.The results show that the people interviewed mostly use their mother tongue in conversations with their parents and relatives today.