The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

In July 2011, new regulations regarding school libraries came into effect through a new education act for Swedish schools. The wording of the Act has been the basis of much discussion in which the concepts of "school library" and "access" makes it difficult to build consensus among different parties, why this can cause difficulties in ultimately construct equal access to school library. The purpose of this survey is to examine the interpretations and practices that exist around the school library and its functions among primary school principals. The principals have been selected on the basis that they themselves (the schools) already indicated that they do not have access to their own school library within the school premises. As a theoretical starting point, I used the school library researcher David Loertscher?s taxonomy for school leaders.

This degree project studied surface waters on Kåbo Golf Course in Uppsala, Sweden, with the aim of determining the status of the water and how it is affected by the activities of the golf club, and to obtain suggestions of measures to create better conditions for the water environment on and around the golf course. The project forms part of the environmental protection work of Kåbo Golf Club, which is working towards achieving environmental certification from the Swedish Golf Association (SGF). The study is based on literature studies and quantitative and qualitative field studies of water on the golf course, with the focus on environmental factors identified as being important for the golf industry and on strategic environmental goals developed by SGF. The number of open water bodies in the Swedish landscape has substantially declined during the past 200 years, so it is important to save those that remain. This study showed that the surface water at Kåbo Golf Course is an important element in the surroundings since the area contains few wetlands, which can be a habitat for large numbers of species. The stream and ponds on Kåbo Golf Course also have the important function of serving as water hazards in the game and adding difficulty and variety to the course. Since Kåbo Golf Club wants its surface waters to look aesthetically appealing, extensive algal growth and drying up of ponds during parts of the year are regarded as problems.

This study examines how formal mathematics can be taught in the Swedish secondary school with its new curriculum for mathematics. The study examines what a teaching material in formal mathematics corresponding to the initial content of the course Mathematics 1c could look like, and whether formal mathematics can be taught to high school students.The survey was conducted with second year students from the science programme. The majority of these students studied the course Mathematics D. The students described themselves as not being motivated towards mathematics.The results show that the content of the curriculum can be presented with formal mathematics. This both in terms of requirements for content and students being able to comprehend this content.

This thesis is a critical discourse analysis of the vision of Malmös contemporary urban development. By analysing official documents produced by Malmö municipality our aim is to make discursive and sociolcultural practices in the constitution and construction of the city visible and problematicize them. To do so we use critical discourse analysis and theories on Urban Studies. Malmö is a city historically labeld as a ?labour- city?, with heavy industry as its main labourmarket.

Många företag idag är inte medvetna om hur mycket de skulle kunna spara om de hade ett väl fungerande materialhanteringssystem. Det finns idag inga standardlösningar för att optimera materialhanteringen hos företag som ger tillräcklig noggrannhet och som företag kan applicera till låga kostnader.Genom kartläggning av problemställningar inom svensk industri och handel avseende materialhantering fastställs att den största kunskapsbristen inom materialhanteringsområdet kommer att bli inom lagerhantering. Arbetet begränsas därför till att bara behandla detta område.Detta arbete presenterar en generell modell för analys och framtagning av lösningar till lagerhanteringsproblem. Modellen är lättanvänd, lättförståelig och tar inte mycket tid i anspråk. Modellen presenteras som ett enkelt polärdiagram.Denna modell blir givetvis inte en perfekt spegling av verkligheten då det är en förenklad modell.

In Uppsala, Sweden, Vattenfall has a combined heat and power plant. On the premises there is an engineering workshop with old fluorescent and mercury lamps that need to be replaced. This provides a great opportunity to save energy and money by installing more efficient lighting. The main purpose of this study was to present two functional and energy efficient lighting systems including control system. The lighting systems were designed by investigating the working environment, measuring illuminance and by simulations in the software DIALux.

 SammanfattningKravhanteringsprocessen är en av de viktigaste faserna vid utvecklandet av ett IT-system. Kravhantering är alltså grundläggande för att utveckla ett stabilt system som uppfyller beställarens önskemål. Med en väl utförd kravhantering som grund får man ett system som är fritt från bristfälliga fel, utvecklandet av systemet går även till på ett effektivare sätt. Vid byggandet av ett system eftersträvar man alltid en framgångsrik mjukvara. Kravhantering ses som den viktigaste faktorn vid utvecklandet av ett IT-system.Föreliggande studie genomförs som en litteraturstudie där undersöks vilka brister som är vanligt förekommande under kravhanteringsprocessen.

Background: Performance measurement as a management control tool has received considerable academic attention. As the number of inter-organisational relationships, such as customer-supplier relationships, increases, there is a new scope for performance measurement as a management control tool. In order for a company to assess the effectiveness of its supplier relationships it has to define, measure and evaluate variables that are critical for the success of the relationship. The role of management control, and thereby of performance measurement, has increasingly been discussed in theory. However, empirical research in this area is still somewhat limited.

Problemområde: Fler och fler privatpersoner kopplar upp sig mot Internet via bredband. En anledning till detta är att fastighetsbolagen allt oftare erbjuder sina hyresgäster fast uppkoppling. Vad hyresgästerna kanske inte tänker på när de är uppkopplade flera timmar i sträck, är att det är lättare för någon utomstående att göra intrång i deras datorer. Frågeställning: 1. Informerar bredbandsleverantörer sina kunder om risker för intrång? 2.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible. When investigating the different principle of purifying water, a research of different products and their manufactories was done. These different products were compared and the principle of filtration was the most applicable, as most of the products were designed for far larger applications. As the process water contains quite large amount of particles, it is necessary to perform the filtration in different steps. The process water purifier is therefore composed of a module of coarse filtration and one of micro filtration. In the module of coarse filtration the mainly amount of fibres and particles are eliminated. They are kept back in the container unit with the larger fragments and dumped with these when the container is emptied. In the module of micro filtration the filtration is performed in two steps. In the first step particles larger than 50?m are eliminated, in the second step the micro filter is setting the range of purifying, in this case 10?m.

This thesis aims to investigate what requirements companies have in order to achieve a successful legislative compliance control. The implementation of an environmental management system can help the company to structure their business and succeed with their environmental legislative compliance.Both small and medium sized businesses perceive that it is difficult and time consuming because the legislation can be difficult to interpret if you do not have the required knowledge. There are many companies that hire help in the form of consultants who audit their compliance, but this leads to a risk that the company will be exposed when the knowledge does not remain in the company if the consultant would cancel the cooperation. There are not so many tools today for businesses to obtain good legal compliance. The methods used are usually checklists included in the control program, and it costs a lot of resources to do everything needed.This study strives to deliver the expressed needs of the businesses.

Examensarbetet gick ut på att stötprova ett system för upphängning av kablar och rör i fartyg. Vid stötprovningen monterades upphängningssystemet i en fixtur. Gruppen fick fria händer att utforma fixturen. Med hjälp av Fredy Olssons teorier om produktframtagning utvecklades en fixtur bestående av fyrkantrör. Genom att värdera och selektera bland de lösningar som presenterades i examensarbetet ?Upphängningssystem? BTH-IMA-EX?2000/C-02-SE och andra nytillkomna likvärdiga lösningar, har gruppen kommit fram till och stötprovat ett system, bestående av aluminiumprofiler och vinklar från Bosch Rexroth.

This document is a summary of my work to create a project management system for a small firm working with computer graphics. The intention is to manage customers, projects, images and invoices in the easiest possible way. To make the system as flexible as possible a web-interface was chosen which makes it possible to access the system from any computer, making it independent of any particular operating system. The only requirement on the user environment is that the computer must have a connection to the Internet to be able to access the system. The different techniques that have been used to develop the project management system is primarily Ruby on Rails and a MySQL database. Although Ruby on Rails was completely new to me, I decided to use this framework instead of PHP, which I already have a good knowledge of, because of the benefits Ruby on Rails provide.

The change in course recently taken by the Swedish Armed Forces results in an increased use of equipment, and thereby increased requirements of preventive maintenance. This paper aims to examine the current responsibilities for preventive maintenance in an army unit. The intended effect of this examination is to disclose possible flaws, and to help make routines for preventive maintenance more effective.The questions asked in this paper are;Who, in an army unit, is responsible for the routine maintenance?When is this responsibility valid?What demands does the technical service have on responsibilities for the routine maintenance?How are these demands met?How ought to be responsible for the routine maintenance?To answer these questions the author has chosen to use a descriptive method to show the current facts. A theorizing method is chosen to, from described facts, clarify the demands of the technical service on routine maintenance.