During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

Due to their complexity and heavy wear from rail traffic, switches are a sensitive part of the railway infrastructure and moreover expensive to maintain. Furthermore, increasing railway traffic not only accelerates the wear rate but also obstructs the necessary maintenance measures. This paper examines the opportunities for a transition to a long-term maintenance strategy in the Swedish railway network. It contains a study of the maintenance strategy of Banverket, and also analyses statistics of errors in the railway infrastructure. The survey was completed utilising interviews with infrastructure managers, maintenance contractors, planners of railway operations and the Banverket material service department.

Styr is a computer program that the construction company NCC use in their construction projects. The program is used to keep the economy of their projects in a good order and things for the best in an early phase. The problem is a low extent of utilization. During the latest decade NCC has put a lot of job and money trying to develop the program. The question is how to get the employees to use the program in a greater extent.

The project has been implemented in collaboration with Carl-Johan Lundberg on Deltagruppen Ltd in Jönköping. Problem introduction comes from Carl-Johan's own experience from the hotel sector. The problem that all hotels has is that they sell two products, i e. simple - and double rooms. Persons that travel in companies do not desire always to share bed.Focus in the work is to develop a product that holds together two simple beds and forms double bed, concurrent that it goes that converters to two simple bed without needing to disassemble the product and be done invisible.

In this paper, a small business network with around 30 users is analyzed with respect to security, performance and usability. Based on this analysis, two suggestions on how to solve the problems listed are given. The first suggestion focus on keeping a low budget, while the other tries to deal with the problems more thoroughly. One advantage of the first suggestion is, in addition to not straining the company's budget more than nessecary, it does not involve too great changes in the way the network is used and administered. On the other hand, the smaller budget leads to certain compromises, and there is a risk that similar problems occur again if, for example, the company would grow.

The communication with government and municipality through Internet has in-creased during the last couple of years. Therefore we have chosen to focus our bachelor thesis in this particularly area and the needs for usable web services for the citizens. In this bachelor thesis we are studying a increasing group users, namely elderly citizens. During the study we have analysed E-governments ser-vices usability through usability tests. The combination of conversations and meetings with individuals, observations of interactions and literature studies give us the opportunity to explore the users needs.

This is a report on the development and implementation of the web shop ?Urballa Ur?, a web application developed by nine students at Linköping university. The report illustrates the methodology and process with intention to answer the question ?How can an online watch store be implemented to increase sales??. During the process the agile method scrum has been used as a working method.

The aim of this project was to develop educational resources concerning bioenergy and sustainability. The initial purpose was to produce two sets of material: one suitable for children in their first years of Swedish compulsory school, and one designed for upper secondary students. In the report, however, the possibilities are discussed for this material to be used with even wider audiences.In the first phase of the process, literature (books, reports etc.) with relevance to bioenergy, sustainability and theories of learning were studied. This insight, along with the appropriate course curriculums, was used in the development stage to produce learning material for the targeted audiences. The development was followed by tests and evaluations carried out with high school students, upon which an analytical discussion is held regarding the consequences and possibilities that the results of this project pose.The content of the learning material is based on the curriculum and course requirements provided by Skolverket (The Swedish National Agency for Education) for lower elementary and high school students.

IT-användandet i byggbranschen har banat väg för nya, effektivare arbetssätt och det finns visioner om hur det ska fungera. Syftet med vårt examensarbete är att ta reda på byggbranschens användande av, och vision om BIM. Vad är BIM ? Building Information Model?Kort beskrivet är BIM en modell där all information för ett byggprojekts hela livscykel kan hanteras. BIM förenklar det fortlöpande arbetet genom hela byggprocessen genom att tillhandahålla information om projektet som är relevant, uppdaterad, integrerad, fullt koordinerad och av hög kvalité.

This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.

The Pedagogical progression within MSI ? Based upon The Bologna Process and UPC.In a near future several of the European countries will begin working after new guidelines concerning a declaration called the Bologna process. Everything will be done one step at a time and the declaration will change the way the students are being graded, all this for the sake of making the European labour-market moreopened for all of its millions of students.In Växjö this process is in the making, but to adapt to the future demands the school must also change its ways of teaching.To increase its quality the University has put together a procedure of actions to improve the pedagogical working method in all its institutions. In this essay we would like to elucidate how the work with the Bologna process is proceeding within the institution of Mathematics and System Engineering and whatthey do improve their pedagogical teaching. By doing a qualitative case study on the student at the Computer Science Program we wish to find the answers to our questions..

This report describes how a syringe pumpwas developed for Q-linea AB inUppsala Science Park as a bachelor´sthesis at Uppsala University. Thepurpose of the syringe pump is toreplace existing pumps in one of Qlineasdosage instruments. The reasons for whythe pumps are replaced are that they arebig and heavy. Therefore the task was todesign a smaller and lighter syringepump.The goal of the project was to create aprototype of the design that met themechanical requirements posed. Therequirements were met.In the report the work process can befollowed from the development of thespecifications to the final design andtests of the prototype.

This study is intended to give an impartial view of a young and complex program in Sweden titled Product Innovation Engineering program. The purpose of this program is to increase innovation capability in Sweden that will result in new companies, patents and economic growth. The results from this study might give some direction to future innovation initiatives, but should primarily serve as a tool for the PIEp participants. The study will focus on investigating the creation of the program as well as the development of its strategy. From weaknesses and strengths within the strategy of the program the study should also attempt to show its future potential.

With the huge amount of computers connected to the Internet the IP-addresses are starting to run out. The Internet Engineering Task Force, IETF, have decided that it is about time to exchange the old 32 bits Internet protocol, Ipv4, to a more modern 128 bits protocol called Ipv6. This thesis explores the possibility to install Ipv6 in different operating systems. By testing various operating systems and by set up criteria compare them to each other we give the reader a picture of how the installation is done. We also show which operating systems to prefer if you want to use IPv6.

Denna rapport, En jämförande studie av Svenskt Vattens och CAC:s syn på HACCP-processen, En utvärdering och ett praktiskt tillämpande av Svenskt Vattens Handbok för egenkontrollprogram med HACCP, skriven av Anna Järvegren Meijer (handledd av Kenneth M. Persson, professor vid Teknisk Vattenresurslära, Lunds Tekniska Högskola och Anne Levin, konsult på SWECO VIAK, Malmö) behandlar kvalitetssystemet Hazard Analysis and Critical Control Points (HACCP) och fokus ligger på tillämpning inom beredning och distribution av dricksvatten.Rapporten består av tre delar. I den första redovisas HACCP-processen och de arbetssteg som Codex Alimentarius Commission har tagit som praxis. Här jämförs också Svenskt Vattens syn på HACCP i Handbok för egenkontrollprogram med HACCP med just CAC:s. Det konstateras att skillnader finns då Svenskt Vatten har valt att inte följa CAC:s praxis till punkt och pricka utan utformat arbetsgången annorlunda.Den andra delen av rapporten handlar om hur användarvänlig Svenskt Vattens handbok är i praktiken.