Sök:

Sökresultat:

1977 Uppsatser om Requirements Engineering - Sida 12 av 132

Underlag för framtagning av målningslina : Hantering och layout

Seabased Industry AB develops system for extracting electrical energy from ocean waves with a Wave Energy Converter (WEC). The components is bought from subcontractors and then assembled into wave energy converters, buoys and marine substations by Seabased. In the future Seabased will produce more of the components themselves to reduce costs and to have better control over tolerances. The production line will also include the painting of the WECs and substations, which is performed in a painting line.The purpose of this thesis work is to study what is required to build a painting line, regarding the types of stations, transporting types and the space needed. This will result in layouts for the painting line.To receive the necessary information about production theory and corrosion and surface treatment, literature concerning this area has been studied.

Riktlinjer för studier av icke-existerande komplexa sociotekniska system : Erfarenheter från en studie av införandet av ombordbaserad helikopter på korvett av Visbyklass

This report consists of a discussion about suitable methods for studying complex sociotechnical systems that are still being developed. There are large economical advantages with studying new systems before they are completely developed since problems can be discovered early and thereby avoided. It is, however, difficult to study developing systems, there are methodological limitations. These limitations are discussed and recommendations for studying non-existing complex sociotechnical systems are presented.The report is based on experiences from a study of the introduction of a shipboard helicopter on the corvettes that the Swedish Armed Forces are developing. A shipboard helicopter implies high requirements on the hosting ship.

Val av värme- och ytbehandling

Atlas Copco Tools develops and manufactures handheld industrial tools. Heat and surface treatments are used to provide the tools with certain properties. There are no routines for the choice of treatment or for how to specify treatment on drawings. Production documents that are sent for production abroad may not be clear enough. Some treatments are known as trademarks and there are no instructions for how to specify these on drawings and in CAD-models.The purpose of this master thesis work is to create recommendations for the procedure of choosing heat and surface treatment.

Utvecklingen från traditionell ekonomistyrning till verksamhetsstyrning : En studie inom ekonomistyrning

This thesis primarily includes a study on whether companies can develop a mathematical activity that supports students' motivation in mathematics. The work was done together with Midroc Electro, a company that pays attention to the difficulty of recruiting and therefore was interested in investigating how the business world would be able to contribute.The thesis can be divided into three stages. The first part comprised by a exploration into research on student motivation regarding mathematics as well as numerous interviews with engineers to see how the research findings did fit with Midroc Electros reality. In these studies it became clear that the student who aims for a profession whose education or work requires math belongs to the group of students who primarily manage their studies in mathematics, that is, those that have the greatest motivation to work hard and complete their studies.Research information and interviews were compared and resulted in the thesis second part, Midroc Challenge. An activity where students primarily came to learn about the engineering profession and secondly how mathematics can be used in the engineering profession.

Tekniska system i förskolan : 3-5 åringars uppfattningar om mobiltelefoni

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

Analys av behov och potentiella verktyg inom Business Intelligence för detaljhandelsaktörer : En studie på Akademibokhandeln AB

Business Intelligence (BI) is a competitive concept for enterprises to consider. The concept is based on the idea of using business data in order to effectively analyze activities within an enterprise in order to enhance decision processes in the organization.The purpose with this study is to help Akademibokhandeln AB to analyze what BI-requirements they may have, and to create a recommendation on what sort of BI-tool that would fit the enterprise's needs.The requirements analysis was conducted with the help of internal personnel. Four different tools on the BI-market have been examined, analyzed and compared: IBM Cognos 8 (IBM Cognos), Microstrategy 9 (MCST), Qlikview 9 (Qlikview), and SAP Business Objects BI (SAP BO). These tools have been compared with the help of two models (BRI and BCI) that is based on the BI-requirements analysis, with the cost aspect taken into consideration in the BCI-model.Using the BRI-model, the comparison results in a technical evaluation. Here, IBM Cognos gets the highest result just ahead of MCST and SAP BO.

Energibalansen för ett nytt flerbostadshus i Mellansverige : Beräkningar intervjuer och analys av energikraven i Boverkets Byggregler

Abstract   This degree project comprises 30 credits, i.e. 20 weeks of work. The work mainly deals with the energy balance for a multi-family house in Västerås and the requirements for energy conservation in the Swedish building code, BBR. Calculations of the energy balance are supplemented by a number of interviews. Energy conservation in general has become more important in recent years and the subject is in line with increased public awareness. This importance and attention is explained by environmental problems in general and global warming in particular, but also by rising energy prices.

Svävare : Utforming av hytt

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

Osäkerheter vid brandteknisk dimensionering av ventilationssystem

This masters thesis deals with smoke spread via ventilation systems. One aim of the thesis is to investigate and explain the differences in efforts to prevent smoke spread via ventilation systems in different countries. A second aim of this thesis is to investigate how frequently occurring smoke spread via ventilation systems in Swedish buildings are. A third aim is to investigate how uncertainties in input variables to smoke spread calculations will affect the result of calculation. To be able to do this the most important input variables are identified and analysed.

Användarmedverkan ur ett användarperspektiv : en undersökning om sambanden mellan användarnas åsikter kring kravhanteringsprocess och färdigt system

I dagens samhälle spelar informationssystem en viktig roll i de flesta företag och organisationer. Informationssystemets uppgift är att tillgodose och hjälpa användarna med information och informationshantering samt att leda till en effektivisering.Arbetet med att utveckla databaserade informationssystem är problematiskt och systemutvecklingsprojekt överstiger ofta budget både vad gäller tid och pengar. Återkommande problem är att systemen inte gör vad användaren vill samt att systemen inte utnyttjas till full kapacitet. Svårigheten med kravhanteringen är något som anses vara en orsak till misslyckandena.Den viktigaste informationskällan för systemutvecklarna då det gäller att ta reda på systemkraven är användarna. Då användarna spelar en viktig roll i kravhanteringen, vilken i sin tur spelar en viktig roll i systemutvecklingsprocessen, är detta ett intressant problemområde.Denna rapports fokus ligger på hur användarna ser på kravhanteringsprocessen.

Operatörsoberoende SMS-leverans med designmönstret Bridge

When different type of programs are developed one wants to make these adjustable to future changes and requirements. It must be done a good design of the program from the beginning to make it possible to continue development of it without having to redo big parts of it to high costs. In the area of object orientation there are design pattern, which can be used to design systems that can be adjusted to new changes in an easier way. I have in this thesis chosen to take a closer look at how to design a program that sends SMS to cell phones through a system of an operator. One requirement on the program is that it has to be possible to change what operator to send though in an easy way.

Automatiserad laddning och plundring mellan magasin

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

"Sanningens ögonblick" : En uppsats om organisationsprinciper och deras betydelse för kundorienteringen hos folkbibliotek

In writing this study, I wanted to examine which principles of organization that are possible for Swedish public libraries to use, and what these principles mean for the libraries customerorientation. This is done by examining a number of written sources, as well as studying the organization of six public libraries. I found several possible principles, but a number of principles have been more commonly used than others. Historically most public libraries were organized according to the functions needed to be carried out within the organization, but today it is much more common to use subject-based organizations, with some examples of organizing according to user-groups and needs. I have also encountered the possibility of organizing according to the sources that are to be handled, or the way in which these sources are used by the customers.

Inventering av tillgängligheten i Bilbergska huset.

Akademiska Hus owns and manages the university facilities in most university towns in Sweden. Bilbergska house in Örebro was built in 2008 by Akademiska Hus, and designed by White Architects. Today's buildings must meet accessibility requirements determined by Swedish Board of Housing, and it is the developer who must ensure that they are fulfilled. Swedish Board of Housing requirements are often vaguely written and interpretation space is large.This report aims to investigate how much of the requirements which are set towards the University and landlord Akademiska Hus are being achieved. This is done by studying the requirements that are set.

Vändbord : Lokal Logistik

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

<- Föregående sida 12 Nästa sida ->