AimThe Swedish government has allocated a milliard Swedish Crowns on the project ?Ett handslag med idrotten?, (A handshake with sports), to make it possible for more children to participate in sports. The project goes on for four years and my work is an evaluation of the projects that have received fundings from Gästriklans Idrottsförbund for the second year. One aim is to see how many pupils that have been involved with the projects and especially the numbers of pupils earlier not active in a sport club and the number of girls. It is interesting to see what?s in common in the sport clubs that have had a large number from those two groups.

This master thesis consists of an investigation of the profitability per hectare in privatly owned forest land. The investigation is based on data collected from Skogsstyrelesen, Riksskogstaxeringen and Skogsforsk. During the last twenty years the prices on pulp wood and saw log have substantial decreased, but during the same time the the volumes from final felling have increased and the cost for felling has decreased, this investigation shows how the netprofit per hectARE after final felling has changed between year 1980-2005 This investigation shows that that the netprofit has stayed on a stable level during the years 1985-2005 even though prices pulp wood and saw log decreased. Much indicates that the demand of swedish pulp wood and saw log will continue to be strong or even stronger wich will give increased prices and an higher netprofit after final felling in the future.

The purpose of this developmental research was to test the new way of working when the students were to take part in planning of cooking during the lessons in home and consumer studies, because the aim of the school is to teach the students to take the responsibility for their studies. The two first lessons should be used by students in the group to plan and organize their meal. During the third lesson the students must be responsible for cooking ready their meal and afterwards they must evaluate the results. The results of this new way of working was new for the students and they thought it was fun to be responsible for cooking during these lessons in home economics. The students in the groups were of wixed ability and they developed their knowledge from the levels of their ability.

Strömstad is a small city located on the Swedish west coast. Urbanization and development is acurrent issue for the municipally, as for many other in the current situation. The municipal housingcompany Strömstadsbyggen is one of the parties involved in the extensive development that mustbe implemented to meet the changes and developments which the issue holds.One area that is of interest in the discussion is Rådhusberget - this due to the existing infrastructureand unique qualities that the area holds. In order to achieve the best solutions possible for the area,Strömstadsbyggen wishes to listen to what the existing tenants at Rådhusberget thinks and feelsregarding the area and its future potential.This thesis has therefore been carried out in collaboration with Strömstadsbyggen and has beenaimed at identifying the current tenants' thoughts and opinions in the existing area of developmentand infill potential. The aim of this work was also to investigate how the tenants value their homeand local environment in its current state, and what their wishes are for the possible futuredevelopment of Rådhusberget.To achieve analyzable results concerning how the tenants perceive these aspects, an extensivesurvey have been carried out which were sent out to all tenants in the area.

Aggression Replacement Training (ART) är en multimodal behandlingsmetod som riktar sig till barn och ungdomar med aggressivt och antisocialt beteende. ART bygger på kognitiv beteendeterapi (KBT). Metoden består av tre kompo-nenter. Social färdighetsträning, ilskekontrollträning och moralträning. Syftet är att se hur två klassföreståndare, en elevassistent och tre ART-tränare upplever elevers utveckling av färdigheter i och med ART-träning, samt se hur informan-terna upplever att klassen där den enskilda eleven ingått har förändrats i och med den ART-träning som denne erhållit.

Syfte:            Syftet med denna kandidatuppsats är att undersöka hur Collegium Restaurang & Konferens kan differentiera sin kylda färdigmat med fokus på kundens matval till kvällen, samt beskriva vilka möjligheter Collegium har att använda sig av relationsmarknadsföring.Metod:         Primärdata insamlades genom semi-strukturerade intervjuer med anställda och ägare på Collegium samt genom en enkät till nuvarande och potentiella kunder. Den insamlade informationen analyserades därefter till viss del kvantitativt (enkätsvar) och till viss del kvalitativt (intervjuer och de enkätsvaren med möjlighet till fria svar) med koppling till relevanta vetenskapliga teorier. Analysarbetet har dock till största delen genomförts kvalitativt genom användningen av the constant comparative method.Slutsats:       Studien som genomförts visar att kunderna inte äter färdigmat till kvällsmat särskilt ofta vilket innebär att det finns en marknadspotential. För att Collegium Restaurang & Konferens skall få kunderna intresserade av att köpa deras kylda färdigmat till kvällsmat, gärna oftare än de äter färdigmat idag, bör produkten vara lättillgänglig, resultera i en tidsbesparing men även vara ett socialt accepterat matval. Färdigmaten skall vara smakrik, ha tilltalande utseende, upplevas som nyttig och nylagad.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

In many biomedical contexts, e. g. when evaluating hearing disorders, the data obtained can be described as pairs (x1, y1), ?, (xn, yn) where x is a quantitative variable and y a 0/1 variable whose probability of taking the value 1 is a monotonic function of x. One way of analysing such data is to perform probit regression; thereby two parameters, b0 (= the constant) and b1 (= the slope) are estimated; the interest centres around m = -b0/b1, i.

In this thesis you will be able tofollow the design work of a drumtest. A tool that by having a rotatingdrum with equally positioned obstacleswill simulate the conditions a mountainbike rim will pass through.Initially there is a specification ofsome parameters and requirements thatthe design had to fulfill. There is alsosome brief background information aboutwhy a drum test is required for abicycle rim manufacturers and about thecompany Innolite Design AB that thisthesis is done for. After that itfollows an extract from conceptgeneration with the chosen concepts andsolutions but also some of the conceptsthat were not chosen.The thesis also contain a part where thereader cangain a deeper understanding of how thedesign works as well as some moredetailed facts about how the choice ofmaterials, their thicknesses, etc. havebeen made.

The energy consumption continues to increase as the use of electronics and energy consuming equipment increases. The use of fossil fuels has to be phased out for this to be sustainable in the long run while the use of renewable energy continues to increase. A renewable energy source is solar energy but the production of heat and electricity are today very expensive compared to other energy sources and an important task for the solar energy market to grow is therefore to minimize the production cost of the solar collectors while increasing its efficiency to produce heat and/or electricity. One way to convert solar energy into heat is by using solar collectors and electricity can be produced by utilizing the produced heat, or by applying solar cells.This thesis aims to recommend a reflective material for the next generation solar collectors from Absolicon and to recommend a commercially available coating for the receiver tube of the solar collector. A market study has been carried out to investigate the cost-related aspects along with the optical and durable aspects for the optical material of the solar collector.

In this degree project we wanted to investigate if there are any possibilities to get a higher income from grain growing by giving the grain to hens instead of selling it. We were also wondering if the manure has any value or if it only cost the egg producer money. If the egg producer cultivate his own grain and is able to store it in layer is there quite much money to earn. Expensive pasture makes it profitability to pay up to 1,35 Swedish crowns for a kilo of wheat. In our calculating we?ve used calculation from the company Lantmännen.

The purpose of this thesis is to investigate the possibility to make small, cheap and ultra low power sensor platforms, connected in wireless networks for monitoring of home and industrial environments. The concept is based on ideas from our supervisor, Jerry Lindblom. The developed system consists of a generic platform for different sensors, a receiver and software. A GPRS module from RO Rollytech AB and a database from Gema Industri AB have been modified and used to demonstrate an example of a complete system. To the platform, it is possible to connect any resistive sensor and any sensor that can act as a switch.

Because society?s demand for quality, efficiency at low cost is constantly increasing, companies are increasingly choosing to invest new methods to achieve these points. Those who manage to find ways to improve their processes are often the companies that have the greatest chance of becoming a winning player in the market. BIM is a new method that can reduce the internal costs while increasing communications between different parties. However there is disagreement about what BIM is and its purpose.

I dagens mångkulturella samhälle är det många barn som talar två eller flera språk. Det är viktigt att kunna bemöta flerspråkiga barn och ge dem rätt språkligt stöd vid behov. Denna studie baseras på MAINs testmaterial som är utformat inom ramarna för COST projekt IS0804 för bedömning av barns narrativa förmåga och använder berättelser till bildserier som ett sätt att samla in barns narrativer. Syftet med studien är att beskriva narrativ förmåga hos tvåspråkiga rysk-svensktalande barn och bidra med referensdata till ovannämnda projekt. Deltagarna var tio simultant tvåspråkiga rysk-svensktalade barn mellan 6:8 och 7:10 samt tre successivt tvåspråkiga barn.

Surrogate boycotts are highly threatening for corporations in terms of both economical cost and image damage. All corporations are due to our globalized environment and increased stakeholder fragmentation gradually more risking to become victims of surrogate boycotts, which of nature is hard if not impossible to predict and prevent. Corporations are generally recommended to build clear and strong corporate identities, which should be reflected in their most important stakeholders, as this will secure minimum damage on the corporate image. Even a surrogate boycott situation can have positive effects on corporations, especially in terms of image, as such situation increases the brand involvement and thereby make it possible for corporations to connect with important stakeholders on an emotional level. .