Rapporten är skriven för att dokumentera den befintliga installationen av ballast-, läns- och brandsystem ombord på fartyget M/S Calmare Nyckel. I enlighet med uppdragets specifika-tioner kommer även förslag på förbättringar att presenteras. Förslagen bygger till största del på fakta från en leverantör av ventilkomponenter och av klassen ställda krav på installationen. Förbättringarna beaktar i huvudsak minskade risker och ökad säkerhet. De största skillnaderna med de nya förslagen är att länsvattensystemet skiljs från de övriga systemen, de viktigaste funktionerna fjärrstyrs med hjälp av pneumatik och systemets komponenter märks enligt branchstandard..

The data acquisition system COMET developed by Saab AB contains a unit for signal conditioning and A/D conversion, called KSM. The varieties in signal conditioning constitutes of a number of specific PBAs and maintenance as well as reconfiguration of these are complicated not to mention costly. This thesis has aimed to investigating whether the signal conditioning circuits can be replaced by a general purpose, programmable solution. If so, how can this be done? The development has been carried out by evaluating ideas through the use of a laboratory environment and has resulted in an analog design for laboratory purpose.

Lansen Technology develops and sells alarm systems. The communication between the system devices are wireless. The radio protocol used by the system is developed by Lansen with the purpose to be energy efficient. The alarm systems target groups are individuals, businesses and government agencies. The current system is installed, configured and controlled from a control panel for all audiences.

Current technology offers many possibilities for remotecommunication. Nevertheless, people with cognitive and communicativedisabilities have limited access to common communication technology like textmessaging via a mobile phone. This study is part of the project Text messagingwith picture symbols - a possibility for AAC users and people with cognitiveimpairments. Semi structured interviews were used to investigate three menand four women?s experiences of using Windows mobiles with adaptedfunctions for text messaging.

Lansen Technology develops and sells alarm systems. The communication between the system devices are wireless. The radio protocol used by the system is developed by Lansen with the purpose to be energy efficient. The alarm systems target groups are individuals, businesses and government agencies. The current system is installed, configured and controlled from a control panel for all audiences.

Projektet avser en konceptuell utveckling av en produkt för Scania. Scania är idag en världsledande tillverkare av tunga lastbilar, bussar och industri- och marinmotorer med huvudkontor i Södertälje. Syftet för projektet har varit att utreda vilka funktioner som chauffören har behov av att kunna kontrollera utanför lastbilshytten. Genom att undersöka arbetsflödet, analysera och lyfta fram var förbättringar kan göras, utveckla ett effektivt och innovativt koncept för att sedan kunna ge rekommendationer för framtida arbete. Tanken har även varit att öka varumärket Scanias exklusivitet genom att tillföra ett mervärde för kunden.Rapporten beskriver metoder, genomförande och resultat för projektet som har utförts som ett examensarbete för civilingenjörsutbildningen Teknisk design vid Luleå tekniska universitet.

This thesis examines the possible beneficial effects of a temporary cooperation between a national brand and a private brand. The main hypothesis suggests that if a national brand wants to make a category extension to a remote product category, it should be able to decrease its risk by affiliating itself with a private brand. The national brand should through such a brand alliance be able to borrow some of the flexible characteristics that a private brand possesses to increase its associations with the new category. The survey consisted of 800 questionnaires with different cooperations between a private brand (ICA) and two national brands (Tropicana and Bravo). These were handed out to students in the universities of Stockholm.

This project has revolved around finding better ways of overseeing vibrations of the gearbox at a wind power station. The gearbox has been a huge problem at the stations located at Gässlingen and the sooner the warning of an incoming breakdown is at hand the more money you can save from preparations. The work has been carried out together with Askalon AB in cooperation with consults from ÅF. Askalon is a company with a department focused on overseeing vibrations and it is in collaboration with that department the work has been carried out. During this work, new positions for the sensors and new methods of gathering and analyzing data have been worked out. This was then implemented at a wind power station to be tried out on site.

This bachelor thesis describes the process of developing a two wheeled robot with activebalancing. The robot is designed to go straight ahead until it reaches a finish line. Then it shallstop to stand still balancing. The workload in the group has been divided according to theprevious individual projects, which are attached. The design of the robot is inspired by theconcept of the Segway.

The last decades have shown increased nitrogen leeching from soil to water recipients. This is inSweden mainly due to over-manuring of agriculture land, effectivization of drainage systems and thedeclining extent of wetlands. The accumulated amount of nitrogen in water doesn?t only make itunsuitable for use by humans and cattle, but also decreases the biological diversity as well as negativelyaffect tourism and fish industry. In the most severe cases shallow maritime grounds can be completelydepleted of oxygen due to decomposition of the increased amount algae and plankton growth.This study have the aim to describe and quantify the nitrogen leeching from the Genevad drainagebasin, located in southern Halland, Sweden.

This bachelor thesis describes the process of developing a two wheeled robot with activebalancing. The robot is designed to go straight ahead until it reaches a finish line. Then it shallstop to stand still balancing. The workload in the group has been divided according to theprevious individual projects, which are attached. The design of the robot is inspired by theconcept of the Segway.

As changes occur more frequently in IT- and software development, it is important for the companies to meet the demands and needs of its customer. The companies have to be able to adapt themselves continuously in order till fulfill its customers changing needs in an effective way, which results in big changes of the companies? structures. The more traditional way of working is often replaced with more alternative approaches as a response to the reputable deficiencies of its predecessors. As an effect of the rapid change and development some companies now see big potential in switching to more Agile and flexible methods and some companies have no choice but to change their way of working.

This work is a product development of a product which facilitates enduro drivers swallowing fluid while driving. My own experience of the problem and a custom survey gave me some frames and requirements of how such a product would look. To obtain the different concepts the method of brainstorming was used where I outlined the various proposals. The basic concept was that some kind of pump would build pressure in the liquid and when the user opens the nozzle the liquid will come out without the need to use the mouth to suck. The screening phase consisted of two steps.

In this qualitative study of students? methods of calculating subtractions, I have used interviews, subtraction exercises and analysis of teaching material. The purpose of my study was to explore which methods students in grade three uses when calculating subtractions. I also wanted to highlight which strategies the students use and their comprehension of the concept of subtraction. In the study, I also highlight the different pedagogical ideas on which the teaching material is based on and the students? choice of methods.  The study shows that the students choose to use the methods?deduct? and ?kind of number? independently.

This report is written for a consultant networking company with the purpose to review the development ofthe company's remote connections from a user friendly and security perspective.This includes an investigation of the possibilities to consolidate existing authentication methods foraccessing customers. The problem lies in the amount of methods being used. Through case study wefound that smart cards, SMS-service, software and hardware tokens exist.The only method feasible from a security perspective is smart cards. Since the method is not commonlyused by the company's customers a standardization of it would be counterproductive.Also, the purpose of this report is to investigate how the ongoing internal development of the remoteconnection will affect the company's clients. Within this framework we have also verified a designsuggestion.We interpret, after the completion of the case study, that the internal development of the remoteconnection is marginally affected by legal perspectives.