Remote work has become increasingly widespread due to advances in digital technology and changing organizational structures, a shift initiated by the COVID-19 pandemic. The purpose of this study is to examine how leadership influences employee motivation in remote work environments. The aim is to deepen the understanding of which leadership styles are most effective in maintaining and enhancing motivation when traditional psychical interaction is absent. To investigate this, a qualitative research approach was applied, consisting of semi-structured interviews with both individuals in leadership positions and employees. The findings indicate that leadership plays a crucial role in shaping employees' motivation in remote contexts.

The last decades have shown increased nitrogen leeching from soil to water recipients. This is inSweden mainly due to over-manuring of agriculture land, effectivization of drainage systems and thedeclining extent of wetlands. The accumulated amount of nitrogen in water doesn?t only make itunsuitable for use by humans and cattle, but also decreases the biological diversity as well as negativelyaffect tourism and fish industry. In the most severe cases shallow maritime grounds can be completelydepleted of oxygen due to decomposition of the increased amount algae and plankton growth.This study have the aim to describe and quantify the nitrogen leeching from the Genevad drainagebasin, located in southern Halland, Sweden.

This bachelor thesis is about an ultrasonic sensor, implemented in a bubble chamber in Artis. The sensor consists of the piezoelectric sensor and an electronic control circuit. The control circuit consists of a programmable microprocessor, PIC18F2420 and a circuit, which sends the excitation signal to the piezoelectric sensor, and later receives the echo. This bachelor thesis consists also of a theoretical study, which examines different techniques of liquid level sensing in a chamber. The study discusses which factors are important in liquid level sensing and examine accepted methods.

As an amateur it can be difficult filming from several angles at the same time as this requires several cameras. It´s also hard to film at occasions when it´s not appropriate to manoeuvre the camera manually. Systems for solving these problems already exist, but it´s either more expensive, professionalsystems or cheaper systems with limited functionality.The purpose of this project is to develop a cost efficient solution to the problem above that offers a better functionality then existing commercial systems. The biggest difference from existing products is the wireless video feedback from the camera to the remote unit.The result of the project is a system consisting of two units, a manoeuvre unit with a cradle for the video camera and a remote unit from which the operator can control pan and tilt of the video camera.Communication between the two units is wireless.On the remote unit there is a joystick and a display mounted. In addition to this, there is also an IR receiver that is capable of reading the signal from the cameras own remote and sending it to the manoeuvre unit.The manoeuvre unit is equipped with one motor to control the tilt function and one motor to control the pan.

When a car owner want to lock or unlock his or her car today, it?s preferable done by using aremote control. The system is really comfortable when the car owner is using the remote.A problem arises if a thief gets the remote.The thief doesn?t have to know where the car is parked, an approximate estimation where thecar is parked is enough.For instance, it?s enough to know which car park the car is parked in. If the thief knows that,he/she can repeatedly activate the remote control while looking for a car indicating with lightsand sounds.Because of the fact that a car usually indicates that it has been unlocked by making a shortsound indication, there will be no problem finding the car.The purpose with this project is to make a prototype which makes it harder for a thief to findthe car.

The Swedish energy companies have several different systems for data collection of the energy consumption of their clients. Often computerized remote meter readers are put in practice in order to register the energy consumption of large companies. The majority of household clients, however, are read off by the assistance of manual methods. Household power consumption is read off once a year. As a result, these clients are not debited for their actual consumption; their invoices during the year are the result of estimations.

The purpose of this thesis was to investigate different methods do measure velocity of pistons in pneumatic cylinders at Bosch Rexroth Teknik AB. Through information of velocity the adjustment of a cylinders damping can be done easier.A future transducer will be used by salesmen, service personnel and customers. This requires a sensor that is easy to apply and use. It is also desirable that the sensor is cheap. A number of possible methods to measure velocity have been presented.

The Swedish energy companies have several different systems for data collection of the energy consumption of their clients. Often computerized remote meter readers are put in practice in order to register the energy consumption of large companies. The majority of household clients, however, are read off by the assistance of manual methods. Household power consumption is read off once a year. As a result, these clients are not debited for their actual consumption; their invoices during the year are the result of estimations. At times when the electricity supply system is highly loaded, electricity is more expensive.

This study presents results for observing forest changes in Sweden using multi-temporal L-band satellite data and is a part of the JAXA?s ALOS Kyoto and Carbon Initiative. An extensive dataset of images acquired by the Advanced Land Observing Satellite Phased Array type L-band Synthetic Aperture Radar (ALOS PALSAR) is investigated for clear-cut detection in boreal forests in northern Sweden (Lat. 64°14? N, Long.

Den här uppsatsen behandlar stridsvagn122 och Remote Weapon Station (RWS). Det finns ett verkansglapp mellan dagens kalibrar 120 mm och 7,62 mm. Observationsmöjligheterna i vissa situationer är begränsade. Syftet med uppsatsen är att undersöka vilka nya förmågor och möjligheter till ytterligare ett verkansalternativ en fjärrstyrd vapenplattform kan tillföra stridsvagn 122. De frågeställningarna som behandlas är: Vad kan en fjärrstyrd vapenplattform tillföra inom området stridsteknik? Vem i besättningen skall bemanna systemet? Vad kan en fjärrstyrd vapenplattform tillföra inom området graderad verkan? Metoden som används är kvalitativ textanalys.

Several studies have analysed the relationship between Normalised DifferenceVegetation Index (NDVI) and radiative surface temperature. A main goal for moststudies have been to find the best method for carrying out land cover classificationsand to study land cover changes, based on a combination between the twoparameters. Since atmospheric components have a significant influence on bothparameters, most applications were based on multi-temporal data. The quality of theindividual values in such a combination is improved, but the biophysical justificationis uncertain. This study presents a different method, based on only the combination ofvalues that have been registered the same day and about the same time of the day.125 daily images of NDVI and 250 images of radiometric temperature were used inorder to analyse the relationship between (1) NDVI and radiative temperature and (2)NDVI and relative temperature difference between early morning and mid-day.Results between NDVI and radiative temperature show a significant negativecorrelation on areas where a distinct growing season develops, and a strong positivcorrelation where vegetation is abscent throghout the season.

The Multispectral Canopy Reflectance Model (MCRM) by Kuusk (1995) has beenused to simulate the reflectance of a sugarbeet canopy. The simulated reflectancevalues show high absorptance in the VIS area, compared to field measurements, andhigh reflectance values in the NIR area. The errors may be due to overestimation ofclorophyll content in the sugarbeet leaves and scattered light during fieldmeasurements. The estimation of the clorophyll content where carried out using thePROSPECT-model by Jacquemoud & Baret (1990).During the vegetation period, the state of the canopy moves towards a closed canopy,with sparse vegetation in spring. The MCRM-model was used to perform a ?spring?simulation, which was compared to the original simulation.

This Master Thesis documents the development of an On Board Diagnosis (OBD-II) interface for remote diagnosis of vehicles. The Master Thesis is part of a project at the company Wayfinder Systems in Lund. The purpose of this thesis was to design a scantool that communicates with a vehicle through its OBD-II port using relevant standards. In order to make the OBD-II interface development easier, a car simulator was first built. Both the car simulator and the OBD-II interface were implemented using a linux computer running a C-program with serial communication with an external electrical interface.

The depth-to-water-index (DTW-index) is derived from digital elevation models (DEM) to map soil wetness, in terms of distance from soil surface to the ground water table. The aim of this GIS based study was to investigate the existence of a relationship between DTW-index and forest site productivity (SP). The belief of such an assumed relationship was based on knowledge that the ground water level is related to site properties that can either promote or impede tree growth. Data primarily comprised rasters of the Krycklan catchment in northern Sweden and depicted DTW-index and a laser scanned vegetation height. The 100th height percentile of each pixel in the vegetation raster was assumed to mirror the top-height, letting it act as a relative measure of SP within a delineated area of equal stand age.

Att koppla samman nätverk över geografiskt olika platser har blivit allt vanligare i dagens samhälle. Rapporten kommer belysa olika WAN-lösningar för att göra detta möjligt. De olika lösningar som kommer belysas i denna rapport är att hyra egen fiber, lager2-länk, MPLS och även VPN. Det kommer göras jämförelser mellan dessa lösningar när det gäller kostnad, säkerhet, hastighet och tillförlitlighet. Detta har gjorts med vetenskapliga artiklar och intervjuer men rapporten innefattar även en praktisk tillämpling i form av ett experiment..