The power system modelled in this thesis work has been developed for simulationwhen e.g. the production in some part of the power system is changed. The powersystem has been modelled according to the swing mass of the system, the frequencydependency of the load and the turbine governor. The model determines the systemfrequency, the period of regulation and the power exchange between the differentsubsystems in the Nordic synchronized system.In this model the system frequency is assumed to be the same in all different parts ofthe power system and the voltage conditions in the power system are neglected. Forthat reason power swings does not occur between different subsystems in the powersystem, which usually occur as a result of the swinging connection between thetransmissions line.

This report covers the conceptual design of a new one person hybrid vehicle that is to be fast and convenient to drive on the roads. The vehicle is most of all supposed to be used as a commute vehicle but can also be used at other occasions as well.During the work with this project the group has focused on three larger areas, the outer design (body), wheel chassis and an ergonomically designed interior. The group was not able to just create these parts in 3D to get a trustworthy vehicle, hence number of other components and details were also created to get a better entirety.The outer design starts with idea generation and sketches and ends with a 3D model which is rendered to show how the final product is going to look. The design of the body has been going on during the entire work process due to new ideas and improvements that seemed interesting and had to be changed.The wheel chassis also started with idea generation, research and sketches. It ended up with a simulated 3D model which later on was mounted on the vehicle body to show how the vehicle is going to perform during usage.

During the spring semester 2012 Robin Westlund has accomplished ?Controlled interaction for more creative meetings - Summit Flexiwall? with the individual focus on social communication based on visual interaction in future office. The project was a part of the course Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which includes 22,5 ECTS Credits. The course is a part in the program Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.Assigner of the project was Moelven Eurowand AB with their head office in Örebro. The company manufactures and assembles entire room solutions for offices.

AbstraktHaving influence over questions that concern us is a part of the society that we live in, where every individual have the right to make her voice heard (Danell, 2006). For many decades, the school has had many different ways to give the students influence. Rönnlund (2013) is giving a historical overview of the history of students influence and enlighten us how the influence has changed over time. The influence from the students is very important and it is the students right to make their voices heard about things that concerns their work environment but also to affect their curriculum. The education in school should be fitted to every individual student (Danell, 2006).   According to Aaron Antonovsky (2007) our wellbeing is based on that we all can take part and deicide about the things we are meant to do.

Haemonchus contortus is the most important bloodsucking gastrointestinal nematode in small ruminants worldwide. It is often controlled by anthelmintics. Even though other methods to control are available, the most efficient way to treat an animal with clinically manifested haemonchosis is to use one of the available broad spectrum anthelmintics: benzimidazoles (BZ), macrocyclic lactones (ML) or imidothiazoles-tetrahydropyromidines or the narrow spectrum drugs salisylanilides or nitrophenols. Anthelmintic resistance (AR) against all groups of anthelmintics in nematode parasites has been reported from many countries, and even multiple AR has been observed. In this study I have investigated the resistance levels to all major classes of broad spectrum anthelmintics in a naturally infected flock of sheep of Red Maasai sheep (RM), Dorper sheep (D) and their offsprings on a research farm in Kenya.

The aim of this study was to explore and gain understanding of the situation between managers in different forms of human service organizations. I chose to use a qualitative method and conducted semi-structured interviews with five professional middle managers in the public sector. To accomplish my purpose, I worked on the basis of several questions. The questions dealt with the role of middle management and what it involves, how it is perceived and what the middle managers think of the specific requirements for them and their leadership in organizations that provide services relating to people.  As a result of the analysis I have used the theory of social roles that describes the meaning of the different roles and role conflicts that arise in connection with various and conflicting expectations. The review of the results shows that middle managers in human service organizations experience to have to deal with a complex leadership role.

This thesis is performed at Saab Bofors Dynamics in Karlskoga and investigates a technique for ranging with laser pulses. The investigated technique is called Constant Fraction Detection (CFD). Described briefly, the received laser pulse is split into two equal parts, where one part is delayed half the pulse width and inverted. This signal is added to the original pulse. The resulting curve has the shape of a laying S and the detection of the zero level is used to stop the time measurement.

Introduction: Reversal of a temporary loop-ileostomy is the final step after a long treatment for rectalcancer, an event that the patient has been looking forward to for a long time. Studies have shown that patients often have a significant impact on the bowel function after reversal of the stoma.Aim: To describe how the patient experienced the first time at home after reversal of a temporary loop-ileostomy due to rectalcancer. Method: Qualitative semi-structured interviews, with 15-20 patients who have undergone reversal of a temporary loop-ileostomy due to rectal cancer, will be conducted. The interviewes will be analysed using qualitative content analysis according to Graneheim & Lundman (2004). The patients will be recruited from the colorectal unit at Sahlgrenska University hospital/Östra and from the surgical unit at Kungälvs hospital.

The usage time is an important part of the specification for products powered bybatteries. The usage time is affected by a number of different elements; technical,environmental and how the product is being used. The method to determine theusage time is intended to define how measurements and calculations are to berealized along with influencing factors to keep in mind. With support from thismethod the intention is to gain control on how well the established usage time canbe expected to cohere with the real value and what affects the value.The study is done specifically for hearing protectors with battery powered built inelectronically functions. The functions can be level dependent function forambient hearing, 2-way radio communication, Bluetooth or FM-radio.The first chapter of the report describes the literature study performed in theproject.

Trademarks are distinguishing marks that are used by companies to highlight their goods or services to separate them from other companies. In Sweden, trademarks are protected by a certain Trademark Law called Varumärkeslagen. The law is a result of many years of improvements from earlier trademark laws. Since Sweden is member of the European Union, its laws are affected and in many cases inferior to laws of the Union. A new Trademark Law is about to be implemented in Sweden, thanks to a directive from the European Union.When a trademark is registered it is possible to use the symbol ® along with the trademark.

Trademarks are distinguishing marks that are used by companies to highlight their goods or services to separate them from other companies. In Sweden, trademarks are protected by a certain Trademark Law called Varumärkeslagen. The law is a result of many years of improvements from earlier trademark laws. Since Sweden is member of the European Union, its laws are affected and in many cases inferior to laws of the Union. A new Trademark Law is about to be implemented in Sweden, thanks to a directive from the European Union.When a trademark is registered it is possible to use the symbol ® along with the trademark.

ur society is today in a phase of development in environmental and sustainable thinking. Alarming reports show changes in climate caused by our load and exhaust of resources. The energy usage contributes to a big part of it, by its emission of carbon dioxide. The built environment uses around 40 % of the total energy consumption in Sweden and requests to strongly reduce it are presented from both EU and national level.This thesis brings up the subject of green building with a focus on how we can create more energy efficient buildings in projects of new construction. Since the construction industry today often fails to pass on the knowledge between different projects, as a return of experiences, the construction company Skanska suggested the topic for this thesis.

The boiling properties are an important quality issue of the potato. In order to obtain adequate boiling properties the growth of the potato needs to be controlled and interrupted at the right time. However, it is difficult to determine when to stop the growth. Specific gravity can easily be measured and can sometimes be used as a tool for estimating the boiling properties. This report discusses different aspects of the specific gravity of the potato and how it can be used as a tool to determine the appropriate time for vine killing.

The boiling properties are an important quality issue of the potato. In order to obtain adequate boiling properties the growth of the potato needs to be controlled and interrupted at the right time. However, it is difficult to determine when to stop the growth. Specific gravity can easily be measured and can sometimes be used as a tool for estimating the boiling properties. This report discusses different aspects of the specific gravity of the potato and how it can be used as a tool to determine the appropriate time for vine killing.

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.