The purpose of this master thesis was to study the water system for mechanically cleaned water at Skärblacka mill, in order to find and evaluate possibilities of using energy more efficiently. The thesis also includes an evaluation of the software tool ?Pumpanalys?Skärblacka mill produces pulp and paper. The large amount of water required is cleaned mechanically through filters and called mechanically cleaned water (MR0). The MR0 water is pumped out to the factory by four crude water pumps.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a Reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

För att barn med hörselnedsättning skall kunna få en normal tal- och språkutveckling samtkognitivt beteende är det av stor betydelse att hörselnedsättningen upptäcks tidigt.En av de beteendebaserade metoderna för att uppskatta spädbarns hörseltröskelvärden ärVisual Reinforcement Audiometry, VRA. Det är en konditionerande procedur där barnetassocierar ett ljud med ett visuellt mål. En audionom kontrollerar om barnet vrider på huvudetmot det visuella målet, som en reaktion på ljud stimuli, och belönar då barnet med en visuellförstärkning, så som en animerad bild på en skärm eller en mekanisk leksak.En ide på hur man kan göra VRA mer objektivt och mindre tidskrävande finns. Idén är attanvända eye tracking teknik som registrerar spädbarnets ögonrörelser och användaögonrörelserna istället för huvudvridningar som reaktioner på ljud stimuli.Detta examensarbete syftar till att testa och avgöra om VRA med eye tracking har godaframtidsutsikter. En prototyp i form av en datorapplikation har byggts och testats.Tester har utförts på tolv vuxna och nio spädbarn.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

In this study is being examined how cities can be planned in the face of rising water levels and extreme weather, due to the changing climate. The starting point has been to investigate how the problems can be tackled and how the positive sides of water in the city can be strengthened, and synergy effects and greater sustainability be achieved thereby. The method has been literature studies and case studies containing interviews and visits. Göteborg, Kristianstad and Arvika have been studied for discussions and ideas about adaptation. Today, building near water is very popular which brings both advantages and disadvantages.

The purpose of this thesis was to examine the ways in which the constructions of heterosexuality and gender in three Disney movies about princesses affect the power relations between men and women in the movies, and how discourses on gender and heterosexuality have changed over time. Research questions were:How do characters in the movies talk about gender and heterosexuality?How does the interplay between gender and heterosexuality affect the power relations between men and women in the movies?What are the likenesses and differences between movies from different time periods?Discourses were mapped out using a model based on Ernesto Laclau and Chantal Mouffe?s political theories. These discourses were then analyzed with a theoretical framework consisting of Yvonne Hirdman?s concept of gender system and gender contracts, Judith Butler?s view on the heterosexual matrix and an understanding of power relations based on Michel Foucault.

The different material layers as part of a road construction fill all a function so theroad becomes durable, safe, comfortable and aesthetically pleasing. Recently, anew group of construction materials started to play an important role in roadconstruction ? geosynthetics.This thesis addresses the two most common types ofgeosynthetics used in modern road construction, namely geogrids and geotextiles.The most common use of geogrids is Reinforcement of poor subgrade by usinggeogrid soil Reinforcement, which occurs when road material particles wedge inthe geogrid?s mesh. Geotextiles act partly as a barrier that prevents the finermaterial in the below ground from being mixed with coarser upper material andalso act as a load spreader.Road contractors often face a choice of whether geogrids and/or geotextiles areappropriate in a particular road project and also how much profit the choice mightbring. This phase in the tender calculation process is the intended scope of thisthesis.The thesis deals with both the "hard" cost-function aspects and the "softer" values e.g.

Detta examensarbete ämnar besvara huruvida Tekla Structures kan fungera som ett lämpligt 3D-modelleringsprogram för konstruktionsgruppen Nyanläggning och Bro inom Grontmij Sverige. Med goda erfarenheter av Building Information Modeling, s.k. BIM, och 3D-modellering inom andra delar av Grontmij så fanns en önskan att optimera gruppens arbetsprocesser med den senaste kunskapen inom området. Arbetet har fokuserat på att praktiskt modellera en fallstudie baserat på ett av Grontmij tidigare genomfört anläggningsprojekt. För att säkerställa fallstudiens representativitet valdes en plattrambro med stor mängd armering som ansågs ha en komplex geometri vilket potentiellt skulle fördelaktigt kunna representeras i 3D.Vid skapandet av 3D-modellen och tillhörande ritningar delades processen in i tre steg; modellering, detaljering samt visualisering.

In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The Reinforcement bar that holds the balcony runs through this heel.

The Island of Öland has one of the best wind climates for land based wind power in Sweden. An objective for the Island is to become self sufficient using electricity from renewable source of energy such as wind. There is currently 55 MW capacity installed on the Island and it is estimated that grid congestion will occasionally occur if more than 135 MW was installed.The aim of this thesis is to investigate he possibilities for load management by smart charging of electric vehicles, EV. The definition of smart charging is that the charging is done to some extent with an ICT-system, (information and communication technology) that correlates wind electricity generation to the charging of electric vehicles. The purpose is to avoid grid congestions on the sub-sea cable that connects Öland to the mainland because that in turn would curtail wind energy production.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

The purpose of this thesis was to examine the ways in which the constructions of heterosexuality and gender in three Disney movies about princesses affect the power relations between men and women in the movies, and how discourses on gender and heterosexuality have changed over time. Research questions were:How do characters in the movies talk about gender and heterosexuality?How does the interplay between gender and heterosexuality affect the power relations between men and women in the movies?What are the likenesses and differences between movies from different time periods?Discourses were mapped out using a model based on Ernesto Laclau and Chantal Mouffe?s political theories. These discourses were then analyzed with a theoretical framework consisting of Yvonne Hirdman?s concept of gender system and gender contracts, Judith Butler?s view on the heterosexual matrix and an understanding of power relations based on Michel Foucault.

The horse was domesticated about 6000 years ago. Since then humans have used the horse for different purposes, such as work force and in sports. Horses are social, group living animals that spend around 16-17 hours a day on grazing. Horses are often kept stabled in single boxes with a limited feeding time. The forage usually contains grain-based concentrates and roughage.

This thesis examines how teachers in physical education work with gender and gender roles in two religious schools in Stockholm. My main research questions were how the teachers relate to gender roles, if they think of gender when planning the lessons and do the boys or the girls get more attention from the teacher, if so, how do they get it?This study is based on interviews and observations, which makes it a qualitative study. The P. E.