AbstractThis thesis is the final part of the Innovation and Design Engineering Programme (180 ECTS credits)at the Faculty of Health, Nature and Engineering Science at Karlstad University. The extent of thisthesis is 22.5 ECTS credits and has been performed independently by Hannes Jernberg during thespring of 2013. Metso Paper Karlstad AB is the task maker of this project, and Arvid Johansson is thecompany Representative. Metso Paper Karlstad AB is one of the world leading developer andmanufacturer of tissue paper machines.In the current situation, the company has developed and patented a power management systembased on a Cross Flow Turbine. The current construction is limited to a paper width of 2.9 meters.The company wants to take advantage of all the opportunities provided by the patents, to develop aturbine solution paper machine with a paper width that is wider than 5.5 meters, and give the abilityto manufacture paper for lower energy consumption which is an important part of the production asit is very energy intensive.Problems arise with the increasing length of the turbine, ultimately resulting in that the deflectionbecomes too big and that the momentums, due to the increased torque the turbine blades breaks.By applying the design process, this work has resulted in a number of potential solutions to theproblem.

Products and services have for a long time competed with their brands. For some time now, cities have begun to compete with each other to attract visitors and other stakeholders to come to their town. It is important that the citizens feel as they are a part of the message that the city sends out in its communication.Cities are today working actively with their brands, much like regular companies, in order to create the profile and image in order to be competitive against other cities and places. Cities and places are part of a dynamic process which includes both positive and negative events. These events might have an impact on the brands, and therefore it is a necessity to be able to react on these events to make the most of positive things and deal with the negative in a way that minimizes the effects on the brand.Citybranding as a research field is quite new.

AbstractDegree thesis Solid content in Lime Mud By Andre Flodin Process operator program ? Umeå University 17/6 ? 2014 Pages: 21A thesis was made on Billerudkorsnäs production unit in Karlsborg where lime kiln in the causticising department of chemical recovery plant does not meet the required production. Causticising department is the final step in the chemical recycling unit. There, the filtered green liquor is mixed with lime to recover the cooking chemicals used in the pulp factory. The cooking liquid is called white liquor.

Background. Anesthetic-related death in small animal anesthesia is about ten times more common than in human anesthesia. Recent research identifies the early postoperative period as particularly risky and highlights the need for regular and careful monitoring of the veterinary patient during this period. Objective. The aims of this study were to investigate whether there are standard procedures in terms of regulated routine patient observations and record-keeping during the early postoperative period at Swedish veterinary clinics, and if there are any guidelines for monitoring the veterinary patient during recovery. Methods. A small survey including ten Swedish veterinary clinics was carried out as well as a literature review. Results.

Sweden signed, in 1992, the Convention on Biological Diversity (CBD) and has thus assumed responsibility for the indigenous biodiversity. That also means that Sweden has a conservation responsibility for the Swedish Friesian (SLB) (SJV, 2007a). In a survey conducted by the Board of Agriculture (SJV) in 1996, it appeared that there were around 780 cows and heifers of the SLB breed (SJV, 1997). SJV did in 2006 a plan for the development of livestock genet-ic resources and the number of cows of SLB was estimated at approximately 200. This meant that the SLB was in need of being conserved and SJV assumed it would be categorized as threatened.The primary objective of conservation of a breed is to reduce the loss of the original genetic variation (Lacy et al., 1995).

In the end of 1998 the company Holmen Skog AB was certified accordint to the FSC system with an area of 1 036 000 hectare. After that Holmen Skog AB has been working actively with the nature conservation in the forestry. In order to control the quality of the company?s nature conservation in final fellings they started a yearly inventory which is called BAKRUS (Judgement of ecological and culture care in relations to policies for a persevering silviculture). After 1999 the control was expended to include all actions in the forest.

Sweden signed, in 1992, the Convention on Biological Diversity (CBD) and has thus assumed responsibility for the indigenous biodiversity. That also means that Sweden has a conservation responsibility for the Swedish Friesian (SLB) (SJV, 2007a). In a survey conducted by the Board of Agriculture (SJV) in 1996, it appeared that there were around 780 cows and heifers of the SLB breed (SJV, 1997). SJV did in 2006 a plan for the development of livestock genet-ic resources and the number of cows of SLB was estimated at approximately 200. This meant that the SLB was in need of being conserved and SJV assumed it would be categorized as threatened.The primary objective of conservation of a breed is to reduce the loss of the original genetic variation (Lacy et al., 1995).

In the fall of 2014 a literature review and a scientific study of the topic; "... in the extent to which companies in the industry applies the evaluation of continuous improvement? was conducted at Mälardalen University. These studies are the foundation of this thesis.A strategic improvement is often divided into smaller steps of improvements at each hierarchical level from the top down through the organization. But if there is no response system that can confirm the results of these improvements back through the organization it is very hard to see if the improvements really are improvements or just changes and a waste of resources.

This paper is a study and comparison between the two Wireless LAN (WLAN) standards HiperLAN/2 and IEEE 802.11a. WLANs are used instead or together with ordinary LANs to increase mobility in for example an office. HiperLAN/2 is an European standard developed by ETSI and the IEEEs standard is American. A WLAN-card consists roughly of a Medium Access Control (MAC), Physichal layer (PHY) and an antenna. The antenna is the same for the different standards.

The aim of this paper is to describe the characteristics of the sport journalistic weblog. To achieve this we have used the following questions: Which themes are included in the sport journalistic weblog? How much text does the sport journalistic weblog content? How often is multimediality incorporated in the sport journalistic weblog? Which references occur in the sport journalistic weblog? How many hyperlinks occur in the sport journalistic weblog? How many of the hyperlinks is internal respective external? How often does the sport journalistic weblog offers possibilities to interaction between the journalist and the reader? How often does interaction between the journalist and the reader occur?The theories we have used is both online publishing and Jan Schmidt?s analytical framework on blogs. Online publishing describes an important part in our paper, online journalism, which in turn describes three important definitions for this paper; hypertextuality, multimediality and interactivity. Jan Schmidt?s theory is central to understand the phenomena, and functions as a starting point in the analyze part.

In conventional viscose manufacturing, a large amount of carbondisulfide is consumed. This amount has to be decreased to keep the production cost down and to reduce the environmental impact. The purpose with this work was to show if an enzyme treatment of a dissolving pulp could increase the degree of substitution in the viscose so that the amount of carbon disulfide consumed in the process could be decreased. Previous investigations by Kvarnlöf (2007), Engström et.al. (2006) and Henriksson et.al.

Many design agencies and designers like to see design as a longtime strategic investment for any company. However, knowledge of design as a strategic resource depends on ones professional background and ones knowledge of design as such. It is common today that clients meet design agencies and therefore design with a certain skepticism concerning its role in the company. Within the prodctdevelopment-process the company?s different functions meet.

Never before have so many moved so frequently as now. Mobility lies at the centre for the concern ofstates, business and technological development. Some even claim that we are witnessing a mobility turn inthe social sciences. However, as the capacity to move has increased so too has the control and surveillanceof mobility become more extensive. Since September 11, 2001 security has been the defining paradigm fora variety for actors.

Knowledge in reproduction in the Swedish lynx (Lynx lynx) is important forseveral reasons. Situated on top of the food chain, lynxes may be at risk of beingexposed to environmental toxins that could have adverse effect on reproduction.The population of lynxes is today managed by restricted hunting which demandsknowledge about both the lynxes numbers and their reproduction. In addition,lynxes may function as indicators of climate change for instance if their season ofheat would be earlier or prolonged due to a warmer climate. Today?s knowledgein reproduction in Swedish lynx is mainly based on information gathered fromradio collared animals.

Corporate Social ResponsibilityThis thesis intends to exam the strategic use of Corporate Social Responsibility within fifthteen different companies, classified/divided into three various industries. The aim is to compare the three different industries, to look for disparities and similarities in their use of CSR. The disseration looks into both variance and resemblance in the use of Corporate Social Responsibility between the companies within the same branch of trade and between the industries.The industries of intrestThe three industries that the study has focus on is consumer, manufacturing and service related industries. Where the consumer industry is classified as companies with direct sales towards private consumers, the physical citizen. The manufacturing industry is classified as companies that manufacture products but that does´nt sell their products directly to the regular consumer.