There are a great possibility to shorten the time between mowing and preservation by spreading of ley crops in connection to the conditioning. In this case the cellular respiration (the plants breeding that consume sugar until the crop is ensiled) should not continue as long and the forage will perhaps get a higher nutritional value. The capacity of the next machine could also be higher because the rake gives swaths with a lot of material. There is also a possibility that spreading of ley crops gives the material a more homogeneous content of dry matter and that gives a reduced growth of clostridium. This is particularly important when the method of harvest doesn?t include any mixing of the material like it does with a round baler or silagewagon.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

The main purpose of the project was to identify potential environmentally harmful substances which can be leached from rubber asphalt. A method for analysing asphalt was developed and three rubber asphalt materials were analysed after being cryogrinded. One of the materials was also tested in a road machine made for testing of asphalt paving. The particles created in the machine were analysed in the same manner as the cryogrinded asphalt materials.The asphalt materials were leached by water during 24 hours. The leachates were extracted with dichloromethane, dried with sodium sulphate and concentrated to a small volume.

Holmen Skog is currently using a GPS-program called TraktInfo, originally developed within the company. They are now planning to switch to a new GPSprogram or allowing the contractors to buy other programs available from the logging equipment manufacturers. To be able to offer this flexibility, Holmen Skog needs to obtain information about the features offered by the different manufacturers in their specific programs, and also when the manufacturers are planning to start selling programs adapted to the new standard called StanFord2010. According to the study, the manufacturers are hesitant to StanFord2010 and there has also been a lack of clear signals from the customers and clients about what kind of different new features to include in the programs. The feature most frequently used by forest machine operators today is the option to keep record of the harvester?s path by creating a ?log plot?. This feature was not used to its full potential however, since only one out of eight of the forwarders included in the study had computers that were compatible with the harvester?s computer.

The annual demands for forest fuels increases in Sweden. At present, large unutilized biomass resources is found in young, dense forests from which about five million oven-dry tonnes (ODt) (23 TWh) could annually be extracted as forest fuel. But harvesting small trees give high logging costs and new cost-efficient harvesting techniques are therefore required. The aim was to study the productivity of Vimek 608 BioCombi in forest fuel thinning of Lodgepole pine and to calculate the economy of the harvesting and estimate the thinning quality. The time study was performed in Åmarken in the county of Västerbotten.

Bricoleur, digitala varelser och brus utgör tre viktiga noder, runt vilka mitt konstnärliga arbete rör sig. Parallellt med ett antal av mina verk beskrivs dessa begrepp kortfattat..

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

The object with this thesis is to evaluate which of the catch crops oil radish and white mustard in combination with establishment method, give the most effective nitrogen uptake. The main purpose of the catch crops is to reduce leakage of nitrogen. They are sown after the main crop and killed before the next crop. In Sweden the farmers gets subsidies to establish catch crops. The thesis is limited to the trail L3-9010 sited at HS- Malmöhus, Borgeby Gård, 237 91 Bjärred, Sweden, 2007. Only treatments with oil radish, white mustard and the reference treatments were studied.

In the town of Väderstad which lies in the middle of Sweden, called Östergötland is Väderstad-Verken situated. It´s an international company which produce machines for land processing and sown to farmers all over the world. Väderstad-Verken is an expansive company with 750 employees. The turnover is 1.4 billion sek. Rapid seed-sower has become a popular machine since it was introduced in 1991.

Telia Telesvar is an automatic anwering machine that is provided in your stationary telephone at home. The drawback of this is that you cannot see if anyone has called you. This report describes how a terminal for Telias Telesvar could be designed. Telesvar terminal will show in a display if anyone called you and show the incoming number. It will also play the spoken message in a built in speaker.

BillerudKorsnäs is a leading global provider of primary fiber-based packaging materials and on Gruvöns Bruk in Grums, they have chosen to invest millions in the boiler at the facility to increase the total capacity of the factory. This results in the Pulp Flash Dryer at Gruvön being burden more, which makes it important that it is of great reliability and can be run with a high capacity. The reliability of the Pulp Flash Dryer at Gruvön is not as good as one could hope, which leads to reduced availability and production, as well as to increased maintenance costs. There are a number of different reasons for this, but all the casual links are not known.The purpose of this project was to perform a system analysis of the Pulp Flash Dryer to identify bottlenecks and the most critical parts from a capacity- and availability perspective. Appropriate methodology for the system analysis was used and would be used in a structured way to perform the analysis with data from the process and the maintenance system.

Within process or manufacturing industries, the production of goods and services or the products themselves may have negative side effects such as pollution. An important task for environmental policy is to control and limit these pollutions, for example via regulatory measures. Although, the efficiency of such measures vary greatly between different industries and an increasingly important task for environmental policy is then to encourage companies to engage in environmentally motivated innovation. Governments can utilize other measures than regulation to indirectly decrease pollution. This thesis aims to analyze such activities and how it affects the innovativeness of wastewater treatment, refrigeration and automobile manufacturing industries.

Considering that the price and demand for energy gradually has risen over the past decade and a wider discussion about the human impact on the environment has become increasingly more important and given a clearer role in modern society. This has contributed to increased incentives to reduce the use of fossil fuels and increase the use of renewable energy.The agriculture currently accounts for 20 % of Sweden's total greenhouse gas emissions. A way for an agricultural company like Wapnö AB to reduce their emissions could be to utilize existing renewable energy sources within their own premises.The report's aim is to create an energy audit of Wapnö?s existing energy system and how it changes with a future biogas plant in operation. The energy audit is used to illustrate how the company?s climate footprint could change.

Profit in first commercial thinnings of today is hard to achieve. This is because of prevailing pulpwood prices and because of high costs of logging and transport. To reduce these costs higher productivity is advocated. One way to increase the productivity is the use of multi-tree handling harvester heads. The aim of this study was to calculate logging and transport costs in first thinnings, where multi-tree handling has been used.

This study is a part of a larger project where the aim has been to evaluate different methods to assure the quality in stallion semen, due to the fact that some stallions in horse breeding have poor semen quality. The increased use of transport semen requires new methods to ensure good semen quality. In this part of the project the viability and concentration in fresh and cooled semen was examined with NucleoCounter SP-100. A comparison between two different commercially available semen extenders, Kenney?s and INRA 96, was made.