Emotron is a company specialised in developing, producing and marketing equipment to con-trol, monitor and protect processes and machinery driven by electric motors, with an applica-tion focus. Examples of uses for their products are fans, pumps, lifts and cranes.The project is to look at Emotrons end of line test. The company has seen that at the final test-ing there is a bottleneck that restricts the outflow and prevents an increase in the number of tested products.The purpose of this project is to review how Emotrons end-of-line test works today and if there is a possibility to make the test more efficient in such a way that the quality is not at risk, while increasing the outflow of tested products.The projects first step is to look at and analyse what is causing the bottleneck at the end-of-line. When the analysis is complete, the next step is to review whether there is a possibility to solve the bottleneck and if so in what way can this be done. Emotrons most overall objective of the project is to increase the outflow of the number of tested products without jeopardizing the quality.An analysis has been made on frequency inverters, soft starters and shaft power monitors.

In this thesis, three separate experiments have been performed on different aspects of the interaction between the causal agent of clubroot, Plasmodiophora brassicae, and its hosts. In the first experiment the pathotype of the P. brassicae single spore isolate, which is currently used to construct a reference genome, has been classified using the ECD bioassay. The disease severity of infected plants was scored according to two different scales and the pathotype was determined according to three previously published guidelines. The results were compared to previous published studies describing the e3 isolate. The life cycle of P. brassicae is not well understood.

The public spaces of the city from a social sustainability perspective, Jubileumsparken, a public space for the young, aims to see how public spaces can be open and accessible to all young people in the community. New public spaces can be created and formed by urban planning. A public space that is undergoing considerable development is Jubileumsparken, which is situated in Gothenburg. This area constitutes the case study for this thesis. Due to the commercialization in the neo-liberal society of today, there is a risk that economically weak people, such as the young, the unemployed or students, can?t take part of all public spaces.

The aim of this study is to investigate methods of collection development, the users? influence on selection and quality aspects, focusing on non-fiction literature in Swedish public libraries. To find out opinions of collection development, I use the method comparative literature study. Antonio Gramsci?s concept hegemony forms the theoretical background, and hegemony as concept is related to a library context by using Maj Klasson?s text on the librarians? different positions of authorities.

The survey Distanshandeln idag 2005, made by the Swedish postal service, tells us that web shops started to pop up in the 1990´s and began competing with the catalogue sells in the end of the decade. Ten years ago, it was said that the web shops would take over the distance trade market. Today we know that did not happen. Internet shopping accounted for 4, 2 % of all distance shopping in Sweden last year. Our inquiry is guided by the observation that the catalogue is still in use and moreover, it seems to have changed very little from when we were kids.

The production of cheese is in continuous development with objectives to in-crease productivity, achieve changes in shelf life and functional properties of the products. One concept in the development is to substitute milk fat with vegetable fats and oils in the manufacture of cheese. The objective of this study was to investigate effects on cheese yield and cheese quality of 4 different semi-hard analogue cheese products produced by substituting milk fat with vegetable fat, each analogue cheese with a specific mixture of vegeta-ble fat. As reference a cheese produced with anhydrous milk fat was used. The yield and recovery of fat and protein were determined by recording the weights of each cheese direct after press and after 20±2 days of storage and analysis of the composition of the cheeses after 20±2 days of storage. The cheese was fur-ther subjected for texture profile analysis in a TA-XT Plus Texture Analyser and analysed with Differential Scanning Calorimetry (DSC) to examine whether the fat behaves similar in the cheese as in pure form in respect to its thermal properties. The cheese yield was not significantly different when using different fats. Differ-ent amounts of water were absorbed during the water cooling.

In this thesis ? concerning didactics of literature ? I perform a reading and theoretical analysis of two pivotal works within reader-response theory, more precisely: Literature as Exploration (1938) and The Reader, the Text, the Poem ? The Transactional Theory of the Literary Work (1978), both written by Louise M. Rosenblatt. The object of this analysis is to examine whether Rosenblatts? theory and methodology can be used to accomplish understanding for ?the other?, what Martha C.

As a small and land scarce country, effective waste management is ofoutmost importance in Singapore. In this study the production of biogasthrough anaerobic digestion from the organic fraction of municipal solidwaste (OFMSW) was compared to incineration of the waste. At the momentalmost all of the OFMSW in Singapore is incinerated. Three differentscenarios were compared to the reference scenario (incineration): one with alarge scale biogas plant that can treat half of all OFMSW in Singapore, onewith a medium scale biogas plant about 15 times smaller than the large oneand one with a small scale biogas plant that can treat waste from e.g. ashopping center or a food center.By using life cycle assessment (LCA) the different scenarios were comparedin terms of global warming potential (GWP), acidification, eutrophication,energy use and land use.

Background: Coronary heart disease kills more than 7 million people worldwide each year. High levels of blood fat, cholesterol, contributes significantly to coronary heart disease. Lifestyle changes combined with lipid-lowering drugs, statins, is an effective treatment. But adherence to statins is low, not even a myocardial infarction always contributes to adherence. Adherence requires patient education and good communication between patient and physician.

In studies of serum, in the early 1930s, from patients with pneumonia, a factor was found. It could agglutinate certain pneumococcal species. This factor, which later became known as C-reactive protein (CRP), increased sharply during the early and middle stages of the disease. CRP was identified as an acute phase protein and found especially in bacterial infections. CRP is synthesized in the liver by stimulation of interleukin 6 (IL-6), which is produced by the monocytes, and consists of five non-covalently bound subunits.The aim of this study was to compare two different analytical instruments (Vitros 5.1 FS Ortho-Clinical Diagnostics and QuikRead CRP Orion Diagnostica) for CRP analysis.

Back and forth is a study on wayshowing at events focusing on the Siesta festivalin Hässleholm. For several years the interest in festivals has increased, whichhas contribute to expansion among festivals. The Siesta festival in Hässleholm istoday one of the major festivals in Sweden, attracting 10 000 visitors each year.The festival?s strong expansion has contributed to disorientation in the festivalarea, because it has never been constant from year to year. A side effect of this isthat the orientation is a constant problem.Therefore this study aims to investigate how a clearer route guidance systems onthe Siesta Festival can be designed based on existing designprinciples onguidance and orientation and how the information can be accessable towheelchair users and those with some kind of colourblindness?Surveys among festival visitors and interviews with the festival organizers for thefestival showed which navigation strategies that are most used on festivals.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

Mind the gap encourages you to beware of the interspaces. The project seeks to defend the gaps that occur in time and space and encourages the reader to care about the interruptions of the routine-like and planned, whilst also opening up a discussion about interaction and participation. Mind the gap is a project about the many opportunities the public space has in the contemporary city. What you have in front of you is the result of this project. As society constantly changes, new and different needs arise in the city and it is necessary that architects and planners understand and adapt to these changes. They have to be able to develop new ways of thinking and to challenge established perceptions of what the public space is and should be. This means being able to see that the public space could be different and to recognize the potentials for it to change. This project examines the underlying ideals of urbanism and investigates the potentials of the City when shaped by these ideals.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The conditions for a good silage process start with good wheather and choice of crop, then choice of harvesting machinery. The shorter and more mechanically treated crop, the better quality of the forage. (Pauly 1994). This study has examined the variations in chopping length depending on harvest method. Precision choppers works with a rotating chopping cylinder, where the crop is cut into pieces.