The aim and goal of this work has been to design and implement a voltage reference network for a 12-bit PSAADC, Parallell Successive Analog to Digital Converter. A chip containing the design has been sent away for fabrication. Because of the long processing time, no measurement data are presented. The main specifications for the voltage reference generator is to generate stable reference voltages with low noise and a good PSRR. Efforts has also been made to minimize the power consumption..

Too high levels of noise lead to various health problems and cost society billions of SEK peryear. In this thesis we have examined a model of the A40E articulated hauler at VolvoConstruction Equipment in Braås. We have tried to reduce cabin noise in an articulated hauler,while also providing a way on how to proceed with a machine when the cabin does not measureup to the sound requirement. The best way to find leaks were with a reference source of model4205 and its speaker HP 1001 from Brüel & Kjaer in the cab and then walk around and listen towhere the reference source was more prominent. In this way, we found that the edges and theplugs were sensitive areas.

The scarcity of qualified forest machine operators as well as the increased competition for competent machine operators among others from the mining industry in Norrland, were the reasons to investigate what attracts and what deters active and potential forest machine operators to the occupation. An interview study was conducted among four groups with four persons in each group. The groups were students in year 1 and 3 respectively at a forestry school at upper secondary school level as well as employees of a forest company and employees of contractors. The majority of all respondents were of the opinion that their interests in machines had been important for the choice of occupation. But for the active machine operators both the interest in the forest and their interest for machines have had importance for choosing this occupation.

The main purpose of this Masters thesis was to examine how the Internet and other electronic sources have affected public librarians use of printed reference sources. During the last couple of years the use of the electronic sources - in particular the Internet has become more established in the Swedish public libraries. Our aim was to examine if and how this has affected the use of the printed reference sources. This has been examined on the basis of the following factors: the gender and age of the librarians and how long they have served in the library. We also examined if the size of the library affects the use of the printed and the electronic reference sources and also which factors that are most important when librarians acquire reference sources.

Most companies have a bottleneck in their production, that is a constraining re-source. When the demand is higher than the capacity in the constraining resource it is impossible to produce the demanded output. This problem leads to delayed deliveries, unhappy customers and ultimately to decreased revenue. Bottlenecks therefore has a significant role in production and must be handled thereof.MW Power in Sävsjö, Sweden designs and manufactures water and steam boilers for the customer's unique needs. MW Power invested in a new plasma cutting ma-chine but the machine has not reached the expected capacity.

The vision of this thesis was to create a concept that can be used as a base for amachine construction. The purpose of this project was to use different methods todevelop a concept that on the best way meets the sat up requirements. This projecthas been divided into three stages/parts; principle, primary and the final solutionstage.This thesis has been conducted in collaboration with Västkustägg AB. It is aconstruction project designed to construct a machine that will automatically putlabels on the egg packages. Västkust AB wanted to automate this process.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.

The main purpose of this study was to establish to what extent undergraduate students use reference services, what knowledge they have about those services and what their views of them are.The survey took place at Lund University Library, UB1, the main library responsible for collections in social sciences, humanities, theology and law. A total of 476 undergraduate students were asked to fill in a questionnaire, 273 accepted. The study is quantitative and was carried out during the autumn semester, 1996.The results show that the service used most frequently by undergraduate students is the reference collection. The least used service is the Internet, more than 50 percent of the students never use Internet at the University Library. In general, students are very pleased with the service given by the reference librarians, and with the collection of reference books.

This paper describes the process of building a machine translation lexicon for use in the train and transport domain with the machine translation system MATS. The lexicon will consist of a Swedish part, an English part and links between them and is derived from a Tradostranslation memory which is split into a training(90%) part and a testing(10%) part. The task is carried out mainly by using existing word linking software and recycling previous machine translation lexicons from other domains. In order to do this, a method is developed where focus lies on automation by means of both existing and self developed software, in combination with manual interaction. The domain specific lexicon is then extended with a domain neutral core lexicon and a less domain neutral general lexicon.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

This Master's thesis aims to investigate the reference interview using the discourse analytical method discourse psychology. The reference interview has been studied thoroughly, and its importance has been proven repeatedly within the field of Library and Information Science (LIS). However, it has never been studied from a discourse analytical point of view before.The material for our study was gathered at Malmö public library, and consists of 10 tape-recorded and then transcribed reference interviews. Our study shows that there are several discourses within the reference situation. The dominating discourse, the reference interview discourse, is found within all the reference interviews.

Lars Höglund AB is one of Scandinavia?s most qualified manufacturers of sheet metal products and provides custom designed products of very detailed precision. One of the main methods of manufacturing is laser cutting. When Lars Höglund AB signed up a new customer, with high demands in tolerances for the products, Lars Höglund AB thought it would be necessary to know the capability of the laser cutting machine. Also the process of how to retrieve this capability was interesting. The capability will be researched for the following elements: Cutting right angles in squares with a corner radius of 1 mmCutting corners which are not right angleCutting of circles with constant radius Measurements were made on 150 pieces of sheet metal details, which had been cut out by the machine.  The data from the measurements where later used to study the capability.

Erythropoiesis is a complex and carefully controlled process which is mainly regulated by erythropoietin. Using flow cytometry cells in a blood sample can be analyzed one by one. ADVIA 2120 using flow cytometry for analysis of red blood cells (RBC) and reticulocytes. Red blood cell distribution width (RDW) is a component of the RBC method. RDW indicates size variation on erythrocytes and is measured as a percentage of the mean cell volume (MCV). By measuring the RDW anemia can be divided into makrocytic, microcytic or normocytic. Reticulocytes refract light more strongly than red blood cells because they contain some cellular debris. The number of reticulocytes in the peripheral blood reflects erythropoiesis in the bone marrow. The purpose of this project was that by approved methods to establish reference ranges for the parameters, RDW and reticulocyte counts.The individuals who participated in the study, n=124, were considered healthy and had varying ethnicity. Reference subjects had not donated blood the last six months and participation in the study was voluntary.The statistic evaluation includes examination of distribution, and reference ranges for both men and women were established using the 2.5:t and 97.5:t percentiles. The calculated reference interval for RDW was between 12.0 ? 14.3% and the calculated reference interval for reticulocytes was between 38.0 ? 112.8 x109 cells/L. The results showed a significant difference between males and females for the parameter reticulocytes was seen. The difference indicates that different reference ranges should be established for men and women (p<0,0001). No significant difference between males and females were seen for RDW (p=0,74) indicating that the same reference ranges can be used for both men and women. .

Neurography is the most objective and reliable measure of the peripheral nerve function, and it is used to diagnose both local and generalized neuropathies. Neurography can measure both motor and sensory nerve functions. The principle for sensory neurgraphy is to stimulate over the nerve and record proximal or distal from the stimulated electrode.At the Department of Clinical Neurophysiology, University Hospital Uppsala, a problem has been identified, in that young adult patients tend to show unexpected abnormal neurography values in relation to the expected, indicated by the reference limits, without clinical correlates. This concerns foremost the sensory amplitudes in median and ulnar nerves. The hypothesis is that the requirement of young adults? amplitudes is too high.