The study was conducted in Jönköping County Chamber of fibrillation and is about change and improvement of process modeling technology. The process for treating patients with fibrillation is in the need to evolve and improve. In order to develop the care they needed a current state description which usually is made with the traditional process modeling tool.Many scientists and health professionals is in the opinion that this technology gives a too rigid image to describe the care processes. It also does not sufficiently take into account the human aspects. This reasoning suggests that the process modeling technology in healthcare is in the need to develop multiple perspectives.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

Background: Folate is a water - soluble vitamin necessary for normal DNA synthesis among  other mechanisms. Folate deficiency can cause megaloblastic anemia resulting from abnormal erythrocyte d evelopment. At the Department of Clinical Chemistry, Linköping, analysis of folate is performed with Siemens ADVIA Centaur® XP which uses an immunochemical method with chemiluminimetric detection. Currently, the assay is conducted on serum, is poured off and frozen after 48 h and treated with light protection because folate is considered to be light sensitive.Methods: This study tested lithium heparin plasma for analysis of folate with Siemens ADVIA Centaur® XP with the aim to be able to perform a package of analyzes in anemia investigation from the same collection tube. Furthermore, the stability of folate was studied for up to 168 h and examined regarding light sensitivity.Results: Statistically significant higher values were obtained in the analysis of folate in lithium heparin plasma than folate in serum (p < 0,001).

This thesis for the Master of Science degree was performed at Solectron Corporation in Norrköping. The background for the thesis was a need to develop and build two test fixtures to automatize testing and adjusting of transmitter modules (TX-fixture) and receiver modules (RX-fixture) which are head devices in DWDM-systems. The basic elements for the test fixtures are: Test board, switch board and DC/DC board. The main function of the test board is to handle communication between the transmitter and receiver modules and supply voltage to these modules. The test board was insufficient and modified with a microprocessor to handle the communication between the PC and the receiver module.

The purpose of this Master?s thesis is to investigate the information use in teacher education students? degree projects. The first study is a reference analysis used to categorize the cited sources in 33 degree projects from the teacher education program at one Swedish university. The aim was to find out what types of sources were used, in particular the amount of citations to scholarly publications. The results of the reference analysis showed that the majority of sources used were text books.

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.

This bachelor of economics paper discuss that the increasing globalization has put the small companies in the Swedish textile and clothing industry in a situation where internationalization has become a necessity. Furthermore has the European Union lead to that this type of companies has to seek growth on foreign markets with great socio cultural distance from the home country, Sweden. Nowadays there?s no time to internationalize in the same course of action like before. Before, the Swedish companies begun their operations abroad in fairly nearby countries and only gradually penetrated more far-flung markets.

Purpose: The purpose of this study is to investigate possible links between short selling and the stock market movements using econometric test models. Methodology: A quantitative study carried out on the time series stock lending and OMX Stockholm 30 index. Information is gathered through qualitative interviews with specialists in the field of stock lending, and studies of relevant newspaper articles and reports. Theoretical approach: The theoretical frame of reference is a further consideration of supply and demand theory. The empirical study is implemented by the simple linear regression model and a vector autoregressive model (VAR).

Biofuels are getting more important as EU plans to replace fossil fuels with renewable energy sources. Because of that Sveaskog has chosen to invest in developing the handling process of logging residue. The company has a joined organisation for handling both round wood and logging residue. They are also working at integrating the forwarding of the logging residue with the rest of the harvesting team. Sveaskog is currently extracting 44 % of the available amount of logging residue.

AbstractThe Energy Declaration is a law that will come into effect October 1: Th 2006. This report has Värnamo municipality as principal and shall clarify what the estate owner in general and Värnamo municipality in particular need to know about this law. Another part that is going to be dealt with is how large the future need for energy experts in this field will be, and which competence that will be demanded for them.The work will in general deal with simplified energy declarations for apartment houses and public buildings, since these buildings are the first to be involved with energy declarations.The energy declaration will consist of a number of important components.? Energy power i.e. how much energy the building consume? If the ventilation control is done? If the radon measurement is carried out? Recommendations of measures to improve the energy power? Reference value to compare the buildings energy power againstAccording to the law the declaration shall been made by an independent expert, which will need certain information for this.

The purpose of this study is to examine, from a gender perspective, Utbildningsradions TV-program Hej Litteraturen! in the light of feminist literature studies conducted during the last twenty years. I want to examine if the feminist literature studies have had any impact on contemporary teaching material regarding the question of how much space in time is given to men versus women and which female authors are included in the literary canon. Hej Litteraturen! is a TV program produced in 2010 intended for high school teaching of literature history.   By conducting a content analysis in which I divide the study in a quantitative and a qualitative component, I have investigated how much space and time is given to female writers and how they are presented. My analysis draws on use Yvonne Hirdman?s theory of the gender system.   The result shows that the female authors get 37 percent of the total reference space and 42 percent of the time-space. The program has sought to describe male and female authors equally and gives them weight and relevance to the sections in a similar manner.    In conclusion, Hej Litteraturen! is a tutorial which embraces parts of the criticisms that have existed in historical literature review papers in general and literary history textbooks in particular. Hej Litteraturen! has worked on gender aspects of the program and by picking up contemporary authors as reference points for literary history in the present, the program contributes not only not only in renewing the literary canon, but also in balancing out the dominance of male writers in the history of literature..

The purpose of this thesis was to investigate if Swedish agencies preserve their websites according to the Swedish archival legislations and guidelines. As a theory the OAIS Reference Model (Open Archival Information System, developed by US Consultative Committee for Space Data Systems, CCSDS) has been used as a model to show how important it is to develop strategies for public digital information which has to be preserved for long term. The ingest function in the OAIS Reference Model demands that files are prepared for long term preservation and requires that the digital information fulfils established technical requirements.In the study the Swedish National Archive and their advices about preserving websites to archivists on the Swedish agencies are being studied. To control if the agencies meet the requirements for their management and preservation of their websites a survey was sent out to investigate if Swedish agencies preserve their websites. According to the survey result, 84 of 113 agencies preserve their websites in some way. If the technical requirements really was met could not be verified in this thesis, the results was relied on the responses from the authorities.

In Sweden, harvesting pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioenergy thinning. The aim of this study was to quantify the productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip cutting head during the bioenergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.

In many developing countries, among them Vietnam, contamination of agricultural land is a major issue that has public health implications. A fast growing population, rapid urbanization and industrialization have led to air and water emissions of potentially toxic elements (PTEs), such as cadmium (Cd). Earlier studies have shown that individuals with low iron (Fe) and zinc (Zn) status absorb larger quantities of Cd than those of adequate nutritional status. The purpose of this study was to investigate and compare the Fe and Zn intake from the foods consumed by women (15-45 years) in selected households in two agricultural villag-es in the Red River delta in Vietnam. In one of the villages the residents were involved in metal (mainly Fe) recycling activity, whereas in the other village the residents had agricul-tural production as main source of income. Interviews, followed by food intake calcula-tions, were performed.

This project is about Jönsaplan in Landskrona. Jönsaplan is situated at the center of Landskrona in a part called Södra centrum which the municipality is developing, mainly by building new residential buildings. Today, Jönsaplan is not a functioning square. This is due to a ferry terminal and its many fences that block the way for people. In this project, I have assumed that the ferry terminal will be moved somewhere else so that Jönsaplan can be a real square. By studying The Concise Townscape by Gordon Cullen and Byens uttrykksformer by Thomas Thiis - Evensen and three reference places, Daniaparken, Raoul Wallenbergs torg and Norr Mälarstrand, I came up with a number of guidelines for my design proposal for Jönsaplan.