Network RTK is a real-time technique for accurate positioning with Global Navigation Satellite Systems (GNSS). The technology means the use of correction data from a network of GNSS receivers with known positions (reference stations) to reduce the uncertainty in position for the user´s GNSS receiver (rover). However, this requires that the correction data can be transferred seamlessly to the user in real time. Commonly the corrections are transferred via mobile phones. The Swedish National Land Survey operates a nationwide Network RTK service, where users can receive correction data via GSM or mobile Internet (GPRS).

The purpose of this essay is to describe how Boverkets Byggregler has affected the cost ofnewly built houses from 2003 to 2012, to Boverkets Vision 2025. The purpose is also to findagent-principal relations in the construction sector.When investing in an energy efficient house the operating costs are reduced compared to aconventional house. But due to the lower operating costs, the investment cost rises. In thisstudy, we find out if it is economically viable to invest in an energy efficient house comparedto a conventional house from the customer's perspective.The study's approach has been qualitatively where we in collaboration with Derome Hus hadaccess to three conventional reference houses and a passive house and data that was necessaryto conduct viability assessments on houses. We conducted five interviews with people fromDeromekoncernen and Varbergs kommun.The calculation methods we have used in this study are present value method, annuity methodand a sensitivity analysis.

This Master Thesis is a part of PlymoVent?s business to customer plot, with the aim to investigate how the consumers receive the services that PlymoVent provides. With regard to PlymoVent's business strategy and reference theory, the demands of how to receive and monitor a supply chain for a better customer satisfaction where targeted. The findings refer to poor customer satisfaction due to obscure procedures in problem resolution and discrepancy handling, and vague transportation accuracy..

This essay deals with ruins from the perspective of their cultural values ??and the impact of add-ons, protective add-ons and caring actions affect these values. The issues in the essay are; What are the cultural values of a ruin?  How have ruins been used?  How are ruins treated today?Initially the definition of the concept ?ruin? is discussed, what is a ruin? A building has an architectural biography: the creation, destruction, change and the decay. The concept of ruin is considered to be a state of this decay, rather than a dead building.

The most common way to treat wastewater in Sweden today is by a combination of an activated sludge process and a chemical treatment. These processes are not very energy efficient and may not be the most environmentally friendly. That is why it is interesting to evaluate new alternative methods to see if they can be less harmful to the environment and help to a lower resource consumption. New techniques are tested in a pilot installation at Hammarby Sjöstad, Sjöstadsverket. To be able to evaluate these techniques in a wide perspective system analyses are conducted where different impacts can be considered, advantages and disadvantages in the systems.Five system structures for water treatment have been constructed in Matlab/Simulink in this study.

The aim of this study was to illuminate the experience of climacteric in women with different culture backgrounds. The method was a literature review. Results are made of nine scientific articles. Sex main themes come out. The results are showing that the experience of climacteric is varying from woman to woman and from culture to culture.

Soils in a metal contaminated site on Stångberget in Gusum in southeastSweden were investigated and compared to relatively unaffected soils a fewkilometres away. Pollution came from historical release of untreated flue gasesfrom a brass mill. The objective was to find information on how high the metalconcentrations are, if metals from the polluted soil affect the surroundings andif the metal contamination affects the microbial community. The soil wasinvestigated using several different methods, such as field XRF measurements,chemical analysis of metal, carbon and nitrogen content, pH, acid neutralizingcapacity, texture, soil depth, field leach tests, sequential extraction and microbialfunctional profiles. The study showed that copper and zinc concentrationswere above Swedish Environmental Protection Agency guidelines for lesssensitive land use on the entire investigated area.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Cement manufacture accounts for 3-5 percent of total global carbon emissions. There is a growing interest in reducing the environmental impact and conserve limited natural resources. In cement production, clinker productions consume 87.5 percent of the total energy consumed in the cement manufacture.Cementa has since many years, focused on reducing the environmental impact of cement production. The work has involved the entire production process from selection of alternative fuels to the development of cement with less clinker content. During 2013/2014, two new types of cement (Bascement and CEM II / B) will be introduced to the Swedish market.

The housing sector of today represents for almost 40% of the energy consumption, an energy consumption of which the major part consists of non-renewable energy sources. This is not sustainable and utilization of new energy-efficient technologies in buildings can be a step in the right direction, towards a sustainable energy society.This report has been made on behalf of and in cooperation with Älvstranden Utveckling AB in Gothenburg to examine how future energy-efficient technologies can affect the energy demand in energy-efficient multi-dwelling buildings.The report is based on Älvstrandens passive house, Hamnhuset, a house whose energy consumption is far below the BBR's requirements. The report looks at the opportunities for improvement within windows, insulation, solar energy technologies, as well as white goods. Computer simulations are then made to apply the selected technologies into a reference building. Technologies are selected from an energy efficient perspective and no account has been taken of other aspects such as the economy.

This is a thesis presents a differential gear which is found in a tracked vehicle called BvS10. The tracked vehicle is manufactured by BAE Systems Hägglunds AB in Örnsköldsvik, Sweden. The differential gear has a bolted house. The differential meets the requirement specifications, but the problem is that the bolts are sheared off because of the extreme torque that the differential is exposed to resist.Previous report on the differential show pictures of bolts which have been sheared off at the threads. This report is also includes three lists that explain seven different proposals which some are approved and some are not, and the report also presents the force, tensile, and shear stress.In a bolted connection there is both axial tension stress and radial shear stress, which can lead to wear out and broken bolts.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Burnt alun shale and lime is the residual product that was formed when alun shale was used as fuel to convert limestone to quick lime. The material contains arsenic, vanadium, molybdenum, cadmium, nickel, lead, and uranium among other elements. The aim of this paper is to examine the uptake of trace elements in vegetables grown on burnt alun shale and lime to determine whether or not the surrounding environment and humans are exposed to these elements by eating plant products. A cultivation trial was carried out where onion, carrot, and lettuce were grown on three mounds of burnt alun shale and lime in the Falköping area in Sweden. The treatments were burnt alun shale and lime mixed with peat, only burnt alun shale and lime, and a reference soil. The reference plots were natural soil mixed with peat adjacent to the mounds.

This paper aims to find out how to implement an information security management (ISMS) system that is based on ISO/IEC 27001-standard into a small organization with high employee turnover. The standard employs the PDCA-method as a course of action for implementing the standard. The reason for implementing such a system is to introduce information security to the organization and to maintain it despite the changes in management. The paper based it?s survey on a case study of a student nation in Uppsala, Sweden.

Purpose: The purpose of this paper is to investigate whether there is a correlation between the actuarial assumptions, of listed groups in Large Cap on the Nasdaq Stockholm, equity ratio and their pensionplans funding status.Method: The study is based on a quantitative research method, where the analysis of annual reports takes place. The quantitative research method has enabled the paper to perform related analyzes and comparisons of means between groups, for listed companies equity ratio and pension obligation, and the relation to its actuarial assumptions. Correlation measurements are made using a non-parametric method, Spearman's rho, then further tested using one-sided hypotheses t-test.Theory: The backbone of the thesis is presented using two theories, earnings management and the principal-agent theory. These theories are intertwined with the previous researches, which also dealt with the essay topic of earnings management in previous years and in other countries.Empirical: Correlation analyzes between the studied actuarial assumptions and corporate groups solidity and pension financial status is presentedusing tables and charts. These are further analyzed using hypothesis tests and scatterplots.Conclusion: All tests resulted in very weak correlation between the different variables and can there for not be classified as significant.