This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

Sitka spruce (Picea sitchensis) is not considered to be a native species to Swedish forests. It´s origin is the pacific coast of Northern America, an area that is dominated by a coastal climate which makes it likely to believe that it would be well suited for growing in the south-west of Sweden. This study aims to investigate the gain in production that can be reached by growing sitka spruce instead of Norway spruce (Picea abies) in the county of Halland. A regression model based on data from forest experiments was produced to explain the gain in production. This model was based on elevation and annual precipitation. The model was then used to create a map layer in arcGIS that shows the gain of volume in comparison to Norway spruce in percent. An analysis was carried out to find what share of the forestland in Halland county that fell into four different classes of production gain.

To be competitive in the corporate climate of today it is important to have effective logistic activities. A common resource within the internal logistics is forklift trucks, which are used to lift and transport material. It becomes more and more important to decide whether to buy, lease or rent the forklifts to obtain an optimal economic situation. Many companies have issues with internal pricing. It is difficult to price products and services correctly. It is common to price the overall instead of what it really costs.The purpose of the thesis is to present a model for the acquisition of forklifts for internal logistic operations, regarding financing and internal pricing, to obtain economic effectiveness and an optimal forklift fleet size. The study focused on a specific research question, and for this purpose interviews with experts were held, observations were made and a literature study was done.

Abstract The purpose of writing this thesis was to improve methods during requirements engineering phase. Usercentred system engineering has some problem areas, which are examined and verified to create a new guideline for developers. This guideline tends to make requirements engineering more effective and help developers create more concrete requirements. It is not uncommon that system development projects ends up with unsatisfied users or delay in deliveries. The reasons are different kinds of communication problems between users and developers during verification of requirements. There is a therapy model, called solution-focused therapy, used in family and individual therapy. The model focuses on solutions for the future instead of problems in the past.

The Swedish consumption of lamb a increasing, and today we yearly eat a kilo of lamb per person each year. As a consequence the Swedish degree of self production according to lamb is steadily decreasing, and is today about 39 %.Today Swedish Meats is now cooperating with the Swedish lamb breeders organisation to raise that percentage. At the same time the European Union presents a new agricultural reform, the MTR (Mid Term Review). The shape of this new reform is not yet fully known, but the general policy has been more or less outlined. The new reform is split into three propositions: the farm model, the regional model and the mixed model.

Due to a constantly increasing competitive pressure it is of great importance to constantly strive for improvements in order to gain competitive advantages. Lean Production is a concept that has been introduced with the aim to minimize waste and increase profitability. The purpose of this report is therefore to investigate how to perform effective planning according to the principles of Lean Production, in companys with customer exclusive products, through a case study at Sandvik Mining and Construction (SMC), and to investigate how SMC kan improve their planning of drifting rods at the production unit in Sandviken.The study started by creating a theoretical framework, to describe the subject planning and planning based on Lean Production. This frame work constituted the base for the case study which took place at Sandvik Mining and Construction, and also for the model and planning tool that has been introduced.The result of the study is partly a general model with factors that contribute to a more effective planning. These factors has beed identifed as SMED, which focuses on reducing set up times and in the end to facilitate the planning.

Syftet med vår uppsats var att med hjälp av Model Confidence Set (MCS) finna de bättre presterande modellerna bland de mest ?kända? och undervisade volatilitetsmodellerna. Vidare har vi även rankat dessa modeller inbördes. Eftersom prognoser om volatiliteten är mycket viktigt vid prissättningen på derivat, i detta fall ett räntederivat, är ämnet ständigt intressant. Med Model Confidence Set fann vi ett set av bättre presterande modeller utifrån vårt urval av ursprungliga modeller.

There exist several known methods for calculation of radio coverage for ground-based systems. As far as we know there are no equivalent methods for the case of flying platforms when the altitudes and speeds are significantly different to those of ground-based systems. This thesis describes the theoretical concepts behind calculations of radio coverage for flying platforms. An investigation is made to sort out what is important and possible to employ in a model for simulations. A method is described and implemented in a program for evaluation of flying radio systems.

ABSTRACT Infertility is a medical condition that affects approximately 16 % of Swedish couples in childbearing age and is a condition found in both men and women. When a couple has been trying to conceive for more than 12 months without success they need to see a health care provider. Infertility can be treated with medicine, insemination or assisted reproductive technology such as in-vitro fertilization (IVF) and intra-cytoplasmic sperm injection (ICSI). The aim of this study was to validate a morphokinetic selection model, KIDScore? D3 Basic, against morphological selection model that is currently in use at the Fertility unit at University hospital in Orebro.

This bachelor thesis has the purpose to visualize and document the air movementsprovided by different ventilation principles in an operating theatre. The visualizationwill be made as simple as possible in a physical model. The model and thedocumentation should be able to use in educational purposes.The study is based on the two most common systems for airflow, currently used inoperating theatres. The first principle is displacement ventilation in which the air issupplied at low velocity along the floor. The second principle is vertical parallel laminarairflow in which the air is compressed like a piston from ceiling to the floor.A review of literature resulted in the choice of size, design, and scale factor for themodel, as well as choices of ventilation principles and airflows.

 Genotyping can be used to link genetic variation among individuals to certain diseases or conditions. Some known disorders and states that are dependent on single nucleotide polymorphism (SNPs) are lactose intolerance, venous thrombosis, hereditary hemochromatosis and the difference in sensibility among people to metabolise drugs.In this project a new kit, TaqManÒ Sample-to-SNP KitÔ for extraction of DNA and preparation of the extract for genotyping with real-time PCR and allelic discrimination, was evaluated. QIAamp® DNA Blood Biorobot® MDx Kit was used as the reference method.The purpose of the comparison was to find a method that makes DNA extraction from blood samples cheaper and faster, but with the same reliability as the reference procedure.The results of the evaluation showed a complete agreement of the genotype results between the methods tested, which means that the new method was as reliable as the reference method. The costs of reagents and material would be reduced with 52% if the new method is adopted, that alone would result in a cost reduction of 144 000SEK a year with a sample volume of 650 samples/month. The time for DNA extraction would also be reduced with the new procedure. .

We have been looking at three different types of agriculture in Södermanland, in the middle east of Sweden. We call the different types for Intensive, Extensive and Mix. The purpose is to get an economic defensible plan for how to run different farm sizes. We also have been looking at the working hours and how many hours the different types will give. We have a farm called Taxinge Gods as our pilot farm. Taxinge Gods grow 407 ha land and is located 60 km southwest from Stockholm.

Today the ability to swim is taken for granted by most people. Most of Sweden?s adult population can swim which is reflected in the reduced number of accidental drownings. About 1900 AD when Sweden?s population was about five million the average drownings per year was 1100.

I denna studie har vi haft som avsikt att jämföra två modeller som förklarar avkastningen på aktiemarknaden. Modellerna är Capital Asset Pricing Model (CAPM) och Fama-French trefaktormodell(FF3). Undersökningen har gjorts på Nasdaq OMX Nordic Stockholm över perioden 2002 till 2012. Vi har valt att göra denna undersökning för att se huruvida FF3 med två extra faktorer kan förklara avkastningen på aktiemarknaden bättre än CAPM. Sex portföljer konstruerades och vi har visat att FF3 statistiskt signifikant förklarar mer än CAPM för fem av sex portföljer.

Accounting for financial instruments can either be based on a transactions approach or an eco-nomic approach. Under a transactions approach instruments are reported at cost whereas under an economic approach instruments are reported at fair value. Hence, under a transactions approach realization becomes a criterion for recognizing fair value fluctuations as revenue whereas under an economic approach it does not. A mixed model is defined as a combination of the transactions approach and the economic approach insofar it records some accounting items at cost and other items at fair value. The mixed model gives rise to an issue commonly referred to as an accounting mismatch.