This study looks into the possibility, and profitability, of expanding a pilot project that has been put into action at GGP Sweden AB in Tranås, a manufacturing company that produces front mowers. The pilot project is meant to give GGP Sweden AB a more precise control of the flow of goods from their suppliers, and its essence has proven to be quite similar to the Japanese Just-in-Time philosophy.The study has been divided into four separate areas; mapping, supplier selection, supplier evaluation and cost analysis. These areas represent a holistic perspective on the expansion of the pilot project and cover topics varying from methods of finding suitable JIT-suppliers, constructing Key Performance Indicators (KPI) to reviewing costs and assessing profitabilities.In this report, the reader will initially take part in the works of mapping GGP?s manufacturing unit, pilot project and supplier base, which results in a list containing the most suitable suppliers for a Just-in-Time based collaboration. Afterwards, the reader will be led into the area of supplier evaluation, where five KPI?s are created with the purpose of ensuring that GGP will be able to evaluate their suppliers and pilot project in an effective way.

Today small metal parts are mass-produced as for example rollers in cylinder bearings. At high velocity cutting the metal is cut with a great force in a scissor-like device. Both precision and repeatability is important to be able to guarantee good quality, but from an economical point of view it is also important to keep a great manufacturing capacity. The part of the process that is most time consuming is when the metal bar, that is about to be cut, is fed to the right position. Therefore it is interesting to examine if the time used for positioning can be reduced.

EuroMedstats forskar kring läkemedelsanvändning. Genom att utveckla kvalitetsindikatorer kan man mäta och jämföra kostnader och volymer i läkemedelsanvändningen mellan länder samt få en egen profil på varje lands användande. Syftet var att i tio EU medlemsländer jämföra skillnaderna i förskrivningsmönstret av diabetesmedel (ATC A10). Data på diabetesläkemedel, expedierade på apotek i öppenvård, bearbetades. Användningen analyserades på substansnivå och angavs i Definierad Dygnsdoser (DDD) och kostnad i Euro.

This paper presents the result of a master thesis project at 30 Hp, master of industrial engineering at Luleå University of Technology. The project was performed during 20 weeks, spring 2014, in collaboration with ABB Control Products in Västerås. The aim of the project was to evaluate two half-automated assembly lines for a new generation of contactors, the NAFC assembly lines (New AF Conductor). The aim and purpose of the project was achieved by answering the following questions:? How are the ergonomic working conditions at the NAFC assembly lines during spring 2014?? Which areas at NAFC assembly lines can be improved for the work environment?? How can the ergonomic work conditions improve at the NAFC assembly lines?Literature reviews were performed from earlier research papers and articles of the ergonomic, musculoskeletal and work environment subject, from where a number of chosen methods and tools were used to perform the ergonomic evaluation.

The purpose of this thesis is to study whether there is a demand for sawn wood products of large dimensions and planed goods among Wallnäs AB:s customers. The thesis consist of two main parts, one survey among Wallnäs present customers and another one which purpose is to increase Wallnäs customer base. Finally there is a chapter that describes what properties the raw material has to have in order to produce the demanded products. The survey to the present customers was conducted through a questioner. A sample of those who stated an interest for either sawn wood products of large dimensions or planed goods, were later contacted for a telephone interview. To reach out to new customers, relevant companies has been identified through the Swedish Trade Councils data base and through the member list of the Timber Trade Federation.

Rapid Granulator is one of the world's largest producers of granulators, which is a kind of grinderwho grinds discarded plastics to granules which later can be reused when pressure molding plastics.The company wanted help in developing a new, or alternatively extending their previous,measurement equipment. The old equipment was hard to use, required changes in the code fordifferent measurement scenarios and had a limited array of measuring quantities. Rapid had an ideaof a similar concept only with a greater number of input ports, better range of applicable sensors andan advanced yet easy to use interface. The system is supposed to be placed at Rapid's test departmentwhere it will be used as a tool for finding faults and provide data which can be used for furtherdevelopment of the granulators.The project's members accepted the task and immediately began searching for suitable componentsfor the system. After the search was completed a list of costs, limitations, sensors, I/O's anddevelopment environment was presented to Rapid's staff.

Visitor Centers were first established at various national parks in North America. Most Visitor Centers were built in the ten-year period following 1952. The purpose of the Visitor Centers was to welcome visitors and enhance their experience of the national parks. Today there are Visitor Centers all around the world, connected to different places or attractions. Many of the Visitor Centers that exist today, especially those in the national parks in North America, were built during the information society.

This report deals with activities that from a CSR perspective are considered to create a shared value for a medium-sized construction company in Sweden. The CSR definition used in the report is the European Commission?s since it reflects the valuecreating aspects of CSR, in contrast to the traditional philanthropic aspect of CSR.Companies in the building construction industry have difficulties identifying activities that create value in society and in the company. The aim with the project is to, from a CSR perspective, identify and evaluate value creating activities in a building construction company. The activities will be evaluated with respect to competitiveness and how they can be implemented into an organization.

The background for this degree thesis is a need to replace the existing seal used to protect equipment containing secret or sensitive equipment used by Swedish Defence. The target design should satisfy both the need for tamper evidence and reduce Life Cycle Cost. In developing a new design for a seal, additional benefits such as improved logistics support and indication of attack methods such as heat and solvents have been considered.The lack of guiding principles for end users of seals became evident during the interviews. Major concerns for the future are education of users, information about actions if a seal is broken and user liability.The design work was divided into several phases. A feasibility study was performed including investigation of theory of labels, materials and possible technologies.

This report was undertaken at the request of the Management and maintenance department of Swedish National Road Authority (Vägverket Region Sydöst) in Jönköping.In 1992, the management and maintenance of Swedish roads were laid out on external constructors. When putting out a tender for the work, the foundation is from a national set of rules which are in constant change. This report is limited to winter road upkeep.The trend in the invitation for tenders is that it is moving from the more conventional executional demands towards the less controlling demands. The downside of functional, less controlling demands is that it is difficult to articulate how to measure them. The order authority therefore has to find ways to make sure to get what has been paid for.In connection to the invitation for tender of winter road upkeep for 2005, the new set of rules, ATB Vinter 2003 was deployed.The main purpose of this thesis is to see which the big changes in the set of rules are and how these changes affect the organisation and activities of the constructor.It is also studied how the changes in execution is perceived by road users and how it affects the possibilities of the constructor to come as a newcomer to a new area of administration.Interviews and examination of sets of rules has led to a list of a number of changes that the constructors feel affect their work in any sense.Views from road users that have come in to the order authority have been scrutinized to see how they have experienced the change.

The amount of cargo has since the 1970s increased in Sweden and the road traffic accounts for a large part of the transported volume. In Stockholm County the amount of cargo is calculated to be doubled in size from year 2001 to 2020 which means a greater need for transport is required. Much of these transports are being carried out by haulage companies of varying sizes which acts externally as carriers for their customers. All of this despite a greater awareness, laws and demands regarding environmental performance.The trend shows that the haulage industry in Sweden are moving towards fewer but larger haulage companies, which means that the competition is getting tougher for the smaller haulage companies. Smaller haulage companies and research about their competitive strategies is a neglected part of this industry.

The purpose with this report is to make a contribution to Bodycote heat treatments workshop in Värnamo, how to introduce, establish and constantly improve its environmental system. The rapport will help Bodycote with there certifying in ISO 14001: s demand standard. Organizations who continuously work with environmental issues have a lot to gain. Two things an active environmental development process will convey are, building of thrust within the circle of customers, and great financial savings. An increasingly numbers of organizations realize the importance to introduce a functioning environmental system into their activity.

An attempt were made to record the 1st movement of Beethoven?s Op. 57, with the objective of performing it as close to Beethoven?s will as possible, in the tradition of the ?historically informed performance? movement.The result of evaluating source material rendered a list of the most relevant material for this study, and hopefully that might prove useful for other studies with similar objective concering HIP and composer-intention based ?autenticity?.However, Beethoven?s will was only vaguely captured in the limited source material accounted for in this study, rendering it moderate-to-small reliability. It?s probably possible to achieve a higher degree of goal achievement, given more time and through the utilization of music psychology to further extrapolate the detailed parameters of Beethoven?s presumed extramusical will.The recording made was not to my satisfaction and has strengthened my view that the interpreter should take council from the collected knowledge of scholarly sources but must ultimately remain free in whether and how to utilize that knowledge.Lastly, I?ve measured the bpm in the resulting recording with a error margin of ±0,02 s.

Problem: Klockbranschen är idag utsatt för stor konkurrens då tiden kan avläsas på ett eller annat sätt överallt, vilket gör att ett armbandsur inte längre är nödvändigt för att veta hur mycket klockan är. Ur & Penn försöker få armbandsur att uppfattas som en accessoar som varieras efter tillfälle. Konsumtion av klockor påverkas av de värderingar och traditioner som finns i samhället. Att förändra människors värderingar är en process som kan ta lång tid och som troligtvis är kostsam. Är Ur & Penn på rätt väg för att lyckas med sin målsättning?Syfte: Undersökningen baseras på följande frågeställningar: Hur väl uppfyller Ur & Penn sin målsättning? Vilka värderingar ligger till grund för inköp av armbandsur? Hur varierar värderingar beroende på typen av armbandsur? Vilka av dessa värderingar är av störst betydelse för kunder hos Ur & Penn? Av praktiska och resursmässiga skäl har vi valt att begränsa enkätundersökningen till Uppsala.

Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.