
Sökresultat:
151 Uppsatser om Recycling - Sida 8 av 11
Simulering av energieffektiviserande åtgärder för små- och flerbostadshus : Möjligheter för JM:s hustyper att uppnå passivhuskonceptet vid nybyggnation
The purpose of this project was to evaluate how energy efficiently some of JM?s residential buildings can become in standard production. What kind of measures are needed to achieve the level of energy demand that is included in BBR12 (Boverkets Byggregler)? What measures are needed for achieving a lower demand so that the buildings could be classified as passive houses? The investigation has included a single family house and two different types of apartment blocks.The simulation programs Enorm and VIP+ have been used to calculate the energy demand of the buildings. The results from the programs have been compared with the measured energy demand for the three buildings.
Tillvaratagande och återanvändning av träbyggnadsmaterial : tjänstedesign för återbruk inom byggsektorn
The purpose of this Bachelor degree project is to design different types of services that can increase the amount of re-used timber within the building sector and by that means improve their environmental efforts. By examining how the sectors environmental work concerning Recycling and re-using timber as a building material is getting on at present, conclusions have been drawn about what further could be done for improvement.The project has shown that there is a scarcity of information and statistics within the sector, but that there are efforts in progress to change this. Questionnaires have been sent to a number of companies working with demolition and utilizing re-usable materials in order to find out what kind of problems there are within the trade. Unfortunately the survey gave insufficient result due to the low reply frequency.It is obvious that active environmental work within the building sector is important and the knowledge acquired while working with the project has led to the design of three suggestions for services regarded as being of interest for improving the negative environmental impact caused by the sector:Suggestion 1 ? Sale of construction parts prior to the demolition of a buildingSuggestion 2 ? Re-utilization circulation when manufacturing buildingsSuggestion 3 ? Education in relation to the purchase of houses The positive and negative qualities of the suggestions have been examined with SWOT-analysis and further adaptions and the results have been interpreted.
Ledarskap och utveckling i en internationell kontext: en empirisk studie av tre svenska chefers ledarskap i en polsk arbetskontext
Världen idag kännetecknas av att vara en global arbetsplats där landsgränser inte utgör ett hinder för att människor från olika kulturer ska kunna samarbeta med varandra. Vi ser det som intressant att behandla den internationella arbetskontexten utifrån ett ledarskapsperspektiv och se på hur man som chef kan behöva anpassa sitt ledarskap till en ny kultur.Syftet med denna uppsats är att analysera hur tre svenska chefers ledarskap fungerar i och har behövt anpassas till en polsk arbetskontext. Utifrån tre svenska och tre polska chefers utsagor undersöker vi hur förberedelserna inför deras uppdrag gått till, vilka kulturella skillnader som cheferna har stött på samt vilka lärdomar de svenska cheferna tar med sig från sitt uppdrag.Uppsatsen är en empirisk studie som ägt rum inom företaget Stena Recycling AB. Metoden har varit kvalitativ och det empiriska materialet har samlats in genom semistrukturerade intervjuer med tre svenska och tre polska chefer.För att ledarskapet för en svensk chef i en polsk arbetskontext ska fungera behövs förmågan att kunna anpassa sitt perspektiv på organisation och ledarskap samt sin människosyn för att kunna hantera den nya situationen. Inför ett internationellt uppdrag är det viktigt att lära sig om den kultur som kännetecknar ens nya arbetsplats.
Ett hållbart kretslopp? : Förutsättningar för återföring av näringsämnen i humanavlopp till odlad mark; Norrköpings kommun som exempel
Studien undersöker om återföring av näringsämnen, huvudsakligen makronäringsämnena kväve och fosfor, från humanavlopp i Norrköpings kommun kan komma att ske på ett sätt som är i linje med naturvetenskapliga kretsloppsprinciper.Frågan om återföring av näringsämnen och dess problembild är av stor vikt då dagens flöden leder till både resursslöseri och miljöproblem som övergödning. Anledningen till att näringsämnen inte recirkuleras måste bero på någon form av oförmåga hos aktörerna att ta i tu med problematiken.Studien analyserar olika aktörers perspektiv. Aktörerna beskrivs dels i ett nationellt perspektiv men den huvudsakliga fokuseringen ligger på kommunal nivå. Detta på grund av att kommuners roll inom området innebär att de är ytterst ansvariga för utformningen av avloppssystem. Aktörer som agerar i förhållande till kommunen har därför undersökts närmare genom intervjuer med olika representanter för aktörerna.
Development of green space in Dar es Salaam, Tanzania
In Dar es Salaam, as in many cities in developing countries, green areas are decreasing due to the fact that the growth of buildings, infrastructure and services has become a priority. As the population increases more buildings and infrastructure are needed and much of the building activity takes the form of uncontrolled settlements, which encroaches the public green space. Dar es Salaam has approximately three million inhabitants, of which about 70 percent are living in informal settlements.
The aim with this study is to make a design proposal for a park and recreation area where the Msimbazi river basin in the centre of Dar es Salaam is today.
The basin consist of a few playing fields, footpaths and some urban farming, but apart from this it mostly consists of unused grasslands, swamps and forests. Because it is an unsafe place and badly connected to the rest of the city infrastructure, it has become a barrier. The annual flood combined with the constant still shallow water creates a good breading ground for malaria mosquitoes.
Buskröjning längs skogsbilvägar : en produktivitetsstudie av två kättingslagor
To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material Recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.
Interna processer : Modell för ett effektivt returstålsflöde
The last decade has created an increasing pressure on companies to decrease their impact on the environment and to increase their effectiveness of Recycling the company?s resources, especially for the steel industry. Companies have also started to realize the economic aspects of an effective internal reverse logistics. In the past the value of an effective internal reverse logistic was something that companies tend to underestimate and there are few academic studies done in this area. The purpose of this essay has been to identify key factors to create an effective in plant storage, transport, sorting and handling of returned steel. From these factors a generalized model for creating an effective return steel flow will be developed.
Kartläggning av materialflödet i Peabs försörjningskedja till byggarbetsplats med SCOR
The construction industry has not undergone the same logistical development as the manufacturing industry; this, in combination with increased material price, leads to the fact that the construction industry must be improved. This master thesis is a part of the research cooperation Brains & Bricks goal of reducing production costs for the construction sector by 25 percent. Brains & Bricks is a cooperation between Linköping University, Peab and Katrineholms municipality. The master thesis aims to identify improvements in the flow of material, the Supply chain operation reference, SCOR, model has been used and the work has been carried out on one of Peab?s construction sites. At present the business is characterized by bad communication both between the construction site and the office as well as between the construction site and suppliers.
Reducering av kassationer på Cloetta Fazer AB
This master?s thesis was performed during the fall of 2006 at Cloetta Fazer AB in Ljungsbro. Cloetta Fazer is the market leader in Scandinavia of manufacturing confectionary and chocolates. The purpose of the project has been to identify causes that impact the quantity of waste in production as well as a cost/benefit analysis of the solutions that can reduce the problem of production waste.The work includes four production lines that are individually designed depending on what kind of product that are produced on the line. By using qualitative and quantitative methods such as focus groups, interviews and observations data has been collected.
Avfallshantering på byggarbetsplatser : Potential för en miljöeffektiv avfallshantering
This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention Reuse Recycling Energy recoveryLandfill The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.
Landskapsplanering ur ett hållbarhetsperspektiv :
Environmental problems are accelerating with energy consumption and the release of greenhouse gases as the major issues. This affects landscape planning mostly through environmentally hazardous transportation and heating of buildings. In environmental work, the term "Sustainable development" is often used. This term was coined in the Bruntland report in 1987. A number of frameworks have been developed to clarify the term and to remind the user about relevant aspects of sustainability.
Livscykelanalys: Pelletspanna från kvänum energi
This study will identify the environmental impact in terms of carbon dioxide for a boiler house on behalf of Kvänum energi. The boiler central consists of a main building, which in turn contains multiple components such as boilers, pipes, etc, the boiler central uses pellets fuel. It also includes a silo and an ash container. The total weight of the boiler is about 63 tons. Each boiler has an output of 600 kW; the central includes three boilers with room for a fourth if necessary.
Värmeåtervinning från smidesprocess : Värme från smidesprocess blir varmvatten
SammandragDetta examensarbete utförs i samarbete med företaget Componenta Wirsbo AB. Componenta smider detaljer till den tunga fordonsindustrin. Företaget använder sig av sänksmide där materialet formas genom slag från två rörliga verktyg. Smitt material har mycket goda hållfasthets egenskaper samt en mycket homogen struktur.Företaget har som miljömål att minska sin uppvärmningsenergi med 5 %. Componenta arbetar även med ett Leanprojekt som ska leda till en mer kontinuerlig produktion.
Ett tält för sju dagar : Festivaltält i papper
SummaryAt the summer festivals and it?s campsites there are each year thousands of tents left behind. Last year, at the Peace and Love festival in Borlänge, 220 tons of garbage was left behind at the festival area, much of which is tents. 69% of festival goers have at some point left behind a tent on a festival campsite. Many of these tents is purchased very cheaply, for a single festival.
Analys av system för rening av avloppsvatten i en anaerob membranbioreaktor
The most common way to treat wastewater in Sweden today is by a combination of an activated sludge process and a chemical treatment. These processes are not very energy efficient and may not be the most environmentally friendly. That is why it is interesting to evaluate new alternative methods to see if they can be less harmful to the environment and help to a lower resource consumption. New techniques are tested in a pilot installation at Hammarby Sjöstad, Sjöstadsverket. To be able to evaluate these techniques in a wide perspective system analyses are conducted where different impacts can be considered, advantages and disadvantages in the systems.Five system structures for water treatment have been constructed in Matlab/Simulink in this study.